From: "Pali Rohár" <pali@kernel.org>
To: Armin Wolf <W_Armin@gmx.de>
Cc: jdelvare@suse.com, linux@roeck-us.net,
linux-hwmon@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: (dell-smm) Add cooling device support
Date: Sun, 10 Apr 2022 12:08:45 +0200 [thread overview]
Message-ID: <20220410100845.2isvctcw643yfp7n@pali> (raw)
In-Reply-To: <757b30ef-e250-063f-7523-030f56b1d0b8@gmx.de>
On Saturday 09 April 2022 17:33:48 Armin Wolf wrote:
> Am 30.03.22 um 18:33 schrieb Armin Wolf:
>
> > Until now, only the temperature sensors where exported thru
> > the thermal subsystem. Export the fans as "dell-smm-fan[1-3]" too
> > to make them available as cooling devices.
> > Also update Documentation.
> >
> > Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> > ---
> > Documentation/hwmon/dell-smm-hwmon.rst | 7 ++
> > drivers/hwmon/Kconfig | 1 +
> > drivers/hwmon/dell-smm-hwmon.c | 94 +++++++++++++++++++++++++-
> > 3 files changed, 99 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
> > index d3323a96665d..41839b7de2c1 100644
> > --- a/Documentation/hwmon/dell-smm-hwmon.rst
> > +++ b/Documentation/hwmon/dell-smm-hwmon.rst
> > @@ -86,6 +86,13 @@ probe the BIOS on your machine and discover the appropriate codes.
> >
> > Again, when you find new codes, we'd be happy to have your patches!
> >
> > +``thermal`` interface
> > +---------------------------
> > +
> > +The driver also exports the fans as thermal cooling devices with
> > +``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
> > +using one of the thermal governors.
> > +
> > Module parameters
> > -----------------
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 9ab4e9b3d27b..1175b8e38c45 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -498,6 +498,7 @@ config SENSORS_DS1621
> > config SENSORS_DELL_SMM
> > tristate "Dell laptop SMM BIOS hwmon driver"
> > depends on X86
> > + imply THERMAL
> > help
> > This hwmon driver adds support for reporting temperature of different
> > sensors and controls the fans on Dell laptops via System Management
> > diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> > index 84cb1ede7bc0..0c29386f4bd3 100644
> > --- a/drivers/hwmon/dell-smm-hwmon.c
> > +++ b/drivers/hwmon/dell-smm-hwmon.c
> > @@ -21,6 +21,7 @@
> > #include <linux/errno.h>
> > #include <linux/hwmon.h>
> > #include <linux/init.h>
> > +#include <linux/kconfig.h>
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > #include <linux/mutex.h>
> > @@ -29,6 +30,7 @@
> > #include <linux/seq_file.h>
> > #include <linux/string.h>
> > #include <linux/smp.h>
> > +#include <linux/thermal.h>
> > #include <linux/types.h>
> > #include <linux/uaccess.h>
> >
> > @@ -80,6 +82,11 @@ struct dell_smm_data {
> > int *fan_nominal_speed[DELL_SMM_NO_FANS];
> > };
> >
> > +struct dell_smm_cooling_data {
> > + u8 fan_num;
> > + struct dell_smm_data *data;
> > +};
> > +
> > MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
> > MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
> > MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
> > @@ -638,9 +645,50 @@ static void __init i8k_init_procfs(struct device *dev)
> >
> > #endif
> >
> > -/*
> > - * Hwmon interface
> > - */
> > +static int dell_smm_get_max_state(struct thermal_cooling_device *dev, unsigned long *state)
> > +{
> > + struct dell_smm_cooling_data *cdata = dev->devdata;
> > +
> > + *state = cdata->data->i8k_fan_max;
> > +
> > + return 0;
> > +}
> > +
