[PATCH v2] usb/peak_usb: cleanup code

[Bernard Zhao <zhaojunkui2008@126.com>]

The variable fi and bi only used in branch if (!dev->prev_siblings)
, fi & bi not kmalloc in else branch, so move kfree into branch
if (!dev->prev_siblings),this change is to cleanup the code a bit.

Signed-off-by: Bernard Zhao <zhaojunkui2008@126.com>

---
Changes since V1:
* move all the content of the if (!dev->prev_siblings) to a new
function.
---
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 57 +++++++++++++--------
 1 file changed, 36 insertions(+), 21 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index ebe087f258e3..5e472fe086a8 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -841,32 +841,28 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev)
 	return 0;
 }
 
-/*
- * called when probing to initialize a device object.
- */
-static int pcan_usb_pro_init(struct peak_usb_device *dev)
+static int pcan_usb_pro_init_first_channel(struct peak_usb_device *dev, struct pcan_usb_pro_interface **usb_if)
 {
-	struct pcan_usb_pro_device *pdev =
-			container_of(dev, struct pcan_usb_pro_device, dev);
-	struct pcan_usb_pro_interface *usb_if = NULL;
-	struct pcan_usb_pro_fwinfo *fi = NULL;
-	struct pcan_usb_pro_blinfo *bi = NULL;
+	struct pcan_usb_pro_interface *pusb_if = NULL;
 	int err;
 
 	/* do this for 1st channel only */
 	if (!dev->prev_siblings) {
+		struct pcan_usb_pro_fwinfo *fi = NULL;
+		struct pcan_usb_pro_blinfo *bi = NULL;
+
 		/* allocate netdevices common structure attached to first one */
-		usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface),
+		pusb_if = kzalloc(sizeof(struct pcan_usb_pro_interface),
 				 GFP_KERNEL);
 		fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL);
 		bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL);
-		if (!usb_if || !fi || !bi) {
+		if (!pusb_if || !fi || !bi) {
 			err = -ENOMEM;
 			goto err_out;
 		}
 
 		/* number of ts msgs to ignore before taking one into account */
-		usb_if->cm_ignore_count = 5;
+		pusb_if->cm_ignore_count = 5;
 
 		/*
 		 * explicit use of dev_xxx() instead of netdev_xxx() here:
@@ -903,18 +899,14 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
 		     pcan_usb_pro.name,
 		     bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo,
 		     pcan_usb_pro.ctrl_count);
+
+		kfree(bi);
+		kfree(fi);
 	} else {
-		usb_if = pcan_usb_pro_dev_if(dev->prev_siblings);
+		pusb_if = pcan_usb_pro_dev_if(dev->prev_siblings);
 	}
 
-	pdev->usb_if = usb_if;
-	usb_if->dev[dev->ctrl_idx] = dev;
-
-	/* set LED in default state (end of init phase) */
-	pcan_usb_pro_set_led(dev, PCAN_USBPRO_LED_DEVICE, 1);
-
-	kfree(bi);
-	kfree(fi);
+	*usb_if = pusb_if;
 
 	return 0;
 
@@ -926,6 +918,29 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
 	return err;
 }
 
+/*
+ * called when probing to initialize a device object.
+ */
+static int pcan_usb_pro_init(struct peak_usb_device *dev)
+{
+	struct pcan_usb_pro_device *pdev =
+			container_of(dev, struct pcan_usb_pro_device, dev);
+	struct pcan_usb_pro_interface *usb_if = NULL;
+	int err;
+
+	err = pcan_usb_pro_init_first_channel(dev, &usb_if);
+	if (err)
+		return err;
+
+	pdev->usb_if = usb_if;
+	usb_if->dev[dev->ctrl_idx] = dev;
+
+	/* set LED in default state (end of init phase) */
+	pcan_usb_pro_set_led(dev, PCAN_USBPRO_LED_DEVICE, 1);
+
+	return 0;
+}
+
 static void pcan_usb_pro_exit(struct peak_usb_device *dev)
 {
 	struct pcan_usb_pro_device *pdev =
-- 
2.33.1