From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Stefano Stabellini <sstabellini@kernel.org>
Subject: [PATCH] xen/balloon: don't use PV mode extra memory for zone device allocations
Date: Thu, 7 Apr 2022 11:38:57 +0200 [thread overview]
Message-ID: <20220407093857.1485-1-jgross@suse.com> (raw)
When running as a Xen PV guest use the extra memory (memory which isn't
allocated for the guest at boot time) only for ballooning purposes and
not for zone device allocations. This will remove some code without any
lack of functionality.
While at it move some code to get rid of another #ifdef.
Remove a comment which is stale since some time now.
Signed-off-by: Juergen Gross <jgross@suse.com>
---
drivers/xen/balloon.c | 54 ++++++++++++++-------------------
drivers/xen/unpopulated-alloc.c | 33 --------------------
2 files changed, 23 insertions(+), 64 deletions(-)
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index dfe26fa17e95..617a7f4f07a8 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -689,29 +689,34 @@ void xen_free_ballooned_pages(unsigned int nr_pages, struct page **pages)
}
EXPORT_SYMBOL(xen_free_ballooned_pages);
-#if defined(CONFIG_XEN_PV) && !defined(CONFIG_XEN_UNPOPULATED_ALLOC)
-static void __init balloon_add_region(unsigned long start_pfn,
- unsigned long pages)
+static void __init balloon_add_regions(void)
{
+#if defined(CONFIG_XEN_PV)
+ unsigned long start_pfn, pages;
unsigned long pfn, extra_pfn_end;
+ unsigned int i;
- /*
- * If the amount of usable memory has been limited (e.g., with
- * the 'mem' command line parameter), don't add pages beyond
- * this limit.
- */
- extra_pfn_end = min(max_pfn, start_pfn + pages);
+ for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
+ pages = xen_extra_mem[i].n_pfns;
+ if (!pages)
+ continue;
- for (pfn = start_pfn; pfn < extra_pfn_end; pfn++) {
- /* totalram_pages and totalhigh_pages do not
- include the boot-time balloon extension, so
- don't subtract from it. */
- balloon_append(pfn_to_page(pfn));
- }
+ start_pfn = xen_extra_mem[i].start_pfn;
- balloon_stats.total_pages += extra_pfn_end - start_pfn;
-}
+ /*
+ * If the amount of usable memory has been limited (e.g., with
+ * the 'mem' command line parameter), don't add pages beyond
+ * this limit.
+ */
+ extra_pfn_end = min(max_pfn, start_pfn + pages);
+
+ for (pfn = start_pfn; pfn < extra_pfn_end; pfn++)
+ balloon_append(pfn_to_page(pfn));
+
+ balloon_stats.total_pages += extra_pfn_end - start_pfn;
+ }
#endif
+}
static int __init balloon_init(void)
{
@@ -745,20 +750,7 @@ static int __init balloon_init(void)
register_sysctl_table(xen_root);
#endif
-#if defined(CONFIG_XEN_PV) && !defined(CONFIG_XEN_UNPOPULATED_ALLOC)
- {
- int i;
-
- /*
- * Initialize the balloon with pages from the extra memory
- * regions (see arch/x86/xen/setup.c).
- */
- for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++)
- if (xen_extra_mem[i].n_pfns)
- balloon_add_region(xen_extra_mem[i].start_pfn,
- xen_extra_mem[i].n_pfns);
- }
-#endif
+ balloon_add_regions();
task = kthread_run(balloon_thread, NULL, "xen-balloon");
if (IS_ERR(task)) {
diff --git a/drivers/xen/unpopulated-alloc.c b/drivers/xen/unpopulated-alloc.c
index a8b41057c382..a39f2d36dd9c 100644
--- a/drivers/xen/unpopulated-alloc.c
+++ b/drivers/xen/unpopulated-alloc.c
@@ -230,39 +230,6 @@ void xen_free_unpopulated_pages(unsigned int nr_pages, struct page **pages)
}
EXPORT_SYMBOL(xen_free_unpopulated_pages);
-#ifdef CONFIG_XEN_PV
-static int __init init(void)
-{
- unsigned int i;
-
- if (!xen_domain())
- return -ENODEV;
-
- if (!xen_pv_domain())
- return 0;
-
- /*
- * Initialize with pages from the extra memory regions (see
- * arch/x86/xen/setup.c).
- */
- for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
- unsigned int j;
-
- for (j = 0; j < xen_extra_mem[i].n_pfns; j++) {
- struct page *pg =
- pfn_to_page(xen_extra_mem[i].start_pfn + j);
-
- pg->zone_device_data = page_list;
- page_list = pg;
- list_count++;
- }
- }
-
- return 0;
-}
-subsys_initcall(init);
-#endif
-
static int __init unpopulated_init(void)
{
int ret;
--
2.34.1
next reply other threads:[~2022-04-07 9:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 9:38 Juergen Gross [this message]
2022-04-07 20:04 ` Boris Ostrovsky
2022-04-09 21:21 ` Boris Ostrovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220407093857.1485-1-jgross@suse.com \
--to=jgross@suse.com \
--cc=boris.ostrovsky@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®