From: Stephen Kitt <steve@sk2.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Nuno Sá" <nuno.sa@analog.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>
Cc: Wolfram Sang <wsa@kernel.org>,
linux-kernel@vger.kernel.org, Stephen Kitt <steve@sk2.org>
Subject: [PATCH] ASoC: ad1*, ada*, ssm*: use i2c_match_id and simple i2c probe
Date: Fri, 25 Mar 2022 17:54:52 +0100 [thread overview]
Message-ID: <20220325165452.1212975-1-steve@sk2.org> (raw)
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
---
sound/soc/codecs/ad193x-i2c.c | 6 +++---
sound/soc/codecs/adau1761-i2c.c | 8 +++++---
sound/soc/codecs/adau1781-i2c.c | 8 +++++---
sound/soc/codecs/adau1977-i2c.c | 8 +++++---
sound/soc/codecs/ssm2602-i2c.c | 8 +++++---
5 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/sound/soc/codecs/ad193x-i2c.c b/sound/soc/codecs/ad193x-i2c.c
index 3d509a65e4ca..4cb8d87f9011 100644
--- a/sound/soc/codecs/ad193x-i2c.c
+++ b/sound/soc/codecs/ad193x-i2c.c
@@ -20,10 +20,10 @@ static const struct i2c_device_id ad193x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, ad193x_id);
-static int ad193x_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ad193x_i2c_probe(struct i2c_client *client)
{
struct regmap_config config;
+ const struct i2c_device_id *id = i2c_match_id(ad193x_id, client);
config = ad193x_regmap_config;
config.val_bits = 8;
@@ -38,7 +38,7 @@ static struct i2c_driver ad193x_i2c_driver = {
.driver = {
.name = "ad193x",
},
- .probe = ad193x_i2c_probe,
+ .probe_new = ad193x_i2c_probe,
.id_table = ad193x_id,
};
module_i2c_driver(ad193x_i2c_driver);
diff --git a/sound/soc/codecs/adau1761-i2c.c b/sound/soc/codecs/adau1761-i2c.c
index c8fce37e5cfa..0683caf86aea 100644
--- a/sound/soc/codecs/adau1761-i2c.c
+++ b/sound/soc/codecs/adau1761-i2c.c
@@ -14,10 +14,12 @@
#include "adau1761.h"
-static int adau1761_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id adau1761_i2c_ids[];
+
+static int adau1761_i2c_probe(struct i2c_client *client)
{
struct regmap_config config;
+ const struct i2c_device_id *id = i2c_match_id(adau1761_i2c_ids, client);
config = adau1761_regmap_config;
config.val_bits = 8;
@@ -59,7 +61,7 @@ static struct i2c_driver adau1761_i2c_driver = {
.name = "adau1761",
.of_match_table = of_match_ptr(adau1761_i2c_dt_ids),
},
- .probe = adau1761_i2c_probe,
+ .probe_new = adau1761_i2c_probe,
.remove = adau1761_i2c_remove,
.id_table = adau1761_i2c_ids,
};
diff --git a/sound/soc/codecs/adau1781-i2c.c b/sound/soc/codecs/adau1781-i2c.c
index 1c476429ad99..e046de0ebcc7 100644
--- a/sound/soc/codecs/adau1781-i2c.c
+++ b/sound/soc/codecs/adau1781-i2c.c
@@ -14,10 +14,12 @@
#include "adau1781.h"
-static int adau1781_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id adau1781_i2c_ids[];
+
+static int adau1781_i2c_probe(struct i2c_client *client)
{
struct regmap_config config;
+ const struct i2c_device_id *id = i2c_match_id(adau1781_i2c_ids, client);
config = adau1781_regmap_config;
config.val_bits = 8;
@@ -55,7 +57,7 @@ static struct i2c_driver adau1781_i2c_driver = {
.name = "adau1781",
.of_match_table = of_match_ptr(adau1781_i2c_dt_ids),
},
- .probe = adau1781_i2c_probe,
+ .probe_new = adau1781_i2c_probe,
.remove = adau1781_i2c_remove,
.id_table = adau1781_i2c_ids,
};
diff --git a/sound/soc/codecs/adau1977-i2c.c b/sound/soc/codecs/adau1977-i2c.c
index 82a49c85d536..9f137a0634d5 100644
--- a/sound/soc/codecs/adau1977-i2c.c
+++ b/sound/soc/codecs/adau1977-i2c.c
@@ -14,10 +14,12 @@
#include "adau1977.h"
-static int adau1977_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id adau1977_i2c_ids[];
+
+static int adau1977_i2c_probe(struct i2c_client *client)
{
struct regmap_config config;
+ const struct i2c_device_id *id = i2c_match_id(adau1977_i2c_ids, client);
config = adau1977_regmap_config;
config.val_bits = 8;
@@ -40,7 +42,7 @@ static struct i2c_driver adau1977_i2c_driver = {
.driver = {
.name = "adau1977",
},
- .probe = adau1977_i2c_probe,
+ .probe_new = adau1977_i2c_probe,
.id_table = adau1977_i2c_ids,
};
module_i2c_driver(adau1977_i2c_driver);
diff --git a/sound/soc/codecs/ssm2602-i2c.c b/sound/soc/codecs/ssm2602-i2c.c
index afab81383d3a..3c85772901f5 100644
--- a/sound/soc/codecs/ssm2602-i2c.c
+++ b/sound/soc/codecs/ssm2602-i2c.c
@@ -13,15 +13,17 @@
#include "ssm2602.h"
+static const struct i2c_device_id ssm2602_i2c_id[];
+
/*
* ssm2602 2 wire address is determined by GPIO5
* state during powerup.
* low = 0x1a
* high = 0x1b
*/
-static int ssm2602_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ssm2602_i2c_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_match_id(ssm2602_i2c_id, client);
return ssm2602_probe(&client->dev, id->driver_data,
devm_regmap_init_i2c(client, &ssm2602_regmap_config));
}
@@ -47,7 +49,7 @@ static struct i2c_driver ssm2602_i2c_driver = {
.name = "ssm2602",
.of_match_table = ssm2602_of_match,
},
- .probe = ssm2602_i2c_probe,
+ .probe_new = ssm2602_i2c_probe,
.id_table = ssm2602_i2c_id,
};
module_i2c_driver(ssm2602_i2c_driver);
--
2.27.0
next reply other threads:[~2022-03-25 17:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 16:54 Stephen Kitt [this message]
2022-03-28 7:48 ` Sa, Nuno
2022-03-30 9:38 ` Wolfram Sang
2022-04-05 9:31 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220325165452.1212975-1-steve@sk2.org \
--to=steve@sk2.org \
--cc=broonie@kernel.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®