mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>,
	Rick Edgecombe <rick.p.edgecombe@intel.com>,
	"Shankar, Ravi V" <ravi.v.shankar@intel.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH V10 17/44] x86/entry: Add auxiliary pt_regs space
Date: Tue, 19 Apr 2022 10:06:22 -0700	[thread overview]
Message-ID: <20220419170649.1022246-18-ira.weiny@intel.com> (raw)
In-Reply-To: <20220419170649.1022246-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

The PKRS MSR is not managed by XSAVE.  In order for the MSR to be saved
during an exception the current CPU MSR value needs to be saved
somewhere during the exception and restored when returning to the
previous context.

Two possible places for preserving this state were considered,
irqentry_state_t or pt_regs.[1]  pt_regs was much more complicated and
was potentially fraught with unintended consequences.[2] However, Andy
Lutomirski came up with a way to hide additional values on the stack
which could be accessed as "extended_pt_regs".[3] This method allows any
function with current access to pt_regs to obtain access to the extra
information without expanding the use of irqentry_state_t and leaving
pt_regs intact for compatibility with outside tools like BPF.

Prepare the assembly code to add a hidden auxiliary pt_regs space.  To
simplify, the assembly code only adds space on the stack as defined by
the C code which needs it.  The use of this space is left to the C code
which is required to select ARCH_HAS_PTREGS_AUXILIARY to enable this
support.

Each nested exception gets another copy of this auxiliary space allowing
for any number of levels of exception handling.

Initially the space is left empty and results in no code changes because
ARCH_HAS_PTREGS_AUXILIARY is not set.  Subsequent patches adding data to
pt_regs_auxiliary must set ARCH_HAS_PTREGS_AUXILIARY or a build failure
will occur.  The use of ARCH_HAS_PTREGS_AUXILIARY also avoids the
introduction of 2 instructions (addq/subq) on every entry call when the
extra space is not needed.

32bit is specifically excluded as the current consumer of this, PKS,
will not support 32bit either.

Peter, Thomas, Andy, Dave, and Dan all suggested parts of the patch or
aided in the development of the patch..

[1] https://lore.kernel.org/lkml/CALCETrVe1i5JdyzD_BcctxQJn+ZE3T38EFPgjxN1F577M36g+w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/874kpxx4jf.fsf@nanos.tec.linutronix.de/#t
[3] https://lore.kernel.org/lkml/CALCETrUHwZPic89oExMMe-WyDY8-O3W68NcZvse3=PGW+iW5=w@mail.gmail.com/

Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes for V9:
	Update commit message

Changes for V8:
	Exclude 32bit
	Introduce ARCH_HAS_PTREGS_AUXILIARY to optimize this away when
		not needed.
	From Thomas
		s/EXTENDED_PT_REGS_SIZE/PT_REGS_AUX_SIZE
		Fix up PTREGS_AUX_SIZE macro to be based on the
			structures and used in assembly code via the
			nifty asm-offset macros
		Bound calls into c code with [PUSH|POP]_RTREGS_AUXILIARY
			instead of using a macro 'call'
	Split this patch out and put the PKS specific stuff in a
		separate patch

Changes for V7:
	Rebased to 5.14 entry code
	declare write_pkrs() in pks.h
	s/INIT_PKRS_VALUE/pkrs_init_value
	Remove unnecessary INIT_PKRS_VALUE def
	s/pkrs_save_set_irq/pkrs_save_irq/
		The inital value for exceptions is best managed
		completely within the pkey code.
---
 arch/x86/Kconfig                 |  4 ++++
 arch/x86/entry/calling.h         | 20 ++++++++++++++++++++
 arch/x86/entry/entry_64.S        | 22 ++++++++++++++++++++++
 arch/x86/entry/entry_64_compat.S |  6 ++++++
 arch/x86/include/asm/ptrace.h    | 18 ++++++++++++++++++
 arch/x86/kernel/asm-offsets_64.c | 15 +++++++++++++++
 arch/x86/kernel/head_64.S        |  6 ++++++
 7 files changed, 91 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c53deda2ea25..69e611d3b8ef 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1889,6 +1889,10 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS
 
 	  If unsure, say y.
 
