From: Werner Sembach <wse@tuxedocomputers.com>
To: dmitry.torokhov@gmail.com, tiwai@suse.de, mpdesouza@suse.com,
arnd@arndb.de, hdegoede@redhat.com, samuel@cavoj.net,
wse@tuxedocomputers.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/3] input/i8042: Add TUXEDO/Clevo devices to i8042 quirk tables
Date: Tue, 8 Mar 2022 18:05:23 +0100 [thread overview]
Message-ID: <20220308170523.783284-4-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20220308170523.783284-1-wse@tuxedocomputers.com>
A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.
The list is quite massive as neither the TUXEDO nor the Clevo dmi strings
have been very consistent historically. I tried to keep the list as short
as possible without risking on missing an affected device.
This is revision 3. The Clevo N150CU barebone is still removed as it might
have problems with the fix and needs further investigations. The
SchenkerTechnologiesGmbH System-/Board-Vendor string variations are
added. This is now based in the quirk table refactor. This now also
includes the additional noaux flag for the NS7xMU.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
drivers/input/serio/i8042-x86ia64io.h | 638 ++++++++++++++++++++++++++
1 file changed, 638 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index e41b0819277c..d9913e502ebf 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -978,6 +978,218 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* OQO Model 01 */
.matches = {
@@ -1023,6 +1235,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "SchenkerTechnologiesGmbH".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Sharp Actius MM20 */
.matches = {
@@ -1095,6 +1520,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOMUX)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "TUXEDO".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Mivvy M310 */
.matches = {
--
2.25.1
prev parent reply other threads:[~2022-03-08 17:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 17:05 [PATCH v3] Input/i8042: Merge quirk tables and add Clevo devices Werner Sembach
2022-03-08 17:05 ` [PATCH v3 1/3] Input/i8042: Merge quirk tables Werner Sembach
2022-03-09 17:16 ` Hans de Goede
2022-03-21 14:25 ` Werner Sembach
2022-03-21 14:51 ` Hans de Goede
2022-03-21 17:04 ` Werner Sembach
2022-03-08 17:05 ` [PATCH v3 2/3] input/i8042: Add debug output for quirks Werner Sembach
2022-03-08 17:05 ` Werner Sembach [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220308170523.783284-4-wse@tuxedocomputers.com \
--to=wse@tuxedocomputers.com \
--cc=arnd@arndb.de \
--cc=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpdesouza@suse.com \
--cc=samuel@cavoj.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®