> > +static int dell_smm_get_cur_state(struct thermal_cooling_device *dev, unsigned long *state)
> > +{
> > + struct dell_smm_cooling_data *cdata = dev->devdata;
> > + int ret;
> > +
> > + ret = i8k_get_fan_status(cdata->data, cdata->fan_num);
> > + if (ret < 0)
> > + return ret;
> > +
> > + *state = ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int dell_smm_set_cur_state(struct thermal_cooling_device *dev, unsigned long state)
> > +{
> > + struct dell_smm_cooling_data *cdata = dev->devdata;
> > + struct dell_smm_data *data = cdata->data;
> > + int ret;
> > +
> > + if (state > data->i8k_fan_max)
> > + return -EINVAL;
> > +
> > + mutex_lock(&data->i8k_mutex);
> > + ret = i8k_set_fan(data, cdata->fan_num, (int)state);
> > + mutex_unlock(&data->i8k_mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct thermal_cooling_device_ops dell_smm_cooling_ops = {
> > + .get_max_state = dell_smm_get_max_state,
> > + .get_cur_state = dell_smm_get_cur_state,
> > + .set_cur_state = dell_smm_set_cur_state,
> > +};
> >
> > static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr,
> > int channel)
> > @@ -941,6 +989,37 @@ static const struct hwmon_chip_info dell_smm_chip_info = {
> > .info = dell_smm_info,
> > };
> >
> > +static int __init dell_smm_init_cdev(struct device *dev, u8 fan_num)
> > +{
> > + struct dell_smm_data *data = dev_get_drvdata(dev);
> > + struct thermal_cooling_device *cdev;
> > + struct dell_smm_cooling_data *cdata;
> > + int ret = 0;
> > + char *name;
> > +
> > + name = kasprintf(GFP_KERNEL, "dell-smm-fan%u", fan_num + 1);
> > + if (!name)
> > + return -ENOMEM;
> > +
> > + cdata = devm_kmalloc(dev, sizeof(*cdata), GFP_KERNEL);
> > + if (cdata) {
> > + cdata->fan_num = fan_num;
> > + cdata->data = data;
> > + cdev = devm_thermal_of_cooling_device_register(dev, NULL, name, cdata,
> > + &dell_smm_cooling_ops);
> > + if (IS_ERR(cdev)) {
> > + devm_kfree(dev, cdata);
> > + ret = PTR_ERR(cdev);
> > + }
> > + } else {
> > + ret = -ENOMEM;
> > + }
> > +
> > + kfree(name);
> > +
> > + return ret;
> > +}
> > +
> > static int __init dell_smm_init_hwmon(struct device *dev)
> > {
> > struct dell_smm_data *data = dev_get_drvdata(dev);
> > @@ -967,6 +1046,15 @@ static int __init dell_smm_init_hwmon(struct device *dev)
> > continue;
> >
> > data->fan[i] = true;
> > +
> > + /* the cooling device it not critical, ignore failures */
> > + if (IS_REACHABLE(CONFIG_THERMAL)) {
> > + err = dell_smm_init_cdev(dev, i);
> > + if (err < 0)
> > + dev_err(dev, "Failed to register cooling device for fan %u\n",
> > + i + 1);
> > + }
> > +
> > data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1,
> > sizeof(*data->fan_nominal_speed[i]),
> > GFP_KERNEL);
> > --
> > 2.30.2
> >
> Any thoughts on this? I tested it on a Dell Inspiron 3505, so i can prove it works.
Hello! If hwmon maintainers are happy with this approach and this new
API then I'm fine with it. Maybe one thing to discuss, should not be
dell_smm_init_cdev() fatal on error?
next prev parent reply other threads:[~2022-04-10 10:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-30 16:33 Armin Wolf
2022-04-09 15:36 ` Armin Wolf
[not found] ` <757b30ef-e250-063f-7523-030f56b1d0b8@gmx.de>
2022-04-10 10:08 ` Pali Rohár [this message]
2022-04-10 13:43 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220410100845.2isvctcw643yfp7n@pali \
--to=pali@kernel.org \
--cc=W_Armin@gmx.de \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®