+config ARCH_HAS_PTREGS_AUXILIARY
+	depends on X86_64
+	bool
+
 choice
 	prompt "TSX enable mode"
 	depends on CPU_SUP_INTEL
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index a4c061fb7c6e..d0ebf9b069c9 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -63,6 +63,26 @@ For 32-bit we have the following conventions - kernel is built with
  * for assembly code:
  */
 
+
+#ifdef CONFIG_ARCH_HAS_PTREGS_AUXILIARY
+
+.macro PUSH_PTREGS_AUXILIARY
+	/* add space for pt_regs_auxiliary */
+	subq $PTREGS_AUX_SIZE, %rsp
+.endm
+
+.macro POP_PTREGS_AUXILIARY
+	/* remove space for pt_regs_auxiliary */
+	addq $PTREGS_AUX_SIZE, %rsp
+.endm
+
+#else
+
+#define PUSH_PTREGS_AUXILIARY
+#define POP_PTREGS_AUXILIARY
+
+#endif
+
 .macro PUSH_REGS rdx=%rdx rax=%rax save_ret=0
 	.if \save_ret
 	pushq	%rsi		/* pt_regs->si */
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 4faac48ebec5..5a037a56814d 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -335,7 +335,9 @@ SYM_CODE_END(ret_from_fork)
 		movq	$-1, ORIG_RAX(%rsp)	/* no syscall to restart */
 	.endif
 
+	PUSH_PTREGS_AUXILIARY
 	call	\cfunc
+	POP_PTREGS_AUXILIARY
 
 	jmp	error_return
 .endm
@@ -440,7 +442,9 @@ SYM_CODE_START(\asmsym)
 
 	movq	%rsp, %rdi		/* pt_regs pointer */
 
+	PUSH_PTREGS_AUXILIARY
 	call	\cfunc
+	POP_PTREGS_AUXILIARY
 
 	jmp	paranoid_exit
 
@@ -502,7 +506,9 @@ SYM_CODE_START(\asmsym)
 	 * stack.
 	 */
 	movq	%rsp, %rdi		/* pt_regs pointer */
+	PUSH_PTREGS_AUXILIARY
 	call	vc_switch_off_ist
+	POP_PTREGS_AUXILIARY
 	movq	%rax, %rsp		/* Switch to new stack */
 
 	UNWIND_HINT_REGS
@@ -513,7 +519,9 @@ SYM_CODE_START(\asmsym)
 
 	movq	%rsp, %rdi		/* pt_regs pointer */
 
+	PUSH_PTREGS_AUXILIARY
 	call	kernel_\cfunc
+	POP_PTREGS_AUXILIARY
 
 	/*
 	 * No need to switch back to the IST stack. The current stack is either
@@ -549,7 +557,9 @@ SYM_CODE_START(\asmsym)
 	movq	%rsp, %rdi		/* pt_regs pointer into first argument */
 	movq	ORIG_RAX(%rsp), %rsi	/* get error code into 2nd argument*/
 	movq	$-1, ORIG_RAX(%rsp)	/* no syscall to restart */
+	PUSH_PTREGS_AUXILIARY
 	call	\cfunc
+	POP_PTREGS_AUXILIARY
 
 	/* For some configurations \cfunc ends up being a noreturn. */
 	REACHABLE
@@ -802,7 +812,9 @@ SYM_CODE_START_LOCAL(exc_xen_hypervisor_callback)
 	movq	%rdi, %rsp			/* we don't return, adjust the stack frame */
 	UNWIND_HINT_REGS
 
+	PUSH_PTREGS_AUXILIARY
 	call	xen_pv_evtchn_do_upcall
+	POP_PTREGS_AUXILIARY
 
 	jmp	error_return
 SYM_CODE_END(exc_xen_hypervisor_callback)
@@ -1003,7 +1015,9 @@ SYM_CODE_START_LOCAL(error_entry)
 	/* Put us onto the real thread stack. */
 	popq	%r12				/* save return addr in %12 */
 	movq	%rsp, %rdi			/* arg0 = pt_regs pointer */
+	PUSH_PTREGS_AUXILIARY
 	call	sync_regs
+	POP_PTREGS_AUXILIARY
 	movq	%rax, %rsp			/* switch stack */
 	ENCODE_FRAME_POINTER
 	pushq	%r12
@@ -1059,7 +1073,9 @@ SYM_CODE_START_LOCAL(error_entry)
 	 * as if we faulted immediately after IRET.
 	 */
 	mov	%rsp, %rdi
+	PUSH_PTREGS_AUXILIARY
 	call	fixup_bad_iret
+	POP_PTREGS_AUXILIARY
 	mov	%rax, %rsp
 	jmp	.Lerror_entry_from_usermode_after_swapgs
 SYM_CODE_END(error_entry)
@@ -1166,7 +1182,9 @@ SYM_CODE_START(asm_exc_nmi)
 
 	movq	%rsp, %rdi
 	movq	$-1, %rsi
+	PUSH_PTREGS_AUXILIARY
 	call	exc_nmi
+	POP_PTREGS_AUXILIARY
 
