From: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>
Cc: <hsinyi@chromium.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-watchdog@vger.kernel.org>,
Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Subject: [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
Date: Fri, 11 Mar 2022 21:07:32 +0800 [thread overview]
Message-ID: <20220311130732.22706-5-allen-kh.cheng@mediatek.com> (raw)
In-Reply-To: <20220311130732.22706-1-allen-kh.cheng@mediatek.com>
From: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Add basic chip support for Mediatek MT8186.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 24 ++
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 356 ++++++++++++++++++++
3 files changed, 381 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8c1e18032f9f..d32fdcf9afc6 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -37,5 +37,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
new file mode 100644
index 000000000000..eb23d1f19f87
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+
+/ {
+ model = "MediaTek MT8186 evaluation board";
+ compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
new file mode 100644
index 000000000000..aa45c75b18c7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Allen-KH Cheng <allenn-kh.cheng@mediatek.com>
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ compatible = "mediatek,mt8186";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clk13m: oscillator0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13000000>;
+ clock-output-names = "clk13m";
+ };
+
+ clk26m: oscillator1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0000>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0100>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0200>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0300>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0400>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55", "arm,armv8";
+ reg = <0x0500>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a75", "arm,armv8";
+ reg = <0x0600>;
+ enable-method = "psci";
+ clock-frequency = <2050000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a75", "arm,armv8";
+ reg = <0x0700>;
+ enable-method = "psci";
+ clock-frequency = <2050000000>;
+ cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+ next-level-cache = <&l2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+
+ core5 {
+ cpu = <&cpu5>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu6>;
+ };
+
+ core1 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ cpuoff_l: cpu-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <100>;
+ min-residency-us = <1600>;
+ };
+
+ cpuoff_b: cpu-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <100>;
+ min-residency-us = <1400>;
+ };
+
+ clusteroff_l: cluster-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010001>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <250>;
+ min-residency-us = <2100>;
+ };
+
+ clusteroff_b: cluster-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010001>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <250>;
+ min-residency-us = <1900>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>, // distributor
+ <0 0x0c040000 0 0x200000>; // redistributor
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8186-wdt",
+ "mediatek,mt6589-wdt";
+ mediatek,disable-extrst;
+ reg = <0 0x10007000 0 0x1000>;
+ #reset-cells = <1>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8186-timer",
+ "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk13m>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8186-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8186-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11018000 {
+ compatible = "mediatek,mt8186-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11018000 0 0x1000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8186-mmc",
+ "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11cd0000 0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>,
+ <&clk26m>;
+ clock-names = "source", "hclk", "source_cg", "ahb_clk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8186-mmc",
+ "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c90000 0 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>, <&clk26m>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ u3phy0: t-phy@11c80000 {
+ compatible = "mediatek,mt8186-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11c80000 0x1000>;
+
+ u2port1: usb2-phy1@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+
+ u3port1: usb3-phy1@700 {
+ reg = <0x700 0x900>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ u3phy1: t-phy@11ca0000 {
+ compatible = "mediatek,mt8186-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11ca0000 0x1000>;
+
+ u2port0: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ mediatek,discth = <0x8>;
+ };
+ };
+ };
+};
--
2.18.0
next prev parent reply other threads:[~2022-03-11 13:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-11 13:07 [PATCH v4 0/4] Add basic node support for Mediatek MT8186 SoC Allen-KH Cheng
2022-03-11 13:07 ` [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186 Allen-KH Cheng
2022-03-11 15:50 ` Rob Herring
2022-03-30 11:49 ` Daniel Lezcano
2022-05-27 8:36 ` [tip: timers/core] " tip-bot2 for Allen-KH Cheng
2022-03-11 13:07 ` [PATCH v4 2/4] dt-bindings: watchdog: " Allen-KH Cheng
2022-03-11 15:50 ` Rob Herring
2022-03-14 1:46 ` Rex-BC Chen
2022-03-11 13:07 ` [PATCH v4 3/4] dt-bindings: arm: " Allen-KH Cheng
2022-03-11 15:51 ` Rob Herring
2022-03-11 13:07 ` Allen-KH Cheng [this message]
2022-03-29 14:56 ` [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile Matthias Brugger
[not found] ` <8c27fbbdf109b53cff5472e89da83741bee4b202.camel@mediatek.com>
2022-04-26 10:28 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220311130732.22706-5-allen-kh.cheng@mediatek.com \
--to=allen-kh.cheng@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@chromium.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®