[PATCH] ASoC: wm8731: use simple i2c probe function

[Stephen Kitt <steve@sk2.org>]

The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.

This avoids scanning the identifier tables during probes.

Signed-off-by: Stephen Kitt <steve@sk2.org>
---
 sound/soc/codecs/wm8731.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 5d4949c2ec9b..c430f169eb24 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -723,8 +723,7 @@ static struct spi_driver wm8731_spi_driver = {
 #endif /* CONFIG_SPI_MASTER */
 
 #if IS_ENABLED(CONFIG_I2C)
-static int wm8731_i2c_probe(struct i2c_client *i2c,
-			    const struct i2c_device_id *id)
+static int wm8731_i2c_probe(struct i2c_client *i2c)
 {
 	struct wm8731_priv *wm8731;
 	int ret;
@@ -788,7 +787,7 @@ static struct i2c_driver wm8731_i2c_driver = {
 		.name = "wm8731",
 		.of_match_table = wm8731_of_match,
 	},
-	.probe =    wm8731_i2c_probe,
+	.probe_new = wm8731_i2c_probe,
 	.id_table = wm8731_i2c_id,
 };
 #endif
-- 
2.27.0