mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Cosmin Tanislav <demonsingur@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Jonathan Cameron <jic23@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-iio@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Cosmin Tanislav <cosmin.tanislav@analog.com>
Subject: [PATCH v1 2/3] iio: ABI: adc: ad4130: document filter_mode{,_available}
Date: Wed, 13 Apr 2022 12:40:10 +0300	[thread overview]
Message-ID: <20220413094011.185269-2-cosmin.tanislav@analog.com> (raw)
In-Reply-To: <20220413094011.185269-1-cosmin.tanislav@analog.com>

AD4130-8 is an ultra-low power, high precision,
measurement solution for low bandwidth battery
operated applications.

The fully integrated AFE (Analog Front-End)
includes a multiplexer for up to 16 single-ended
or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip
reference and oscillator, selectable filter
options, smart sequencer, sensor biasing and
excitation options, diagnostics, and a FIFO
buffer.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
---
 .../ABI/testing/sysfs-bus-iio-adc-ad4130      | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
new file mode 100644
index 000000000000..942150991e75
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
@@ -0,0 +1,36 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible filter modes.
+		"sinc4"       - Sinc 4. Excellent noise performance. Long 1st
+				conversion time. No natural 50/60Hz rejection.
+		"sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion time.
+		"sinc3"	      - Sinc3. Moderate 1st conversion time. Good noise
+				performance.
+		"sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling frequency
+				of 50Hz, achieves simultaneous 50Hz and 60Hz
+				rejection.
+		"sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion time.
+				Best used with a sampling frequency of at least
+				216.19Hz.
+		"sinc3+pf1"   - Sinc3 + Post Filter 1.
+				53dB rejection @ 50Hz, 58dB rejection @ 60Hz.
+		"sinc3+pf2"   - Sinc3 + Post Filter 2.
+				70dB rejection @ 50Hz, 70dB rejection @ 60Hz.
+		"sinc3+pf3"   - Sinc3 + Post Filter 3.
+				99dB rejection @ 50Hz, 103dB rejection @ 60Hz.
+		"sinc3+pf4"   - Sinc3 + Post Filter 4.
+				103dB rejection @ 50Hz, 109dB rejection @ 60Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Set the filter mode of the differential channel. When the filter
+		mode changes, the in_voltageY-voltageZ_sampling_frequency and
+		in_voltageY-voltageZ_sampling_frequency_available attributes
+		might also change to accomodate the new filter mode.
+		If the current sampling frequency is out of range for the new
+		filter mode, the sampling frequency will be changed to the
+		closest valid one.
-- 
2.35.1


  reply	other threads:[~2022-04-13  9:40 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13  9:40 [PATCH v1 1/3] dt-bindings: iio: adc: add AD4130 Cosmin Tanislav
2022-04-13  9:40 ` Cosmin Tanislav [this message]
2022-04-13 14:51   ` [PATCH v1 2/3] iio: ABI: adc: ad4130: document filter_mode{,_available} Andy Shevchenko
2022-04-14  7:41     ` Cosmin Tanislav
2022-04-16 15:02   ` Jonathan Cameron
2022-04-13  9:40 ` [PATCH v1 3/3] iio: adc: ad4130: add AD4130 driver Cosmin Tanislav
2022-04-13 15:41   ` Andy Shevchenko
2022-04-14 11:06     ` Cosmin Tanislav
2022-04-14 13:45       ` Andy Shevchenko
2022-04-14 14:53         ` Cosmin Tanislav
2022-04-14 15:37           ` Andy Shevchenko
2022-04-16 15:07             ` Jonathan Cameron
2022-04-16 16:21   ` Jonathan Cameron
2022-04-17 10:26     ` Cosmin Tanislav
2022-04-24 15:51       ` Jonathan Cameron
2022-04-13 12:26 ` [PATCH v1 1/3] dt-bindings: iio: adc: add AD4130 Rob Herring
2022-04-13 14:50 ` Andy Shevchenko
2022-04-16 15:00 ` Jonathan Cameron
2022-04-17 10:16   ` Cosmin Tanislav
2022-04-24 16:05     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413094011.185269-2-cosmin.tanislav@analog.com \
    --to=demonsingur@gmail.com \
    --cc=cosmin.tanislav@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®