mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	<linux-omap@vger.kernel.org>, Tony Lindgren <tony@atomide.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next v3 0/3] net: ethernet: ti: enable bc/mc storm prevention support
Date: Tue, 12 Apr 2022 13:29:26 +0300	[thread overview]
Message-ID: <20220412102929.30719-1-grygorii.strashko@ti.com> (raw)

Hi

This series first adds supports for the ALE feature to rate limit number ingress
broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC storm
prevention.

And then enables corresponding support for ingress broadcast(BC)/multicast(MC)
packets rate limiting for TI CPSW switchdev and AM65x/J221E CPSW_NUSS drivers by
implementing HW offload for simple tc-flower with policer action with matches
on dst_mac/mask:
 - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate
limiting (exact match)
 - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC
packets rate limiting

The CPSW supports MC/BC packets rate limiting in packets/sec and affects
all ingress MC/BC packets and serves as BC/MC storm prevention feature.

Examples:
- BC rate limit to 1000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \
  action police pkts_rate 1000 pkts_burst 1 drop

- MC rate limit to 20000pps:
  tc qdisc add dev eth0 clsact
  tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \
  action police rate pkts_rate 20000 pkts_burst 1 drop

  pkts_burst - not used.

The solution inspired patch from Vladimir Oltean [1].

Changes in v3:
  - comments applied
  - policer validation added

Changes in v2:
 - switch to packet-per-second policing introduced by
   commit 2ffe0395288a ("net/sched: act_police: add support for packet-per-second policing") [2]

v2: https://patchwork.kernel.org/project/netdevbpf/cover/20211101170122.19160-1-grygorii.strashko@ti.com/
v1: https://patchwork.kernel.org/project/netdevbpf/cover/20201114035654.32658-1-grygorii.strashko@ti.com/

[1] https://lore.kernel.org/patchwork/patch/1217254/
[2] https://patchwork.kernel.org/project/netdevbpf/cover/20210312140831.23346-1-simon.horman@netronome.com/

Grygorii Strashko (3):
  drivers: net: cpsw: ale: add broadcast/multicast rate limit support
  net: ethernet: ti: am65-cpsw: enable bc/mc storm prevention support
  net: ethernet: ti: cpsw_new: enable bc/mc storm prevention support

 drivers/net/ethernet/ti/am65-cpsw-qos.c | 180 +++++++++++++++++++++
 drivers/net/ethernet/ti/am65-cpsw-qos.h |   8 +
 drivers/net/ethernet/ti/cpsw_ale.c      |  66 ++++++++
 drivers/net/ethernet/ti/cpsw_ale.h      |   2 +
 drivers/net/ethernet/ti/cpsw_new.c      |   4 +-
 drivers/net/ethernet/ti/cpsw_priv.c     | 205 ++++++++++++++++++++++++
 drivers/net/ethernet/ti/cpsw_priv.h     |   8 +
 7 files changed, 472 insertions(+), 1 deletion(-)

-- 
2.17.1


             reply	other threads:[~2022-04-12 11:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-12 10:29 Grygorii Strashko [this message]
2022-04-12 10:29 ` [PATCH net-next v3 1/3] drivers: net: cpsw: ale: add broadcast/multicast rate limit support Grygorii Strashko
2022-04-12 10:29 ` [PATCH net-next v3 2/3] net: ethernet: ti: am65-cpsw: enable bc/mc storm prevention support Grygorii Strashko
2022-04-12 10:29 ` [PATCH net-next v3 3/3] net: ethernet: ti: cpsw_new: " Grygorii Strashko
2022-04-13 11:50 ` [PATCH net-next v3 0/3] net: ethernet: ti: " patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220412102929.30719-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=kishon@ti.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®