mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jue Wang <juew@google.com>
Subject: [PATCH 2/3] KVM: x86: Use explicit case-statements for MCx banks in {g,s}et_msr_mce()
Date: Thu, 12 May 2022 22:27:15 +0000	[thread overview]
Message-ID: <20220512222716.4112548-3-seanjc@google.com> (raw)
In-Reply-To: <20220512222716.4112548-1-seanjc@google.com>

Use an explicit case statement to grab the full range of MCx bank MSRs
in {g,s}et_msr_mce(), and manually check only the "end" (the number of
banks configured by userspace may be less than the max).  The "default"
trick works, but is a bit odd now, and will be quite odd if/when support
for accessing MCx_CTL2 MSRs is added, which has near identical logic.

Hoist "offset" to function scope so as to avoid curly braces for the case
statement, and because MCx_CTL2 support will need the same variables.

Opportunstically clean up the comment about allowing bit 10 to be cleared
from bank 4.

No functional change intended.

Cc: Jue Wang <juew@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/x86.c | 71 ++++++++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 34 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index bc6db58975dc..7e685ea9882b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3206,6 +3206,7 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	unsigned bank_num = mcg_cap & 0xff;
 	u32 msr = msr_info->index;
 	u64 data = msr_info->data;
+	u32 offset, last_msr;
 
 	switch (msr) {
 	case MSR_IA32_MCG_STATUS:
@@ -3219,32 +3220,33 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 		vcpu->arch.mcg_ctl = data;
 		break;
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MCx_CTL(KVM_MAX_MCE_BANKS) - 1:
+		last_msr = MSR_IA32_MCx_CTL(bank_num) - 1;
+		if (msr > last_msr)
+			return 1;
+
+		offset = array_index_nospec(msr - MSR_IA32_MC0_CTL,
+					    last_msr + 1 - MSR_IA32_MC0_CTL);
+
+		/*
+		 * Only 0 or all 1s can be written to IA32_MCi_CTL, all other
+		 * values are architecturally undefined.  But, some Linux
+		 * kernels clear bit 10 in bank 4 to workaround a BIOS/GART TLB
+		 * issue on AMD K8s, allow bit 10 to be clear when setting all
+		 * other bits in order to avoid an uncaught #GP in the guest.
+		 */
+		if ((offset & 0x3) == 0 &&
+		    data != 0 && (data | (1 << 10)) != ~(u64)0)
+			return 1;
+
+		/* MCi_STATUS */
+		if (!msr_info->host_initiated && (offset & 0x3) == 1 &&
+		    data != 0 && !can_set_mci_status(vcpu))
+			return 1;
+
+		vcpu->arch.mce_banks[offset] = data;
+		break;
 	default:
-		if (msr >= MSR_IA32_MC0_CTL &&
-		    msr < MSR_IA32_MCx_CTL(bank_num)) {
-			u32 offset = array_index_nospec(
-				msr - MSR_IA32_MC0_CTL,
-				MSR_IA32_MCx_CTL(bank_num) - MSR_IA32_MC0_CTL);
-
-			/* only 0 or all 1s can be written to IA32_MCi_CTL
-			 * some Linux kernels though clear bit 10 in bank 4 to
-			 * workaround a BIOS/GART TBL issue on AMD K8s, ignore
-			 * this to avoid an uncatched #GP in the guest
-			 */
-			if ((offset & 0x3) == 0 &&
-			    data != 0 && (data | (1 << 10)) != ~(u64)0)
-				return 1;
-
-			/* MCi_STATUS */
-			if (!msr_info->host_initiated &&
-			    (offset & 0x3) == 1 && data != 0) {
-				if (!can_set_mci_status(vcpu))
-					return 1;
-			}
-
-			vcpu->arch.mce_banks[offset] = data;
-			break;
-		}
 		return 1;
 	}
 	return 0;
@@ -3789,6 +3791,7 @@ static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host)
 	u64 data;
 	u64 mcg_cap = vcpu->arch.mcg_cap;
 	unsigned bank_num = mcg_cap & 0xff;
+	u32 offset, last_msr;
 
 	switch (msr) {
 	case MSR_IA32_P5_MC_ADDR:
@@ -3806,16 +3809,16 @@ static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host)
 	case MSR_IA32_MCG_STATUS:
 		data = vcpu->arch.mcg_status;
 		break;
-	default:
-		if (msr >= MSR_IA32_MC0_CTL &&
-		    msr < MSR_IA32_MCx_CTL(bank_num)) {
-			u32 offset = array_index_nospec(
-				msr - MSR_IA32_MC0_CTL,
-				MSR_IA32_MCx_CTL(bank_num) - MSR_IA32_MC0_CTL);
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MCx_CTL(KVM_MAX_MCE_BANKS) - 1:
+		last_msr = MSR_IA32_MCx_CTL(bank_num) - 1;
+		if (msr > last_msr)
+			return 1;
 
-			data = vcpu->arch.mce_banks[offset];
-			break;
-		}
+		offset = array_index_nospec(msr - MSR_IA32_MC0_CTL,
+					    last_msr + 1 - MSR_IA32_MC0_CTL);
+		data = vcpu->arch.mce_banks[offset];
+		break;
+	default:
 		return 1;
 	}
 	*pdata = data;
-- 
2.36.0.550.gb090851708-goog


  parent reply	other threads:[~2022-05-12 22:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-12 22:27 [PATCH 0/3] KVM: x86: WRMSR MCi_CTL/STATUS bug fix and cleanups Sean Christopherson
2022-05-12 22:27 ` [PATCH 1/3] KVM: x86: Signal #GP, not -EPERM, on bad WRMSR(MCi_CTL/STATUS) Sean Christopherson
2022-05-12 22:43   ` Jim Mattson
2022-05-12 22:27 ` Sean Christopherson [this message]
2022-05-12 23:23   ` [PATCH 2/3] KVM: x86: Use explicit case-statements for MCx banks in {g,s}et_msr_mce() Jim Mattson
2022-05-12 22:27 ` [PATCH 3/3] KVM: x86: Add helpers to identify CTL and STATUS MCi MSRs Sean Christopherson
2022-05-12 23:32   ` Jim Mattson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220512222716.4112548-3-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=juew@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®