From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Oliver Upton <oupton@google.com>, Peter Shier <pshier@google.com>
Subject: [PATCH 05/21] KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like
Date: Fri, 11 Mar 2022 03:27:45 +0000 [thread overview]
Message-ID: <20220311032801.3467418-6-seanjc@google.com> (raw)
In-Reply-To: <20220311032801.3467418-1-seanjc@google.com>
Exclude General Detect #DBs, which have fault-like behavior but also have
a non-zero payload (DR6.BD=1), from nVMX's handling of pending debug
traps. Opportunistically rewrite the comment to better document what is
being checked, i.e. "has a non-zero payload" vs. "has a payload", and to
call out the many caveats surrounding #DBs that KVM dodges one way or
another.
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Fixes: 684c0422da71 ("KVM: nVMX: Handle pending #DB when injecting INIT VM-exit")
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/nested.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 7bdda9ef2828..298a58eaac32 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3832,16 +3832,29 @@ static void nested_vmx_inject_exception_vmexit(struct kvm_vcpu *vcpu,
}
/*
- * Returns true if a debug trap is pending delivery.
+ * Returns true if a debug trap is (likely) pending delivery. Infer the class
+ * of a #DB (trap-like vs. fault-like) from the exception payload (to-be-DR6).
+ * Using the payload is flawed because code breakpoints (fault-like) and data
+ * breakpoints (trap-like) set the same bits in DR6 (breakpoint detected), i.e.
+ * this will return false positives if a to-be-injected code breakpoint #DB is
+ * pending (from KVM's perspective, but not "pending" across an instruction
+ * boundary). ICEBP, a.k.a. INT1, is also not reflected here even though it
+ * too is trap-like.
*
- * In KVM, debug traps bear an exception payload. As such, the class of a #DB
- * exception may be inferred from the presence of an exception payload.
+ * KVM "works" despite these flaws as ICEBP isn't currently supported by the
+ * emulator, Monitor Trap Flag is not marked pending on intercepted #DBs (the
+ * #DB has already happened), and MTF isn't marked pending on code breakpoints
+ * from the emulator (because such #DBs are fault-like and thus don't trigger
+ * actions that fire on instruction retire).
*/
-static inline bool vmx_pending_dbg_trap(struct kvm_vcpu *vcpu)
+static inline unsigned long vmx_get_pending_dbg_trap(struct kvm_vcpu *vcpu)
{
- return vcpu->arch.exception.pending &&
- vcpu->arch.exception.nr == DB_VECTOR &&
- vcpu->arch.exception.payload;
+ if (!vcpu->arch.exception.pending ||
+ vcpu->arch.exception.nr != DB_VECTOR)
+ return 0;
+
+ /* General Detect #DBs are always fault-like. */
+ return vcpu->arch.exception.payload & ~DR6_BD;
}
/*
@@ -3853,9 +3866,10 @@ static inline bool vmx_pending_dbg_trap(struct kvm_vcpu *vcpu)
*/
static void nested_vmx_update_pending_dbg(struct kvm_vcpu *vcpu)
{
- if (vmx_pending_dbg_trap(vcpu))
- vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS,
- vcpu->arch.exception.payload);
+ unsigned long pending_dbg = vmx_get_pending_dbg_trap(vcpu);
+
+ if (pending_dbg)
+ vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS, pending_dbg);
}
static bool nested_vmx_preemption_timer_pending(struct kvm_vcpu *vcpu)
@@ -3912,7 +3926,7 @@ static int vmx_check_nested_events(struct kvm_vcpu *vcpu)
* while delivering the pending exception.
