From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Marcin Kozlowski <marcinguy@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
kuba@kernel.org, pabeni@redhat.com, linux-usb@vger.kernel.org,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.17 32/49] net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
Date: Mon, 11 Apr 2022 20:43:50 -0400 [thread overview]
Message-ID: <20220412004411.349427-32-sashal@kernel.org> (raw)
In-Reply-To: <20220412004411.349427-1-sashal@kernel.org>
From: Marcin Kozlowski <marcinguy@gmail.com>
[ Upstream commit afb8e246527536848b9b4025b40e613edf776a9d ]
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/aqc111.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index ea06d10e1c21..ca409d450a29 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1102,10 +1102,15 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
if (start_of_descs != desc_offset)
goto err;
- /* self check desc_offset from header*/
- if (desc_offset >= skb_len)
+ /* self check desc_offset from header and make sure that the
+ * bounds of the metadata array are inside the SKB
+ */
+ if (pkt_count * 2 + desc_offset >= skb_len)
goto err;
+ /* Packets must not overlap the metadata array */
+ skb_trim(skb, desc_offset);
+
if (pkt_count == 0)
goto err;
--
2.35.1
next prev parent reply other threads:[~2022-04-12 0:47 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 0:43 [PATCH AUTOSEL 5.17 01/49] KVM: PPC: Book3S HV P9: Fix "lost kick" race Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 02/49] drm/amd: Add USBC connector ID Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 03/49] btrfs: fix fallocate to use file_modified to update permissions consistently Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 04/49] btrfs: do not warn for free space inode in cow_file_range Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 05/49] drm/amdgpu: conduct a proper cleanup of PDB bo Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 06/49] drm/amdgpu/gmc: use PCI BARs for APUs in passthrough Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 07/49] drm/amd/display: fix audio format not updated after edid updated Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 08/49] drm/amd/display: FEC check in timing validation Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 09/49] drm/amd/display: Update VTEM Infopacket definition Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 10/49] drm/amdkfd: Fix Incorrect VMIDs passed to HWS Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 11/49] drm/amdgpu/vcn: improve vcn dpg stop procedure Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 12/49] drm/amdkfd: Check for potential null return of kmalloc_array() Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 13/49] Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 14/49] Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 15/49] PCI: hv: Propagate coherence from VMbus device to PCI device Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 16/49] Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 17/49] scsi: target: tcmu: Fix possible page UAF Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 18/49] scsi: lpfc: Improve PCI EEH Error and Recovery Handling Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 19/49] scsi: lpfc: Fix unload hang after back to back PCI EEH faults Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 20/49] scsi: lpfc: Fix queue failures when recovering from PCI parity error Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 21/49] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024 Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 22/49] net: micrel: fix KS8851_MLL Kconfig Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 23/49] ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 24/49] gpu: ipu-v3: Fix dev_dbg frequency output Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 25/49] regulator: wm8994: Add an off-on delay for WM8994 variant Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 26/49] Revert "ACPI: processor: idle: Only flush cache on entering C3" Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 27/49] static_call: Properly initialise DEFINE_STATIC_CALL_RET0() Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 28/49] arm64: alternatives: mark patch_alternative() as `noinstr` Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 29/49] tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 30/49] net: axienet: setup mdio unconditionally Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 31/49] Drivers: hv: balloon: Disable balloon and hot-add accordingly Sasha Levin
2022-04-12 0:43 ` Sasha Levin [this message]
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 33/49] myri10ge: fix an incorrect free for skb in myri10ge_sw_tso Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 34/49] spi: cadence-quadspi: fix protocol setup for non-1-1-X operations Sasha Levin
2022-04-12 11:49 ` Matthias Schiffer
2022-04-12 12:07 ` Mark Brown
2022-04-17 21:33 ` Sasha Levin
2022-04-19 13:15 ` Mark Brown
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 35/49] drm/amd/display: Correct Slice reset calculation Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 36/49] drm/amd/display: Enable power gating before init_pipes Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 37/49] drm/amd/display: Revert FEC check in validation Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 38/49] drm/amd/display: Fix allocate_mst_payload assert on resume Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 39/49] drbd: set QUEUE_FLAG_STABLE_WRITES Sasha Levin
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 40/49] powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit Sasha Levin
2022-04-12 6:35 ` Michael Ellerman
2022-04-12 0:43 ` [PATCH AUTOSEL 5.17 41/49] scsi: mpt3sas: Fail reset operation if config request timed out Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 42/49] scsi: mvsas: Add PCI ID of RocketRaid 2640 Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 43/49] scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 44/49] drivers: net: slip: fix NPD bug in sl_tx_timeout() Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 45/49] x86,bpf: Avoid IBT objtool warning Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 46/49] io_uring: zero tag on rsrc removal Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 47/49] io_uring: use nospec annotation for more indexes Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 48/49] arm64: Add part number for Arm Cortex-A78AE Sasha Levin
2022-04-12 0:44 ` [PATCH AUTOSEL 5.17 49/49] perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412004411.349427-32-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=marcinguy@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®