From: Potin Lai <potin.lai@quantatw.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrick Williams <patrick@stwcx.xyz>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Potin Lai <potin.lai@quantatw.com>
Subject: [PATCH v5 2/2] dt-bindings: hwmon: Add sample averaging properties for ADM1275
Date: Wed, 2 Mar 2022 15:08:31 +0800 [thread overview]
Message-ID: <20220302070831.23822-3-potin.lai@quantatw.com> (raw)
In-Reply-To: <20220302070831.23822-1-potin.lai@quantatw.com>
Add documentation of new properties for sample averaging in PMON_CONFIG
register.
New properties:
- adi,volt-curr-sample-average
- adi,power-sample-average
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
---
.../bindings/hwmon/adi,adm1275.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index 223393d7cafd..b191abddf20b 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -37,6 +37,72 @@ properties:
description:
Shunt resistor value in micro-Ohm.
+ adi,volt-curr-sample-average:
+ description: |
+ Number of samples to be used to report voltage and current values.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+ adi,power-sample-average:
+ description: |
+ Number of samples to be used to report power values.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adm1075
+ - adi,adm1276
+ then:
+ properties:
+ adi,volt-curr-sample-average:
+ default: 128
+ adi,power-sample-average-enable: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adm1275
+ then:
+ properties:
+ adi,volt-curr-sample-average:
+ default: 16
+ adi,power-sample-average-enable: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adm1272
+ then:
+ properties:
+ adi,volt-curr-sample-average:
+ default: 128
+ adi,power-sample-average-enable:
+ default: 128
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adm1278
+ - adi,adm1293
+ - adi,adm1294
+ then:
+ properties:
+ adi,volt-curr-sample-average:
+ default: 128
+ adi,power-sample-average-enable:
+ default: 1
+
required:
- compatible
- reg
@@ -53,5 +119,8 @@ examples:
compatible = "adi,adm1272";
reg = <0x10>;
shunt-resistor-micro-ohms = <500>;
+ adi,volt-curr-sample-average = <128>;
+ adi,power-sample-average = <128>;
+ adi,power-sample-average-enable;
};
};
--
2.17.1
next prev parent reply other threads:[~2022-03-02 7:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-02 7:08 [PATCH v5 0/2] hwmon: (adm1275) Add sample averaging binding support Potin Lai
2022-03-02 7:08 ` [PATCH v5 1/2] hwmon: (adm1275) Allow setting sample averaging Potin Lai
2022-03-02 7:08 ` Potin Lai [this message]
2022-03-02 9:37 ` [PATCH v5 2/2] dt-bindings: hwmon: Add sample averaging properties for ADM1275 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220302070831.23822-3-potin.lai@quantatw.com \
--to=potin.lai@quantatw.com \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzk@kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®