From: "D. Starke" <daniel.starke@siemens.com>
To: linux-serial@vger.kernel.org, gregkh@linuxfoundation.org,
jirislaby@kernel.org
Cc: linux-kernel@vger.kernel.org, Daniel Starke <daniel.starke@siemens.com>
Subject: [PATCH 06/20] tty: n_gsm: fix frame reception handling
Date: Thu, 14 Apr 2022 02:42:11 -0700 [thread overview]
Message-ID: <20220414094225.4527-6-daniel.starke@siemens.com> (raw)
In-Reply-To: <20220414094225.4527-1-daniel.starke@siemens.com>
From: Daniel Starke <daniel.starke@siemens.com>
The frame checksum (FCS) is currently handled in gsm_queue() after
reception of a frame. However, this breaks layering. A workaround with
'received_fcs' was implemented so far.
Furthermore, frames are handled as such even if no end flag was received.
Move FCS calculation from gsm_queue() to gsm0_receive() and gsm1_receive().
Also delay gsm_queue() call there until a full frame was received to fix
both points.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
---
drivers/tty/n_gsm.c | 53 +++++++++++++++++++++++++--------------------
1 file changed, 30 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 3ba2505908e3..4ce18b42c37a 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -219,7 +219,6 @@ struct gsm_mux {
int encoding;
u8 control;
u8 fcs;
- u8 received_fcs;
u8 *txframe; /* TX framing buffer */
/* Method for the receiver side */
@@ -1794,18 +1793,7 @@ static void gsm_queue(struct gsm_mux *gsm)
u8 cr;
int address;
int i, j, k, address_tmp;
- /* We have to sneak a look at the packet body to do the FCS.
- A somewhat layering violation in the spec */
- if ((gsm->control & ~PF) == UI)
- gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
- if (gsm->encoding == 0) {
- /* WARNING: gsm->received_fcs is used for
- gsm->encoding = 0 only.
- In this case it contain the last piece of data
- required to generate final CRC */
- gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
- }
if (gsm->fcs != GOOD_FCS) {
gsm->bad_fcs++;
if (debug & 4)
@@ -1993,19 +1981,25 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
break;
case GSM_DATA: /* Data */
gsm->buf[gsm->count++] = c;
- if (gsm->count == gsm->len)
+ if (gsm->count == gsm->len) {
+ /* Calculate final FCS for UI frames over all data */
+ if ((gsm->control & ~PF) != UIH) {
+ gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
+ gsm->count);
+ }
gsm->state = GSM_FCS;
+ }
break;
case GSM_FCS: /* FCS follows the packet */
- gsm->received_fcs = c;
- gsm_queue(gsm);
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
gsm->state = GSM_SSOF;
break;
case GSM_SSOF:
- if (c == GSM0_SOF) {
- gsm->state = GSM_SEARCH;
- break;
- }
+ gsm->state = GSM_SEARCH;
+ if (c == GSM0_SOF)
+ gsm_queue(gsm);
+ else
+ gsm->bad_size++;
break;
default:
pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
@@ -2024,11 +2018,24 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
{
if (c == GSM1_SOF) {
- /* EOF is only valid in frame if we have got to the data state
- and received at least one byte (the FCS) */
- if (gsm->state == GSM_DATA && gsm->count) {
- /* Extract the FCS */
+ /* EOF is only valid in frame if we have got to the data state */
+ if (gsm->state == GSM_DATA) {
+ if (gsm->count < 1) {
+ /* Missing FSC */
+ gsm->malformed++;
+ gsm->state = GSM_START;
+ return;
+ }
+ /* Remove the FCS from data */
gsm->count--;
+ if ((gsm->control & ~PF) != UIH) {
+ /* Calculate final FCS for UI frames over all
+ * data but FCS
+ */
+ gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
+ gsm->count);
+ }
+ /* Add the FCS itself to test against GOOD_FCS */
gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]);
gsm->len = gsm->count;
gsm_queue(gsm);
--
2.25.1
next prev parent reply other threads:[~2022-04-14 9:44 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 9:42 [PATCH 01/20] tty: n_gsm: fix missing mux reset on config change at responder D. Starke
2022-04-14 9:42 ` [PATCH 02/20] tty: n_gsm: fix restart handling via CLD command D. Starke
2022-04-14 9:42 ` [PATCH 03/20] tty: n_gsm: fix decoupled mux resource D. Starke
2022-04-14 9:42 ` [PATCH 04/20] tty: n_gsm: fix mux cleanup after unregister tty device D. Starke
2022-04-14 9:42 ` [PATCH 05/20] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2 D. Starke
2022-04-14 9:42 ` D. Starke [this message]
2022-04-14 9:42 ` [PATCH 07/20] tty: n_gsm: fix malformed counter for out of frame data D. Starke
2022-04-14 9:42 ` [PATCH 08/20] tty: n_gsm: fix insufficient txframe size D. Starke
2022-04-14 9:42 ` [PATCH 09/20] tty: n_gsm: fix wrong DLCI release order D. Starke
2022-04-14 9:42 ` [PATCH 10/20] tty: n_gsm: fix missing explicit ldisc flush D. Starke
2022-04-14 9:42 ` [PATCH 11/20] tty: n_gsm: fix wrong command retry handling D. Starke
2022-04-14 9:42 ` [PATCH 12/20] tty: n_gsm: fix wrong command frame length field encoding D. Starke
2022-04-14 9:42 ` [PATCH 13/20] tty: n_gsm: fix wrong signal octets encoding in MSC D. Starke
2022-04-14 9:42 ` [PATCH 14/20] tty: n_gsm: fix missing tty wakeup in convergence layer type 2 D. Starke
2022-04-14 9:42 ` [PATCH 15/20] tty: n_gsm: fix missing update of modem controls after DLCI open D. Starke
2022-04-15 6:29 ` Greg KH
2022-04-19 8:07 ` [PATCH v2 " D. Starke
2022-04-19 10:07 ` Greg KH
2022-04-14 9:42 ` [PATCH 16/20] tty: n_gsm: fix invalid command/response bit check for UI/UIH frames D. Starke
2022-04-15 6:31 ` Greg KH
2022-04-19 8:17 ` [PATCH v2 16/20] tty: n_gsm: clean up dead code in gsm_queue() D. Starke
2022-04-19 10:06 ` Greg KH
2022-04-19 10:07 ` Greg KH
2022-04-14 9:42 ` [PATCH 17/20] tty: n_gsm: fix reset fifo race condition D. Starke
2022-04-14 9:42 ` [PATCH 18/20] tty: n_gsm: fix implicit CR bit encoding in address field D. Starke
2022-04-15 6:33 ` Greg KH
2022-04-19 8:19 ` [PATCH v2 18/20] tty: n_gsm: clean up " D. Starke
2022-04-19 10:06 ` Greg KH
2022-04-14 9:42 ` [PATCH 19/20] tty: n_gsm: fix wrong behavior of gsm_carrier_raised() on debug D. Starke
2022-04-15 6:34 ` Greg KH
2022-04-14 9:42 ` [PATCH 20/20] tty: n_gsm: fix incorrect UA handling D. Starke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220414094225.4527-6-daniel.starke@siemens.com \
--to=daniel.starke@siemens.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®