From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 31/31] KVM: selftests: hyperv_svm_test: Add Direct TLB flush test
Date: Thu, 7 Apr 2022 17:56:45 +0200 [thread overview]
Message-ID: <20220407155645.940890-32-vkuznets@redhat.com> (raw)
In-Reply-To: <20220407155645.940890-1-vkuznets@redhat.com>
Enable Hyper-V Direct TLB flush and check that Hyper-V TLB flush
hypercalls from L2 don't exit to L1 unless 'TlbLockCount' is set in the
Partition assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
.../selftests/kvm/x86_64/hyperv_svm_test.c | 60 +++++++++++++++++--
1 file changed, 56 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
index 21f5ca9197da..e2849e58582f 100644
--- a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
+++ b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
@@ -42,11 +42,24 @@ struct hv_enlightenments {
*/
#define VMCB_HV_NESTED_ENLIGHTENMENTS (1U << 31)
+#define HV_SVM_EXITCODE_ENL 0xF0000000
+#define HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH (1)
+
static inline void vmmcall(void)
{
__asm__ __volatile__("vmmcall");
}
+static inline void hypercall(u64 control, vm_vaddr_t arg1, vm_vaddr_t arg2)
+{
+ asm volatile("mov %3, %%r8\n"
+ "vmmcall"
+ : "+c" (control), "+d" (arg1)
+ : "r" (arg2)
+ : "cc", "memory", "rax", "rbx", "r8", "r9", "r10",
+ "r11", "r12", "r13", "r14", "r15");
+}
+
void l2_guest_code(void)
{
GUEST_SYNC(3);
@@ -62,11 +75,21 @@ void l2_guest_code(void)
GUEST_SYNC(5);
+ /* Direct TLB flush tests */
+ hypercall(HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE | HV_HYPERCALL_FAST_BIT, 0x0,
+ HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES | HV_FLUSH_ALL_PROCESSORS);
+ rdmsr(MSR_FS_BASE);
+ hypercall(HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE | HV_HYPERCALL_FAST_BIT, 0x0,
+ HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES | HV_FLUSH_ALL_PROCESSORS);
+ /* Make sure we're not issuing Hyper-V TLB flush call again */
+ __asm__ __volatile__ ("mov $0xdeadbeef, %rcx");
+
/* Done, exit to L1 and never come back. */
vmmcall();
}
-static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
+static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm,
+ vm_vaddr_t pgs_gpa)
{
unsigned long l2_guest_stack[L2_GUEST_STACK_SIZE];
struct vmcb *vmcb = svm->vmcb;
@@ -75,13 +98,23 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
GUEST_SYNC(1);
- wrmsr(HV_X64_MSR_GUEST_OS_ID, (u64)0x8100 << 48);
+ wrmsr(HV_X64_MSR_GUEST_OS_ID, HYPERV_LINUX_OS_ID);
+ wrmsr(HV_X64_MSR_HYPERCALL, pgs_gpa);
+ enable_vp_assist(svm->vp_assist_gpa, svm->vp_assist);
GUEST_ASSERT(svm->vmcb_gpa);
/* Prepare for L2 execution. */
generic_svm_setup(svm, l2_guest_code,
&l2_guest_stack[L2_GUEST_STACK_SIZE]);
+ /* Direct TLB flush setup */
+ hve->partition_assist_page = svm->partition_assist_gpa;
+ hve->hv_enlightenments_control.nested_flush_hypercall = 1;
+ hve->hv_vm_id = 1;
+ hve->hv_vp_id = 1;
+ current_vp_assist->nested_control.features.directhypercall = 1;
+ *(u32 *)(svm->partition_assist) = 0;
+
GUEST_SYNC(2);
run_guest(vmcb, svm->vmcb_gpa);
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_VMMCALL);
@@ -116,6 +149,20 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_MSR);
vmcb->save.rip += 2; /* rdmsr */
+
+ /*
+ * Direct TLB flush test. First VMCALL should be handled directly by L0,
+ * no VMCALL exit expested.
