From: "D. Starke" <daniel.starke@siemens.com>
To: linux-serial@vger.kernel.org, gregkh@linuxfoundation.org,
jirislaby@kernel.org
Cc: linux-kernel@vger.kernel.org, Daniel Starke <daniel.starke@siemens.com>
Subject: [PATCH 3/3] tty: n_gsm: fix software flow control handling
Date: Fri, 22 Apr 2022 00:10:25 -0700 [thread overview]
Message-ID: <20220422071025.5490-3-daniel.starke@siemens.com> (raw)
In-Reply-To: <20220422071025.5490-1-daniel.starke@siemens.com>
From: Daniel Starke <daniel.starke@siemens.com>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters
shall be used instead of Fcon/Fcoff command in advanced option mode to
handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters
shall be handled. Basic option mode only used Fcon/Fcoff commands and no
XON/XOFF characters. These are treated as data bytes here.
The current implementation uses the gsm_mux field 'constipated' to handle
flow control from the remote peer and the gsm_dlci field 'constipated' to
handle flow control from each DLCI. The later is unrelated to this patch.
The gsm_mux field is correctly set for Fcon/Fcoff commands in
gsm_control_message(). However, the same is not true for XON/XOFF
characters in gsm1_receive().
Disable software flow control handling in the tty to allow explicit
handling by n_gsm.
Add the missing handling in advanced option mode for gsm_mux in
gsm1_receive() to comply with the standard.
This patch depends on the following commit:
Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling")
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
---
drivers/tty/n_gsm.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 570f0b8b7576..8652308c187f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -232,6 +232,7 @@ struct gsm_mux {
int initiator; /* Did we initiate connection */
bool dead; /* Has the mux been shut down */
struct gsm_dlci *dlci[NUM_DLCI];
+ int old_c_iflag; /* termios c_iflag value before attach */
bool constipated; /* Asked by remote to shut up */
spinlock_t tx_lock;
@@ -2022,6 +2023,16 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
{
+ /* handle XON/XOFF */
+ if ((c & ISO_IEC_646_MASK) == XON) {
+ gsm->constipated = true;
+ return;
+ } else if ((c & ISO_IEC_646_MASK) == XOFF) {
+ gsm->constipated = false;
+ /* Kick the link in case it is idling */
+ gsm_data_kick(gsm, NULL);
+ return;
+ }
if (c == GSM1_SOF) {
/* EOF is only valid in frame if we have got to the data state */
if (gsm->state == GSM_DATA) {
@@ -2449,6 +2460,9 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
int ret, i;
gsm->tty = tty_kref_get(tty);
+ /* Turn off tty XON/XOFF handling to handle it explicitly. */
+ gsm->old_c_iflag = tty->termios.c_iflag;
+ tty->termios.c_iflag &= (IXON | IXOFF);
ret = gsm_activate_mux(gsm);
if (ret != 0)
tty_kref_put(gsm->tty);
@@ -2489,6 +2503,8 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
WARN_ON(tty != gsm->tty);
for (i = 1; i < NUM_DLCI; i++)
tty_unregister_device(gsm_tty_driver, base + i);
+ /* Restore tty XON/XOFF handling. */
+ gsm->tty->termios.c_iflag = gsm->old_c_iflag;
tty_kref_put(gsm->tty);
gsm->tty = NULL;
}
--
2.25.1
prev parent reply other threads:[~2022-04-22 7:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 7:10 [PATCH 1/3] tty: n_gsm: fix broken virtual tty handling D. Starke
2022-04-22 7:10 ` [PATCH 2/3] tty: n_gsm: fix invalid use of MSC in advanced option D. Starke
2022-04-22 7:10 ` D. Starke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422071025.5490-3-daniel.starke@siemens.com \
--to=daniel.starke@siemens.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®