 	/*
 	 * Return back to user mode.  We must *not* do the normal exit
@@ -1202,6 +1220,8 @@ SYM_CODE_START(asm_exc_nmi)
 	 * +---------------------------------------------------------+
 	 * | pt_regs                                                 |
 	 * +---------------------------------------------------------+
+	 * | (Optionally) pt_regs_extended                           |
+	 * +---------------------------------------------------------+
 	 *
 	 * The "original" frame is used by hardware.  Before re-enabling
 	 * NMIs, we need to be done with it, and we need to leave enough
@@ -1380,7 +1400,9 @@ end_repeat_nmi:
 
 	movq	%rsp, %rdi
 	movq	$-1, %rsi
+	PUSH_PTREGS_AUXILIARY
 	call	exc_nmi
+	POP_PTREGS_AUXILIARY
 
 	/* Always restore stashed CR3 value (see paranoid_entry) */
 	RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 4fdb007cddbd..cf6c88eb384d 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -137,7 +137,9 @@ SYM_INNER_LABEL(entry_SYSENTER_compat_after_hwframe, SYM_L_GLOBAL)
 .Lsysenter_flags_fixed:
 
 	movq	%rsp, %rdi
+	PUSH_PTREGS_AUXILIARY
 	call	do_SYSENTER_32
+	POP_PTREGS_AUXILIARY
 	/* XEN PV guests always use IRET path */
 	ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \
 		    "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
@@ -257,7 +259,9 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	UNWIND_HINT_REGS
 
 	movq	%rsp, %rdi
+	PUSH_PTREGS_AUXILIARY
 	call	do_fast_syscall_32
+	POP_PTREGS_AUXILIARY
 	/* XEN PV guests always use IRET path */
 	ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \
 		    "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
@@ -415,6 +419,8 @@ SYM_CODE_START(entry_INT80_compat)
 	cld
 
 	movq	%rsp, %rdi
+	PUSH_PTREGS_AUXILIARY
 	call	do_int80_syscall_32
+	POP_PTREGS_AUXILIARY
 	jmp	swapgs_restore_regs_and_return_to_usermode
 SYM_CODE_END(entry_INT80_compat)
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 4357e0f2cd5f..0889045b3a6f 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -2,6 +2,7 @@
 #ifndef _ASM_X86_PTRACE_H
 #define _ASM_X86_PTRACE_H
 
+#include <linux/container_of.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <uapi/asm/ptrace.h>
@@ -91,6 +92,23 @@ struct pt_regs {
 /* top of stack page */
 };
 
+/*
+ * NOTE: Features which add data to pt_regs_auxiliary must select
+ * ARCH_HAS_PTREGS_AUXILIARY.  Failure to do so will result in a build failure.
+ */
+struct pt_regs_auxiliary {
+};
+
+struct pt_regs_extended {
+	struct pt_regs_auxiliary aux;
+	struct pt_regs pt_regs __aligned(8);
+};
+
+static inline struct pt_regs_extended *to_extended_pt_regs(struct pt_regs *regs)
+{
+	return container_of(regs, struct pt_regs_extended, pt_regs);
+}
+
 #endif /* !__i386__ */
 
 #ifdef CONFIG_PARAVIRT
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index b14533af7676..66f08ac3507a 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -4,6 +4,7 @@
 #endif
 
