From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
<mkubecek@suse.cz>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lipeng321@huawei.com>, <huangguangbin2@huawei.com>,
<chenhao288@hisilicon.com>, <wangjie125@huawei.com>
Subject: [PATCH net-next 1/3] net: ethtool: extend ringparam set/get APIs for tx_push
Date: Fri, 8 Apr 2022 15:12:43 +0800 [thread overview]
Message-ID: <20220408071245.40554-2-huangguangbin2@huawei.com> (raw)
In-Reply-To: <20220408071245.40554-1-huangguangbin2@huawei.com>
From: Jie Wang <wangjie125@huawei.com>
Currently tx push is a standard driver feature which controls use of a fast
path descriptor push. So this patch extends the ringparam APIs and data
structures to support set/get tx push by ethtool -G/g.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
Documentation/networking/ethtool-netlink.rst | 8 ++++++++
include/linux/ethtool.h | 3 +++
include/uapi/linux/ethtool_netlink.h | 1 +
net/ethtool/netlink.h | 2 +-
net/ethtool/rings.c | 18 ++++++++++++++++--
5 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 24d9be69065d..fcd4fdf96c8e 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -862,6 +862,7 @@ Kernel response contents:
``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split
``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
+ ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode
==================================== ====== ===========================
``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with
@@ -871,6 +872,12 @@ separate buffers. The device configuration must make it possible to receive
full memory pages of data, for example because MTU is high enough or through
HW-GRO.
+``ETHTOOL_A_RINGS_TX_PUSH`` flag is used to choose the ordinary path or the fast
+path to send packets. In ordinary path, driver fills BDs to DDR memory and
+notifies NIC hardware. In fast path, driver pushes BDs to the device memory
+directly and thus reducing the sending latencies. Setting tx push attribute "on"
+will enable tx push mode and send packets in fast path if packet size matches.
+For those not supported hardwares, this attributes is "off" by default settings.
RINGS_SET
=========
@@ -887,6 +894,7 @@ Request contents:
``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
+ ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode
==================================== ====== ===========================
Kernel checks that requested ring sizes do not exceed limits reported by
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 4af58459a1e7..ede4f9154cd2 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -71,11 +71,13 @@ enum {
* struct kernel_ethtool_ringparam - RX/TX ring configuration
* @rx_buf_len: Current length of buffers on the rx ring.
* @tcp_data_split: Scatter packet headers and data to separate buffers
+ * @tx_push: The flag of tx push mode
* @cqe_size: Size of TX/RX completion queue event
*/
struct kernel_ethtool_ringparam {
u32 rx_buf_len;
u8 tcp_data_split;
+ u8 tx_push;
u32 cqe_size;
};
@@ -87,6 +89,7 @@ struct kernel_ethtool_ringparam {
enum ethtool_supported_ring_param {
ETHTOOL_RING_USE_RX_BUF_LEN = BIT(0),
ETHTOOL_RING_USE_CQE_SIZE = BIT(1),
+ ETHTOOL_RING_USE_TX_PUSH = BIT(2),
};
#define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 979850221b8d..d2fb4f7be61b 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -338,6 +338,7 @@ enum {
ETHTOOL_A_RINGS_RX_BUF_LEN, /* u32 */
ETHTOOL_A_RINGS_TCP_DATA_SPLIT, /* u8 */
ETHTOOL_A_RINGS_CQE_SIZE, /* u32 */
+ ETHTOOL_A_RINGS_TX_PUSH, /* u8 */
/* add new constants above here */
__ETHTOOL_A_RINGS_CNT,
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 29d01662a48b..7919ddb2371c 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -363,7 +363,7 @@ extern const struct nla_policy ethnl_features_set_policy[ETHTOOL_A_FEATURES_WANT
