mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jinzhou Su <Jinzhou.Su@amd.com>
To: <rjw@rjwysocki.net>, <linux-pm@vger.kernel.org>,
	<srinivas.pandruvada@linux.intel.com>, <dsmythies@telus.net>
Cc: <ray.huang@amd.com>, <viresh.kumar@linaro.org>,
	<todd.e.brandt@linux.intel.com>, <linux-kernel@vger.kernel.org>,
	<deepak.sharma@amd.com>, <alexander.deucher@amd.com>,
	<xiaojian.du@amd.com>, <perry.yuan@amd.com>, <li.meng@amd.com>,
	<jinzhou.su@amd.com>, Jinzhou Su <Jinzhou.Su@amd.com>
Subject: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
Date: Fri, 4 Mar 2022 14:07:21 +0800	[thread overview]
Message-ID: <20220304060724.314582-2-Jinzhou.Su@amd.com> (raw)
In-Reply-To: <20220304060724.314582-1-Jinzhou.Su@amd.com>

Add frequency, mperf, aperf and tsc in the trace. This can be used
to debug and tune the performance of AMD P-state driver.

Use the time difference between amd_pstate_update to calculate CPU
frequency. There could be sleep in arch_freq_get_on_cpu, so do not
use it here.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Co-developed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
---
 drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
 drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
 2 files changed, 78 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h
index 647505957d4f..35f38ae67fb1 100644
--- a/drivers/cpufreq/amd-pstate-trace.h
+++ b/drivers/cpufreq/amd-pstate-trace.h
@@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
 	TP_PROTO(unsigned long min_perf,
 		 unsigned long target_perf,
 		 unsigned long capacity,
+		 u64 freq,
+		 u64 mperf,
+		 u64 aperf,
+		 u64 tsc,
 		 unsigned int cpu_id,
 		 bool changed,
 		 bool fast_switch
@@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
 	TP_ARGS(min_perf,
 		target_perf,
 		capacity,
+		freq,
+		mperf,
+		aperf,
+		tsc,
 		cpu_id,
 		changed,
 		fast_switch
@@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
 		__field(unsigned long, min_perf)
 		__field(unsigned long, target_perf)
 		__field(unsigned long, capacity)
+		__field(unsigned long long, freq)
+		__field(unsigned long long, mperf)
+		__field(unsigned long long, aperf)
+		__field(unsigned long long, tsc)
 		__field(unsigned int, cpu_id)
 		__field(bool, changed)
 		__field(bool, fast_switch)
@@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
 		__entry->min_perf = min_perf;
 		__entry->target_perf = target_perf;
 		__entry->capacity = capacity;
+		__entry->freq = freq;
+		__entry->mperf = mperf;
+		__entry->aperf = aperf;
+		__entry->tsc = tsc;
 		__entry->cpu_id = cpu_id;
 		__entry->changed = changed;
 		__entry->fast_switch = fast_switch;
 		),
 
-	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
+	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s fast_switch=%s",
 		  (unsigned long)__entry->min_perf,
 		  (unsigned long)__entry->target_perf,
 		  (unsigned long)__entry->capacity,
+		  (unsigned long long)__entry->freq,
+		  (unsigned long long)__entry->mperf,
+		  (unsigned long long)__entry->aperf,
+		  (unsigned long long)__entry->tsc,
 		  (unsigned int)__entry->cpu_id,
 		  (__entry->changed) ? "true" : "false",
 		  (__entry->fast_switch) ? "true" : "false"
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 9ce75ed11f8e..7be38bc6a673 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
 
 static struct cpufreq_driver amd_pstate_driver;
 