*/
- if (vcpu->arch.exception.pending && !vmx_pending_dbg_trap(vcpu)) {
+ if (vcpu->arch.exception.pending && !vmx_get_pending_dbg_trap(vcpu)) {
if (vmx->nested.nested_run_pending)
return -EBUSY;
if (!nested_vmx_check_exception(vcpu, &exit_qual))
--
2.35.1.723.g4982287a31-goog
next prev parent reply other threads:[~2022-03-11 3:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-11 3:27 [PATCH 00/21] KVM: x86: Event/exception fixes and cleanups Sean Christopherson
2022-03-11 3:27 ` [PATCH 01/21] KVM: x86: Return immediately from x86_emulate_instruction() on code #DB Sean Christopherson
2022-03-11 3:27 ` [PATCH 02/21] KVM: nVMX: Unconditionally purge queued/injected events on nested "exit" Sean Christopherson
2022-03-11 3:27 ` [PATCH 03/21] KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS Sean Christopherson
2022-03-11 3:27 ` [PATCH 04/21] KVM: x86: Don't check for code breakpoints when emulating on exception Sean Christopherson
2022-03-11 3:27 ` Sean Christopherson [this message]
2022-03-11 3:27 ` [PATCH 06/21] KVM: nVMX: Prioritize TSS T-flag #DBs over Monitor Trap Flag Sean Christopherson
2022-03-11 3:27 ` [PATCH 07/21] KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1) Sean Christopherson
2022-03-11 3:27 ` [PATCH 08/21] KVM: x86: Use DR7_GD macro instead of open coding check in emulator Sean Christopherson
2022-03-11 3:27 ` [PATCH 09/21] KVM: nVMX: Ignore SIPI that arrives in L2 when vCPU is not in WFS Sean Christopherson
2022-03-11 3:27 ` [PATCH 10/21] KVM: nVMX: Unconditionally clear mtf_pending on nested VM-Exit Sean Christopherson
2022-03-11 3:27 ` [PATCH 11/21] KVM: VMX: Inject #PF on ENCLS as "emulated" #PF Sean Christopherson
2022-03-11 3:27 ` [PATCH 12/21] KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception Sean Christopherson
2022-03-11 3:27 ` [PATCH 13/21] KVM: x86: Make kvm_queued_exception a properly named, visible struct Sean Christopherson
2022-03-11 3:27 ` [PATCH 14/21] KVM: x86: Formalize blocking of nested pending exceptions Sean Christopherson
2022-03-11 3:27 ` [PATCH 15/21] KVM: x86: Use kvm_queue_exception_e() to queue #DF Sean Christopherson
2022-03-11 3:27 ` [PATCH 16/21] KVM: x86: Hoist nested event checks above event injection logic Sean Christopherson
2022-03-11 3:27 ` [PATCH 17/21] KVM: x86: Evaluate ability to inject SMI/NMI/IRQ after potential VM-Exit Sean Christopherson
2022-03-11 3:27 ` [PATCH 18/21] KVM: x86: Morph pending exceptions to pending VM-Exits at queue time Sean Christopherson
2022-03-11 3:27 ` [PATCH 19/21] KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior Sean Christopherson
2022-03-11 3:28 ` [PATCH 20/21] KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes Sean Christopherson
2022-03-11 3:28 ` [PATCH 21/21] KVM: selftests: Add an x86-only test to verify nested exception queueing Sean Christopherson
2022-03-11 16:30 ` [PATCH 00/21] KVM: x86: Event/exception fixes and cleanups Maciej S. Szmigiero
2022-03-13 9:22 ` Maxim Levitsky
2022-03-24 21:31 ` Sean Christopherson
2022-03-25 21:25 ` Maciej S. Szmigiero
2022-03-25 23:02 ` Sean Christopherson
2022-03-26 0:21 ` Maciej S. Szmigiero
2022-03-27 15:06 ` Maxim Levitsky
2022-03-28 17:50 ` Sean Christopherson
2022-03-29 10:45 ` Maxim Levitsky
2022-03-29 15:43 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220311032801.3467418-6-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oupton@google.com \
--cc=pbonzini@redhat.com \
--cc=pshier@google.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®