 #include <asm/ia32.h>
+#include <asm/ptrace.h>
 
 #if defined(CONFIG_KVM_GUEST) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 #include <asm/kvm_para.h>
@@ -60,5 +61,19 @@ int main(void)
 	DEFINE(stack_canary_offset, offsetof(struct fixed_percpu_data, stack_canary));
 	BLANK();
 #endif
+
+#ifdef CONFIG_ARCH_HAS_PTREGS_AUXILIARY
+	/* Size of Auxiliary pt_regs data */
+	DEFINE(PTREGS_AUX_SIZE, sizeof(struct pt_regs_extended) -
+				sizeof(struct pt_regs));
+#else
+	/*
+	 * Adding data to struct pt_regs_auxiliary requires setting
+	 * ARCH_HAS_PTREGS_AUXILIARY
+	 */
+	BUILD_BUG_ON((sizeof(struct pt_regs_extended) -
+		      sizeof(struct pt_regs)) != 0);
+#endif
+
 	return 0;
 }
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b8e3019547a5..00bc3a74efb7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -341,8 +341,10 @@ SYM_CODE_START_NOALIGN(vc_boot_ghcb)
 	movq    %rsp, %rdi
 	movq	ORIG_RAX(%rsp), %rsi
 	movq	initial_vc_handler(%rip), %rax
+	PUSH_PTREGS_AUXILIARY
 	ANNOTATE_RETPOLINE_SAFE
 	call	*%rax
+	POP_PTREGS_AUXILIARY
 
 	/* Unwind pt_regs */
 	POP_REGS
@@ -421,7 +423,9 @@ SYM_CODE_START_LOCAL(early_idt_handler_common)
 	UNWIND_HINT_REGS
 
 	movq %rsp,%rdi		/* RDI = pt_regs; RSI is already trapnr */
+	PUSH_PTREGS_AUXILIARY
 	call do_early_exception
+	POP_PTREGS_AUXILIARY
 
 	decl early_recursion_flag(%rip)
 	jmp restore_regs_and_return_to_kernel
@@ -448,7 +452,9 @@ SYM_CODE_START_NOALIGN(vc_no_ghcb)
 	/* Call C handler */
 	movq    %rsp, %rdi
 	movq	ORIG_RAX(%rsp), %rsi
+	PUSH_PTREGS_AUXILIARY
 	call    do_vc_no_ghcb
+	POP_PTREGS_AUXILIARY
 
