From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
kernel@collabora.com,
"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
"Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH v1 04/10] arm64: dts: mediatek: asurada: Enable and configure I2C and SPI busses
Date: Wed, 16 Mar 2022 11:13:21 -0400 [thread overview]
Message-ID: <20220316151327.564214-5-nfraprado@collabora.com> (raw)
In-Reply-To: <20220316151327.564214-1-nfraprado@collabora.com>
The Asurada platform has five I2C controllers and two SPI controllers
that are used. In preparation for enabling the devices connected to
these controllers, enable and configure their busses.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../boot/dts/mediatek/mt8192-asurada.dtsi | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 5cb7580a13cf..3c5b1e475cf6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -85,6 +85,47 @@ ppvar_sys: ppvar-sys {
};
};
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ clock-stretch-ns = <12600>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+};
+
&pio {
/* 220 lines */
gpio-line-names = "I2S_DP_LRCK",
@@ -311,6 +352,95 @@ &pio {
"AUD_DAT_MOSI1",
"AUD_DAT_MISO0",
"AUD_DAT_MISO1";
+
+ i2c0_pins: i2c0-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+ <PINMUX_GPIO205__FUNC_SDA0>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c1_pins: i2c1-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+ <PINMUX_GPIO119__FUNC_SDA1>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c2_pins: i2c2-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+ <PINMUX_GPIO142__FUNC_SDA2>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <0>;
+ };
+ };
+
+ i2c3_pins: i2c3-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+ <PINMUX_GPIO161__FUNC_SDA3>;
+ bias-disable;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c7_pins: i2c7-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+ <PINMUX_GPIO125__FUNC_SDA7>;
+ bias-disable;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ spi1_pins: spi1-default-pins {
+ pins-cs-mosi-clk {
+ pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+ <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+ <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+ bias-disable;
+ };
+
+ pins-miso {
+ pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+ bias-pull-down;
+ };
+ };
+
+ spi5_pins: spi5-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+ <PINMUX_GPIO37__FUNC_GPIO37>,
+ <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+ <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+ bias-disable;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
+
+&spi5 {
+ status = "okay";
+
+ cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
};
&uart0 {
--
2.35.1
next prev parent reply other threads:[~2022-03-16 15:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-16 15:13 [PATCH v1 00/10] Introduce support for MediaTek MT8192 Google Chromebooks Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 01/10] arm64: dts: mediatek: Introduce MT8192-based Asurada board family Nícolas F. R. A. Prado
2022-04-27 8:43 ` Chen-Yu Tsai
2022-04-27 13:54 ` Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 02/10] arm64: dts: mediatek: asurada: Document GPIO names Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 03/10] arm64: dts: mediatek: asurada: Add system-wide power supplies Nícolas F. R. A. Prado
2022-03-16 15:13 ` Nícolas F. R. A. Prado [this message]
2022-03-16 15:13 ` [PATCH v1 05/10] arm64: dts: mediatek: asurada: Add ChromeOS EC Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 06/10] arm64: dts: mediatek: asurada: Add keyboard mapping for the top row Nícolas F. R. A. Prado
2022-03-16 16:42 ` Maya Matuszczyk
2022-03-17 14:40 ` Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 07/10] arm64: dts: mediatek: asurada: Add Cr50 TPM Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 08/10] arm64: dts: mediatek: asurada: Add Elan eKTH3000 I2C trackpad Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 09/10] arm64: dts: mediatek: asurada: Add I2C touchscreen Nícolas F. R. A. Prado
2022-03-16 15:13 ` [PATCH v1 10/10] arm64: dts: mediatek: spherion: Add keyboard backlight Nícolas F. R. A. Prado
2022-03-18 11:41 ` [PATCH v1 00/10] Introduce support for MediaTek MT8192 Google Chromebooks AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220316151327.564214-5-nfraprado@collabora.com \
--to=nfraprado@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®