From: Davidlohr Bueso <dave@stgolabs.net>
To: gregkh@linuxfoundation.org
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
dave@stgolabs.net
Subject: [PATCH 2/6] staging/wlan-ng, prism2usb: replace reaper_bh tasklet with work
Date: Mon, 11 Apr 2022 08:16:16 -0700 [thread overview]
Message-ID: <20220411151620.129178-3-dave@stgolabs.net> (raw)
In-Reply-To: <20220411151620.129178-1-dave@stgolabs.net>
Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.
The reaper_bh tasklet will now run in process context and have further
concurrency (tasklets being serialized among themselves), but this
is done holding the ctlxq.lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
---
drivers/staging/wlan-ng/hfa384x.h | 2 +-
drivers/staging/wlan-ng/hfa384x_usb.c | 14 +++++++-------
drivers/staging/wlan-ng/prism2usb.c | 2 +-
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h
index 98c154a8d8c1..7480d808e946 100644
--- a/drivers/staging/wlan-ng/hfa384x.h
+++ b/drivers/staging/wlan-ng/hfa384x.h
@@ -1227,7 +1227,7 @@ struct hfa384x {
struct timer_list throttle;
- struct tasklet_struct reaper_bh;
+ struct work_struct reaper_bh;
struct tasklet_struct completion_bh;
struct work_struct usb_work;
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 938e11a1a0b6..4000c321cb3a 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -193,7 +193,7 @@ static void hfa384x_usb_throttlefn(struct timer_list *t);
static void hfa384x_usbctlx_completion_task(struct tasklet_struct *t);
-static void hfa384x_usbctlx_reaper_task(struct tasklet_struct *t);
+static void hfa384x_usbctlx_reaper_task(struct work_struct *work);
static int hfa384x_usbctlx_submit(struct hfa384x *hw,
struct hfa384x_usbctlx *ctlx);
@@ -539,7 +539,7 @@ void hfa384x_create(struct hfa384x *hw, struct usb_device *usb)
/* Initialize the authentication queue */
skb_queue_head_init(&hw->authq);
- tasklet_setup(&hw->reaper_bh, hfa384x_usbctlx_reaper_task);
+ INIT_WORK(&hw->reaper_bh, hfa384x_usbctlx_reaper_task);
tasklet_setup(&hw->completion_bh, hfa384x_usbctlx_completion_task);
INIT_WORK(&hw->link_bh, prism2sta_processing_defer);
INIT_WORK(&hw->usb_work, hfa384x_usb_defer);
@@ -2585,7 +2585,7 @@ void hfa384x_tx_timeout(struct wlandevice *wlandev)
/*----------------------------------------------------------------
* hfa384x_usbctlx_reaper_task
*
- * Tasklet to delete dead CTLX objects
+ * Deferred work to delete dead CTLX objects
*
* Arguments:
* data ptr to a struct hfa384x
@@ -2593,12 +2593,12 @@ void hfa384x_tx_timeout(struct wlandevice *wlandev)
* Returns:
*
* Call context:
- * Interrupt
+ * Task
*----------------------------------------------------------------
*/
-static void hfa384x_usbctlx_reaper_task(struct tasklet_struct *t)
+static void hfa384x_usbctlx_reaper_task(struct work_struct *work)
{
- struct hfa384x *hw = from_tasklet(hw, t, reaper_bh);
+ struct hfa384x *hw = container_of(work, struct hfa384x, reaper_bh);
struct hfa384x_usbctlx *ctlx, *temp;
unsigned long flags;
@@ -2686,7 +2686,7 @@ static void hfa384x_usbctlx_completion_task(struct tasklet_struct *t)
spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
if (reap)
- tasklet_schedule(&hw->reaper_bh);
+ schedule_work(&hw->reaper_bh);
}
/*----------------------------------------------------------------
diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c
index dc0749b8eff7..36340f36b0cb 100644
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -182,7 +182,7 @@ static void prism2sta_disconnect_usb(struct usb_interface *interface)
usb_kill_urb(&hw->ctlx_urb);
tasklet_kill(&hw->completion_bh);
- tasklet_kill(&hw->reaper_bh);
+ cancel_work_sync(&hw->reaper_bh);
cancel_work_sync(&hw->link_bh);
cancel_work_sync(&hw->commsqual_bh);
--
2.26.2
next prev parent reply other threads:[~2022-04-11 15:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-11 15:16 [PATCH 0/6] staging: Some tasklet removals Davidlohr Bueso
2022-04-11 15:16 ` [PATCH 1/6] staging/most, dim2: convert dim2_tasklet to threaded irq Davidlohr Bueso
2022-04-11 15:16 ` Davidlohr Bueso [this message]
2022-04-11 15:16 ` [PATCH 3/6] staging/wlan-ng, prism2usb: replace completion_bh tasklet with work Davidlohr Bueso
2022-04-11 15:16 ` [PATCH 4/6] staging/ks7010: replace SME taslet " Davidlohr Bueso
2022-04-11 15:16 ` [PATCH 5/6] staging/rtl8712: remove event_tasklet Davidlohr Bueso
2022-04-11 15:16 ` [PATCH 6/6] staging/rtl8192e,ieee80211: replace ps tasklet with work Davidlohr Bueso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220411151620.129178-3-dave@stgolabs.net \
--to=dave@stgolabs.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®