From: "Paul E. McKenney" <paulmck@kernel.org>
To: Joel Fernandes <joel@joelfernandes.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Josh Triplett <josh@joshtriplett.org>,
Lai Jiangshan <jiangshanlai@gmail.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
rcu <rcu@vger.kernel.org>, Steven Rostedt <rostedt@goodmis.org>,
Frederic Weisbecker <frederic@kernel.org>
Subject: Re: [PATCH RFC] rcu/nocb: Provide default all-CPUs mask for RCU_NOCB_CPU=y
Date: Mon, 11 Apr 2022 08:41:09 -0700 [thread overview]
Message-ID: <20220411154109.GX4285@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <CAEXW_YTunj5j7cxT3VYGGmJwcQowpDiyqmewiwHjyXP-zJd4FA@mail.gmail.com>
On Mon, Apr 11, 2022 at 11:17:02AM -0400, Joel Fernandes wrote:
> Hi Paul,
>
> On Fri, Apr 8, 2022 at 4:54 PM Paul E. McKenney <paulmck@kernel.org> wrote:
> [...]
> > > > > > > > > And is it really all -that- hard to specify an additional boot parameter
> > > > > > > > > across ChromeOS devices? Android seems to manage it. ;-)
> > > > > > > >
> > > > > > > > That's not the hard part I think. The hard part is to make sure a
> > > > > > > > future Linux user who is not an RCU expert does not forget to turn it
> > > > > > > > on. ChromeOS is not the only OS that I've seen someone forget to do it
> > > > > > > > ;-D. AFAIR, there were Android devices too in the past where I saw
> > > > > > > > this forgotten. I don't think we should rely on the users doing the
> > > > > > > > right thing (as much as possible).
> > > > > > > >
> > > > > > > > The single kernel binary point makes sense but in this case, I think
> > > > > > > > the bigger question that I'd have is what is the default behavior and
> > > > > > > > what do *most* users of RCU want. So we can keep sane defaults for the
> > > > > > > > majority and reduce human errors related to configuration.
> > > > > > >
> > > > > > > If both the ChromeOS and Android guys need it, I could reinstate the
> > > > > > > old RCU_NOCB_CPU_ALL Kconfig option. This was removed due to complaints
> > > > > > > about RCU Kconfig complexity, but I believe that Reviewed-by from ChromeOS
> > > > > > > and Android movers and shakers would overcome lingering objections.
> > > > > > >
> > > > > > > Would that help?
> > > > > >
> > > > > > Yes, I think I would love for such a change. I am planning to add a
> > > > > > test to ChromeOS to check whether config options were correctly set
> > > > > > up. So I can test for both the RCU_NOCB_CPU options.
> > > > >
> > > > > Very good!
> > > > >
> > > > > Do you love such a change enough to create the patch and to collect
> > > > > convincing Reviewed-by tags?
> > > >
> > > > Yes sure, just so I understand - basically I have to make the code in
> > > > my patch run when RCU_NOCB_CPU_ALL option is passed (and keep the
> > > > option default disabled), but otherwise default to the current
> > > > behavior, right?
> > >
> > > Sorry rephrasing, "make the code in my patch run when the new
> > > CONFIG_RCU_NOCB_CPU_ALL is enabled".
> >
> > Here is what I believe you are proposing:
> >
> >
> > --- rcu_nocbs rcu_nocbs=???
> >
> > CONFIG_RCU_NOCB_CPU_ALL=n [1] [2] [3]
> >
> > CONFIG_RCU_NOCB_CPU_ALL=y [4] [4] [3]
>
> It is always a pleasure to read your well thought out emails ;-)
>
> >
> > [1] No CPUs are offloaded at boot. CPUs cannot be offloaded at
> > runtime.
> >
> > [2] No CPUs are offloaded at boot, but any CPU can be offloaded
> > (and later de-offloaded) at runtime.
> >
> > [3] The set of CPUs that are offloaded at boot are specified by the
> > mask, represented above with "???". The CPUs that are offloaded
> > at boot can be de-offloaded and offloaded at runtime. The CPUs
> > not offloaded at boot cannot be offloaded at runtime.
>
> Hmm, in other words you are saying that in current code, if only
> select CPUs are offloaded at boot - then only those can be toggled,
> but the others are deemed not offload-able? I am happy to leave that
> quirk/behavior alone as I don't care much right now (for our use
> cases) for runtime toggling.
That is intentional behavior. To see why, suppose that only CPU 0 was
offloaded at boot. Now try offloading some other CPU. A large quantity
of previously read-only data becomes read-write. Synchronization is
not pretty.
On the other hand, default-enabling (de-)offloading on all CPUs creates
lots of unneeded rcuo kthreads.
So we didn't get here by accident. ;-)
If this becomes a problem, I would be thinking in terms of an additional
kernel-boot parameter that made all CPUs offloadable by default. But if
you have a better idea, please do not keep it a secret!
> > [4] All CPUs are offloaded at boot, and any CPU can be de-offloaded
> > and offloaded at runtime. This is the same behavior that
> > you would currently get with CONFIG_RCU_NOCB_CPU_ALL=n and
> > rcu_nocbs=0-N.
>
> Yes, this is the behavior I intend. So then there would not be a need
> to pass a mask (and I suspect for a large number of users, it
> simplifies boot params).
Very good, and from what I can see, this should work for everyone.
> > I believe that Steve Rostedt's review would carry weight for ChromeOS,
> > however, I am suffering a senior moment on the right person for Android.
>
> I think for Android, Kalesh Singh is in the kernel team and Tim Murray
> is the performance lead. They could appropriately represent their RCU
> needs.
Sounds good! Please collect a Reviewed-by from one or both of them.
Thanx, Paul
next prev parent reply other threads:[~2022-04-11 15:41 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 21:07 Joel Fernandes
2022-04-08 14:22 ` Paul E. McKenney
2022-04-08 14:52 ` Joel Fernandes
2022-04-08 15:50 ` Paul E. McKenney
2022-04-08 17:20 ` Joel Fernandes
2022-04-08 17:49 ` Paul E. McKenney
2022-04-08 18:22 ` Joel Fernandes
2022-04-08 18:23 ` Joel Fernandes
2022-04-08 20:54 ` Paul E. McKenney
2022-04-08 21:46 ` Uladzislau Rezki
2022-04-11 14:08 ` Paul E. McKenney
2022-04-11 15:20 ` Uladzislau Rezki
2022-04-11 15:17 ` Joel Fernandes
2022-04-11 15:41 ` Paul E. McKenney [this message]
2022-04-14 19:19 ` Joel Fernandes
2022-04-14 19:42 ` Paul E. McKenney
2022-04-14 19:49 ` Joel Fernandes
2022-04-14 19:51 ` Joel Fernandes
2022-04-14 21:10 ` Paul E. McKenney
2022-04-14 21:09 ` Paul E. McKenney
2022-04-14 21:14 ` Joel Fernandes
2022-04-14 21:31 ` Paul E. McKenney
2022-04-14 21:38 ` Joel Fernandes
2022-04-14 22:37 ` Paul E. McKenney
2022-04-20 20:36 ` Steven Rostedt
2022-04-11 13:49 ` Uladzislau Rezki
2022-04-11 15:17 ` Joel Fernandes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220411154109.GX4285@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=frederic@kernel.org \
--cc=jiangshanlai@gmail.com \
--cc=joel@joelfernandes.org \
--cc=josh@joshtriplett.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®