+/**
+ * struct  amd_aperf_mperf
+ * @aperf: actual performance frequency clock count
+ * @mperf: maximum performance frequency clock count
+ * @tsc:   time stamp counter
+ */
+struct amd_aperf_mperf {
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+};
+
 /**
  * struct amd_cpudata - private CPU data for AMD P-State
  * @cpu: CPU number
@@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
  * @min_freq: the frequency that mapped to lowest_perf
  * @nominal_freq: the frequency that mapped to nominal_perf
  * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
+ * @prev: Last Aperf/Mperf/tsc count value read from register
+ * @freq: current cpu frequency value
  * @boost_supported: check whether the Processor or SBIOS supports boost mode
  *
  * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
@@ -102,6 +117,10 @@ struct amd_cpudata {
 	u32	nominal_freq;
 	u32	lowest_nonlinear_freq;
 
+	struct amd_aperf_mperf cur;
+	struct amd_aperf_mperf prev;
+
+	u64 freq;
 	bool	boost_supported;
 };
 
@@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata,
 					    max_perf, fast_switch);
 }
 
+static inline bool amd_pstate_sample(struct amd_cpudata *cpudata)
+{
+	u64 aperf, mperf, tsc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	rdmsrl(MSR_IA32_APERF, aperf);
+	rdmsrl(MSR_IA32_MPERF, mperf);
+	tsc = rdtsc();
+
+	if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
+		local_irq_restore(flags);
+		return false;
+	}
+
+	local_irq_restore(flags);
+
+	cpudata->cur.aperf = aperf;
+	cpudata->cur.mperf = mperf;
+	cpudata->cur.tsc =  tsc;
+	cpudata->cur.aperf -= cpudata->prev.aperf;
+	cpudata->cur.mperf -= cpudata->prev.mperf;
+	cpudata->cur.tsc -= cpudata->prev.tsc;
+
+	cpudata->prev.aperf = aperf;
+	cpudata->prev.mperf = mperf;
+	cpudata->prev.tsc = tsc;
+
+	cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz), cpudata->cur.mperf);
+
+	return true;
+}
+
 static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
 			      u32 des_perf, u32 max_perf, bool fast_switch)
 {
@@ -226,8 +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
 	value &= ~AMD_CPPC_MAX_PERF(~0L);
 	value |= AMD_CPPC_MAX_PERF(max_perf);
 
-	trace_amd_pstate_perf(min_perf, des_perf, max_perf,
-			      cpudata->cpu, (value != prev), fast_switch);
+	if (trace_amd_pstate_perf_enabled() && amd_pstate_sample(cpudata)) {
+		trace_amd_pstate_perf(min_perf, des_perf, max_perf, cpudata->freq,
+			cpudata->cur.mperf, cpudata->cur.aperf, cpudata->cur.tsc,
+				cpudata->cpu, (value != prev), fast_switch);
+	}
 
 	if (value == prev)
 		return;
-- 
2.27.0


  reply	other threads:[~2022-03-04  6:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-04  6:07 [PATCH V2 0/4] Add tracer tool for AMD P-State driver Jinzhou Su
2022-03-04  6:07 ` Jinzhou Su [this message]
2022-03-04  6:42   ` [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module Huang Rui
2022-03-04 18:49     ` Rafael J. Wysocki
2022-03-07  2:53       ` Huang Rui
2022-03-09  1:23     ` Su, Jinzhou (Joe)
2022-03-09 13:29       ` Huang Rui
2022-03-04  6:07 ` [PATCH V2 2/4] tools/power/x86/intel_pstate_tracer: make tracer as a module Jinzhou Su
2022-03-04  6:44   ` Huang Rui
2022-03-04  6:07 ` [PATCH V2 3/4] tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state Jinzhou Su
2022-03-04  6:48   ` Huang Rui
2022-03-04  6:07 ` [PATCH V2 4/4] Documentation: amd-pstate: add tracer tool introduction Jinzhou Su
2022-03-04  6:56   ` Huang Rui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220304060724.314582-2-Jinzhou.Su@amd.com \
    --to=jinzhou.su@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=deepak.sharma@amd.com \
    --cc=dsmythies@telus.net \
    --cc=li.meng@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=perry.yuan@amd.com \
    --cc=ray.huang@amd.com \
    --cc=rjw@rjwysocki.net \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=todd.e.brandt@linux.intel.com \
    --cc=viresh.kumar@linaro.org \
    --cc=xiaojian.du@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®