From: "Paul E. McKenney" <paulmck@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
x86@kernel.org, "Rafael J. Wysocki" <rafael@kernel.org>,
linux-pm@vger.kernel.org, Eric Dumazet <edumazet@google.com>
Subject: Re: [patch 00/10] x86/cpu: Consolidate APERF/MPERF code
Date: Tue, 19 Apr 2022 14:56:56 -0700 [thread overview]
Message-ID: <20220419215656.GT4285@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <20220415133356.179706384@linutronix.de>
On Fri, Apr 15, 2022 at 09:19:48PM +0200, Thomas Gleixner wrote:
> APERF/MPERF is utilized in two ways:
>
> 1) Ad hoc readout of CPU frequency which requires IPIs
>
> 2) Frequency scale calculation for frequency invariant scheduling which
> reads APERF/MPERF on every tick.
>
> These are completely independent code parts. Eric observed long latencies
> when reading /proc/cpuinfo which reads out CPU frequency via #1 and
> proposed to replace the per CPU single IPI with a broadcast IPI.
>
> While this makes the latency smaller, it is not necessary at all because #2
> samples APERF/MPERF periodically, except on idle or isolated NOHZ full CPUs
> which are excluded from IPI already.
>
> It could be argued that not all APERF/MPERF capable systems have the
> required BIOS information to enable frequency invariance support, but in
> practice most of them do. So the APERF/MPERF sampling can be made
> unconditional and just the frequency scale calculation for the scheduler
> excluded.
>
> The following series consolidates that.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
> Thanks,
>
> tglx
> ---
> arch/x86/include/asm/cpu.h | 2
> arch/x86/include/asm/topology.h | 17 -
> arch/x86/kernel/acpi/cppc.c | 28 --
> arch/x86/kernel/cpu/aperfmperf.c | 474 +++++++++++++++++++++++++++++++--------
> arch/x86/kernel/cpu/proc.c | 2
> arch/x86/kernel/smpboot.c | 358 -----------------------------
> fs/proc/cpuinfo.c | 6
> include/linux/cpufreq.h | 1
> 8 files changed, 405 insertions(+), 483 deletions(-)
>
>
prev parent reply other threads:[~2022-04-19 21:57 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-15 19:19 Thomas Gleixner
2022-04-15 19:19 ` [patch 01/10] x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu() Thomas Gleixner
2022-04-19 15:34 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 02/10] x86/smp: Move APERF/MPERF code where it belongs Thomas Gleixner
2022-04-19 15:40 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 03/10] x86/aperfmperf: Separate AP/BP frequency invariance init Thomas Gleixner
2022-04-19 16:04 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 04/10] x86/aperfmperf: Untangle Intel and AMD " Thomas Gleixner
2022-04-19 16:12 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 05/10] x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct Thomas Gleixner
2022-04-19 16:15 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 06/10] x86/aperfmperf: Restructure arch_scale_freq_tick() Thomas Gleixner
2022-04-19 16:20 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:19 ` [patch 07/10] x86/aperfmperf: Make parts of the frequency invariance code unconditional Thomas Gleixner
2022-04-19 16:27 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:20 ` [patch 08/10] x86/aperfmperf: Store aperf/mperf data for cpu frequency reads Thomas Gleixner
2022-04-19 16:30 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:20 ` [patch 09/10] x86/aperfmperf: Replace aperfmperf_get_khz() Thomas Gleixner
2022-04-19 16:35 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-15 19:20 ` [patch 10/10] x86/aperfmperf: Replace arch_freq_get_on_cpu() Thomas Gleixner
2022-04-19 16:37 ` Rafael J. Wysocki
2022-04-27 13:56 ` [tip: x86/cleanups] " tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-19 15:51 ` [patch 00/10] x86/cpu: Consolidate APERF/MPERF code Eric Dumazet
2022-04-19 20:39 ` Thomas Gleixner
2022-04-19 21:20 ` Eric Dumazet
2022-04-19 16:41 ` Peter Zijlstra
2022-04-19 17:32 ` Doug Smythies
2022-04-19 18:49 ` Rafael J. Wysocki
2022-04-19 21:11 ` Thomas Gleixner
2022-04-20 22:08 ` Doug Smythies
2022-04-25 15:45 ` Thomas Gleixner
2022-04-25 23:20 ` Doug Smythies
2022-04-27 13:56 ` [tip: x86/cleanups] x86/aperfmperf: Integrate the fallback code from show_cpuinfo() tip-bot2 for Thomas Gleixner
2022-04-27 18:27 ` tip-bot2 for Thomas Gleixner
2022-04-19 21:56 ` Paul E. McKenney [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220419215656.GT4285@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=edumazet@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®