+ */
+ run_guest(vmcb, svm->vmcb_gpa);
+ GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_MSR);
+ vmcb->save.rip += 2; /* rdmsr */
+ /* Enable synthetic vmexit */
+ *(u32 *)(svm->partition_assist) = 1;
+ run_guest(vmcb, svm->vmcb_gpa);
+ GUEST_ASSERT(vmcb->control.exit_code == HV_SVM_EXITCODE_ENL);
+ GUEST_ASSERT(vmcb->control.exit_info_1 == HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH);
+
run_guest(vmcb, svm->vmcb_gpa);
GUEST_ASSERT(vmcb->control.exit_code == SVM_EXIT_VMMCALL);
GUEST_SYNC(6);
@@ -126,7 +173,7 @@ static void __attribute__((__flatten__)) guest_code(struct svm_test_data *svm)
int main(int argc, char *argv[])
{
vm_vaddr_t nested_gva = 0;
-
+ vm_vaddr_t hcall_page;
struct kvm_vm *vm;
struct kvm_run *run;
struct ucall uc;
@@ -141,7 +188,12 @@ int main(int argc, char *argv[])
vcpu_set_hv_cpuid(vm, VCPU_ID);
run = vcpu_state(vm, VCPU_ID);
vcpu_alloc_svm(vm, &nested_gva);
- vcpu_args_set(vm, VCPU_ID, 1, nested_gva);
+
+ hcall_page = vm_vaddr_alloc_pages(vm, 1);
+ memset(addr_gva2hva(vm, hcall_page), 0x0, getpagesize());
+
+ vcpu_args_set(vm, VCPU_ID, 2, nested_gva, addr_gva2gpa(vm, hcall_page));
+ vcpu_set_msr(vm, VCPU_ID, HV_X64_MSR_VP_INDEX, VCPU_ID);
for (stage = 1;; stage++) {
_vcpu_run(vm, VCPU_ID);
--
2.35.1
prev parent reply other threads:[~2022-04-07 15:59 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 15:56 [PATCH v2 00/31] KVM: x86: hyper-v: Fine-grained TLB flush + Direct TLB flush feature Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 01/31] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-04-07 18:02 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 02/31] KVM: x86: hyper-v: Introduce TLB flush ring Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 03/31] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-04-07 17:33 ` Sean Christopherson
2022-04-07 17:47 ` Sean Christopherson
2022-04-11 11:15 ` Vitaly Kuznetsov
2022-04-07 17:44 ` Sean Christopherson
2022-04-11 11:31 ` Vitaly Kuznetsov
2022-04-11 20:37 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 04/31] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 05/31] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 06/31] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-04-07 17:48 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 07/31] KVM: x86: hyper-v: Create a separate ring for Direct TLB flush Vitaly Kuznetsov
2022-04-07 17:57 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 08/31] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 09/31] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 10/31] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 11/31] KVM: x86: Introduce .post_hv_direct_flush() nested hook Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 12/31] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-04-07 18:07 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 13/31] KVM: x86: hyper-v: Direct TLB flush Vitaly Kuznetsov
2022-04-07 18:27 ` Sean Christopherson
2022-04-14 12:24 ` Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 14/31] KVM: x86: hyper-v: Introduce fast kvm_hv_direct_tlb_flush_exposed() check Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 15/31] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 16/31] KVM: nVMX: hyper-v: Direct TLB flush Vitaly Kuznetsov
2022-04-07 18:47 ` Sean Christopherson
2022-04-11 11:19 ` Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 17/31] KVM: x86: KVM_REQ_TLB_FLUSH_CURRENT is a superset of KVM_REQ_HV_TLB_FLUSH too Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 18/31] KVM: nSVM: hyper-v: Direct TLB flush Vitaly Kuznetsov
2022-04-07 18:50 ` Sean Christopherson
2022-04-07 15:56 ` [PATCH v2 19/31] KVM: x86: Expose Hyper-V Direct TLB flush feature Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 20/31] KVM: selftests: add hyperv_svm_test to .gitignore Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 21/31] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 22/31] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 23/31] KVM: selftests: Make it possible to replace PTEs with __virt_pg_map() Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 24/31] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 25/31] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 26/31] KVM: selftests: nVMX: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 27/31] KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist pages Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 28/31] KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 29/31] KVM: selftests: evmcs_test: Direct TLB flush test Vitaly Kuznetsov
2022-04-07 15:56 ` [PATCH v2 30/31] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-04-07 15:56 ` Vitaly Kuznetsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220407155645.940890-32-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®