extern const struct nla_policy ethnl_privflags_get_policy[ETHTOOL_A_PRIVFLAGS_HEADER + 1];
extern const struct nla_policy ethnl_privflags_set_policy[ETHTOOL_A_PRIVFLAGS_FLAGS + 1];
extern const struct nla_policy ethnl_rings_get_policy[ETHTOOL_A_RINGS_HEADER + 1];
-extern const struct nla_policy ethnl_rings_set_policy[ETHTOOL_A_RINGS_CQE_SIZE + 1];
+extern const struct nla_policy ethnl_rings_set_policy[ETHTOOL_A_RINGS_TX_PUSH + 1];
extern const struct nla_policy ethnl_channels_get_policy[ETHTOOL_A_CHANNELS_HEADER + 1];
extern const struct nla_policy ethnl_channels_set_policy[ETHTOOL_A_CHANNELS_COMBINED_COUNT + 1];
extern const struct nla_policy ethnl_coalesce_get_policy[ETHTOOL_A_COALESCE_HEADER + 1];
diff --git a/net/ethtool/rings.c b/net/ethtool/rings.c
index 9f33c9689b56..9ed60c507d97 100644
--- a/net/ethtool/rings.c
+++ b/net/ethtool/rings.c
@@ -55,7 +55,8 @@ static int rings_reply_size(const struct ethnl_req_info *req_base,
nla_total_size(sizeof(u32)) + /* _RINGS_TX */
nla_total_size(sizeof(u32)) + /* _RINGS_RX_BUF_LEN */
nla_total_size(sizeof(u8)) + /* _RINGS_TCP_DATA_SPLIT */
- nla_total_size(sizeof(u32)); /* _RINGS_CQE_SIZE */
+ nla_total_size(sizeof(u32) + /* _RINGS_CQE_SIZE */
+ nla_total_size(sizeof(u8))); /* _RINGS_TX_PUSH */
}
static int rings_fill_reply(struct sk_buff *skb,
@@ -94,7 +95,8 @@ static int rings_fill_reply(struct sk_buff *skb,
(nla_put_u8(skb, ETHTOOL_A_RINGS_TCP_DATA_SPLIT,
kr->tcp_data_split))) ||
(kr->cqe_size &&
- (nla_put_u32(skb, ETHTOOL_A_RINGS_CQE_SIZE, kr->cqe_size))))
+ (nla_put_u32(skb, ETHTOOL_A_RINGS_CQE_SIZE, kr->cqe_size))) ||
+ nla_put_u8(skb, ETHTOOL_A_RINGS_TX_PUSH, !!kr->tx_push))
return -EMSGSIZE;
return 0;
@@ -123,6 +125,7 @@ const struct nla_policy ethnl_rings_set_policy[] = {
[ETHTOOL_A_RINGS_TX] = { .type = NLA_U32 },
[ETHTOOL_A_RINGS_RX_BUF_LEN] = NLA_POLICY_MIN(NLA_U32, 1),
[ETHTOOL_A_RINGS_CQE_SIZE] = NLA_POLICY_MIN(NLA_U32, 1),
+ [ETHTOOL_A_RINGS_TX_PUSH] = NLA_POLICY_MAX(NLA_U8, 1),
};
int ethnl_set_rings(struct sk_buff *skb, struct genl_info *info)
@@ -149,6 +152,15 @@ int ethnl_set_rings(struct sk_buff *skb, struct genl_info *info)
if (!ops->get_ringparam || !ops->set_ringparam)
goto out_dev;
+ if (tb[ETHTOOL_A_RINGS_TX_PUSH] &&
+ !(ops->supported_ring_params & ETHTOOL_RING_USE_TX_PUSH)) {
+ ret = -EOPNOTSUPP;
+ NL_SET_ERR_MSG_ATTR(info->extack,
+ tb[ETHTOOL_A_RINGS_TX_PUSH],
+ "setting tx push not supported");
+ goto out_dev;
+ }
+
rtnl_lock();
ret = ethnl_ops_begin(dev);
if (ret < 0)
@@ -165,6 +177,8 @@ int ethnl_set_rings(struct sk_buff *skb, struct genl_info *info)
tb[ETHTOOL_A_RINGS_RX_BUF_LEN], &mod);
ethnl_update_u32(&kernel_ringparam.cqe_size,
tb[ETHTOOL_A_RINGS_CQE_SIZE], &mod);
+ ethnl_update_u8(&kernel_ringparam.tx_push,
+ tb[ETHTOOL_A_RINGS_TX_PUSH], &mod);
ret = 0;
if (!mod)
goto out_ops;
--
2.33.0
next prev parent reply other threads:[~2022-04-08 7:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 7:12 [PATCH net-next 0/3] net: ethool: add support to get/set tx push by ethtool -G/g Guangbin Huang
2022-04-08 7:12 ` Guangbin Huang [this message]
2022-04-08 21:55 ` [PATCH net-next 1/3] net: ethtool: extend ringparam set/get APIs for tx_push Jakub Kicinski
2022-04-11 7:58 ` wangjie (L)
2022-04-08 7:12 ` [PATCH net-next 2/3] net: ethtool: move checks before rtnl_lock() in ethnl_set_rings Guangbin Huang
2022-04-08 21:58 ` Jakub Kicinski
2022-04-11 8:01 ` wangjie (L)
2022-04-08 7:12 ` [PATCH net-next 3/3] net: hns3: add tx push support in hns3 ring param process Guangbin Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220408071245.40554-2-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=chenhao288@hisilicon.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wangjie125@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®