 	/* Unwind pt_regs */
 	POP_REGS
-- 
2.35.1


  parent reply	other threads:[~2022-04-19 17:10 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-19 17:06 [PATCH V10 00/44] PKS/PMEM: Add Stray Write Protection ira.weiny
2022-04-19 17:06 ` [PATCH V10 01/44] Documentation/protection-keys: Clean up documentation for User Space pkeys ira.weiny
2022-06-07 23:09   ` [tip: x86/mm] " tip-bot2 for Ira Weiny
2022-04-19 17:06 ` [PATCH V10 02/44] x86/pkeys: Clarify PKRU_AD_KEY macro ira.weiny
2022-06-07 23:09   ` [tip: x86/mm] " tip-bot2 for Ira Weiny
2022-04-19 17:06 ` [PATCH V10 03/44] x86/pkeys: Make PKRU macros generic ira.weiny
2022-04-19 17:06 ` [PATCH V10 04/44] x86/fpu: Refactor arch_set_user_pkey_access() ira.weiny
2022-04-19 17:06 ` [PATCH V10 05/44] mm/pkeys: Add Kconfig options for PKS ira.weiny
2022-04-19 17:06 ` [PATCH V10 06/44] x86/pkeys: Add PKS CPU feature bit ira.weiny
2022-04-19 17:06 ` [PATCH V10 07/44] x86/fault: Adjust WARN_ON for pkey fault ira.weiny
2022-04-19 17:06 ` [PATCH V10 08/44] Documentation/pkeys: Add initial PKS documentation ira.weiny
2022-05-09 22:03   ` Kees Cook
2022-05-10 17:18     ` Ira Weiny
2022-05-10 20:17       ` Kees Cook
2022-04-19 17:06 ` [PATCH V10 09/44] mm/pkeys: Provide for PKS key allocation ira.weiny
2022-04-19 17:06 ` [PATCH V10 10/44] x86/pkeys: Enable PKS on cpus which support it ira.weiny
2022-04-19 17:06 ` [PATCH V10 11/44] mm/pkeys: Define PKS page table macros ira.weiny
2022-04-19 17:06 ` [PATCH V10 12/44] x86/pkeys: Introduce pks_write_pkrs() ira.weiny
2022-04-19 17:06 ` [PATCH V10 13/44] x86/pkeys: Preserve the PKS MSR on context switch ira.weiny
2022-04-19 17:06 ` [PATCH V10 14/44] mm/pkeys: Introduce pks_set_readwrite() ira.weiny
2022-05-09 21:38   ` Kees Cook
2022-05-10 21:33     ` Ira Weiny
2022-05-10 22:08       ` Kees Cook
2022-05-10 22:26         ` Edgecombe, Rick P
2022-05-11  3:15           ` Kees Cook
2022-05-11 17:59             ` Ira Weiny
2022-04-19 17:06 ` [PATCH V10 15/44] mm/pkeys: Introduce pks_set_noaccess() ira.weiny
2022-04-19 17:06 ` [PATCH V10 16/44] mm/pkeys: Introduce PKS fault callbacks ira.weiny
2022-04-19 17:06 ` ira.weiny [this message]
2022-04-19 17:06 ` [PATCH V10 18/44] entry: Pass pt_regs to irqentry_exit_cond_resched() ira.weiny
2022-04-19 17:06 ` [PATCH V10 19/44] entry: Add calls for save/restore auxiliary pt_regs ira.weiny
2022-04-19 17:06 ` [PATCH V10 20/44] x86/entry: Define arch_{save|restore}_auxiliary_pt_regs() ira.weiny
2022-04-19 17:06 ` [PATCH V10 21/44] x86/pkeys: Preserve PKRS MSR across exceptions ira.weiny
2022-04-19 17:06 ` [PATCH V10 22/44] x86/fault: Print PKS MSR on fault ira.weiny
2022-04-19 17:06 ` [PATCH V10 23/44] mm/pkeys: Introduce pks_update_exception() ira.weiny
2022-04-19 17:06 ` [PATCH V10 24/44] mm/pkeys: Add pks_available() ira.weiny
2022-04-19 17:06 ` [PATCH V10 25/44] memremap_pages: Add Kconfig for DEVMAP_ACCESS_PROTECTION ira.weiny
2022-04-19 17:06 ` [PATCH V10 26/44] memremap_pages: Introduce pgmap_protection_available() ira.weiny
2022-04-19 17:06 ` [PATCH V10 27/44] memremap_pages: Introduce a PGMAP_PROTECTION flag ira.weiny
2022-04-19 17:06 ` [PATCH V10 28/44] memremap_pages: Introduce devmap_protected() ira.weiny
2022-04-19 17:06 ` [PATCH V10 29/44] memremap_pages: Reserve a PKS pkey for eventual use by PMEM ira.weiny
2022-04-19 17:06 ` [PATCH V10 30/44] memremap_pages: Set PKS pkey in PTEs if requested ira.weiny
2022-04-19 17:06 ` [PATCH V10 31/44] memremap_pages: Define pgmap_set_{readwrite|noaccess}() calls ira.weiny
2022-04-19 17:06 ` [PATCH V10 32/44] memremap_pages: Add memremap.pks_fault_mode ira.weiny
2022-04-19 17:06 ` [PATCH V10 33/44] kmap: Make kmap work for devmap protected pages ira.weiny
2022-04-28 15:50   ` Christoph Hellwig
2022-05-12  1:25     ` Ira Weiny
2022-05-17 22:46       ` Ira Weiny
2022-05-18  7:33         ` Christoph Hellwig
2022-05-19 20:29           ` Ira Weiny
2022-04-19 17:06 ` [PATCH V10 34/44] dax: Stray access protection for dax_direct_access() ira.weiny
2022-04-19 17:06 ` [PATCH V10 35/44] nvdimm/pmem: Enable stray access protection ira.weiny
2022-04-19 17:06 ` [PATCH V10 36/44] devdax: " ira.weiny
2022-04-19 17:06 ` [PATCH V10 37/44] mm/pkeys: PKS testing, add initial test code ira.weiny
2022-04-19 17:06 ` [PATCH V10 38/44] x86/selftests: Add test_pks ira.weiny
2022-04-19 17:06 ` [PATCH V10 39/44] mm/pkeys: PKS testing, add a fault call back ira.weiny
2022-04-19 17:06 ` [PATCH V10 40/44] mm/pkeys: PKS testing, add pks_set_*() tests ira.weiny
2022-04-19 17:06 ` [PATCH V10 41/44] mm/pkeys: PKS testing, test context switching ira.weiny
2022-04-19 17:06 ` [PATCH V10 42/44] mm/pkeys: PKS testing, Add exception test ira.weiny
2022-04-19 17:06 ` [PATCH V10 43/44] mm/pkeys: PKS testing, test pks_update_exception() ira.weiny
2022-04-19 17:06 ` [PATCH V10 44/44] mm/pkeys: PKS testing, add test for all keys ira.weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220419170649.1022246-18-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ravi.v.shankar@intel.com \
    --cc=rick.p.edgecombe@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®