From: "José Expósito" <jose.exposito89@gmail.com>
To: emma@anholt.net
Cc: mripard@kernel.org, laurent.pinchart@ideasonboard.com,
airlied@linux.ie, daniel@ffwll.ch, p.zabel@pengutronix.de,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
"José Expósito" <jose.exposito89@gmail.com>
Subject: [PATCH v2 2/2] drm/vc4: hdmi: Remove vc4_hdmi_encoder.hdmi_monitor
Date: Fri, 15 Apr 2022 17:47:45 +0200 [thread overview]
Message-ID: <20220415154745.170597-3-jose.exposito89@gmail.com> (raw)
In-Reply-To: <20220415154745.170597-1-jose.exposito89@gmail.com>
The vc4_hdmi_encoder.hdmi_monitor field was used to cache the value
returned by drm_detect_hdmi_monitor() in order to avoid calling it
multiple times.
Now that drm_detect_hdmi_monitor() has been replaced with
drm_display_info.is_hdmi, there is no need to cache it in the driver
encoder struct.
Remove vc4_hdmi_encoder.hdmi_monitor and use drm_display_info.is_hdmi
instead.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 ++++++-----------
drivers/gpu/drm/vc4/vc4_hdmi.h | 1 -
2 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ecdb1ffc2023..9c73a211ae80 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -107,9 +107,9 @@ static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi,
const struct drm_display_mode *mode)
{
- struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
+ struct drm_display_info *display = &vc4_hdmi->connector.display_info;
- return !vc4_encoder->hdmi_monitor ||
+ return !display->is_hdmi ||
drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL;
}
@@ -216,7 +216,6 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
if (edid) {
cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap, edid);
- vc4_hdmi->encoder.hdmi_monitor = connector->display_info.is_hdmi;
kfree(edid);
}
}
@@ -242,7 +241,6 @@ static void vc4_hdmi_connector_destroy(struct drm_connector *connector)
static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
{
struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
- struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
int ret = 0;
struct edid *edid;
@@ -255,8 +253,6 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
goto out;
}
- vc4_encoder->hdmi_monitor = connector->display_info.is_hdmi;
-
drm_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
@@ -578,13 +574,12 @@ static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
static bool vc4_hdmi_supports_scrambling(struct drm_encoder *encoder,
struct drm_display_mode *mode)
{
- struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
struct drm_display_info *display = &vc4_hdmi->connector.display_info;
lockdep_assert_held(&vc4_hdmi->mutex);
- if (!vc4_encoder->hdmi_monitor)
+ if (!display->is_hdmi)
return false;
if (!display->hdmi.scdc.supported ||
@@ -1147,7 +1142,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
- struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+ struct drm_display_info *display = &vc4_hdmi->connector.display_info;
bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
unsigned long flags;
@@ -1168,7 +1163,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
HDMI_WRITE(HDMI_VID_CTL,
HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_BLANKPIX);
- if (vc4_encoder->hdmi_monitor) {
+ if (display->is_hdmi) {
HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
HDMI_READ(HDMI_SCHEDULER_CONTROL) |
VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI);
@@ -1195,7 +1190,7 @@ static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
"!VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE\n");
}
- if (vc4_encoder->hdmi_monitor) {
+ if (display->is_hdmi) {
spin_lock_irqsave(&vc4_hdmi->hw_lock, flags);
WARN_ON(!(HDMI_READ(HDMI_SCHEDULER_CONTROL) &
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 1076faeab616..44977002445f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -11,7 +11,6 @@
/* VC4 HDMI encoder KMS struct */
struct vc4_hdmi_encoder {
struct vc4_encoder base;
- bool hdmi_monitor;
};
static inline struct vc4_hdmi_encoder *
--
2.25.1
next prev parent reply other threads:[~2022-04-15 15:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-15 15:47 [PATCH v2 0/2] drm/vc4: hdmi: Replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi José Expósito
2022-04-15 15:47 ` [PATCH v2 1/2] drm/vc4: hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi José Expósito
2022-04-15 15:47 ` José Expósito [this message]
2022-04-19 12:41 ` [PATCH v2 2/2] drm/vc4: hdmi: Remove vc4_hdmi_encoder.hdmi_monitor Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220415154745.170597-3-jose.exposito89@gmail.com \
--to=jose.exposito89@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=emma@anholt.net \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®