Re: [PATCH] of/fdt: Ignore disabled memory nodes

[Rob Herring <robh@kernel.org>]

On Tue, May 17, 2022 at 11:14:10AM +0100, Andre Przywara wrote:
> When we boot a machine using a devicetree, the generic DT code goes
> through all nodes with a 'device_type = "memory"' property, and collects
> all memory banks mentioned there. However it does not check for the
> status property, so any nodes which are explicitly "disabled" will still
> be added as a memblock.
> This ends up badly for QEMU, when booting with secure firmware on
> arm/arm64 machines, because QEMU adds a node describing secure-only
> memory:
> ===================
> 	secram@e000000 {

BTW, 'memory' is the correct node name.

> 		secure-status = "okay";
> 		status = "disabled";
> 		reg = <0x00 0xe000000 0x00 0x1000000>;
> 		device_type = "memory";
> 	};
> ===================
> 
> The kernel will eventually use that memory block (which is located below
> the main DRAM bank), but accesses to that will be answered with an
> SError:
> ===================
> [    0.000000] Internal error: synchronous external abort: 96000050 [#1] PREEMPT SMP
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc6-00014-g10c8acb8b679 #524
> [    0.000000] Hardware name: linux,dummy-virt (DT)
> [    0.000000] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    0.000000] pc : new_slab+0x190/0x340
> [    0.000000] lr : new_slab+0x184/0x340
> [    0.000000] sp : ffff80000a4b3d10
> ....
> ==================
> The actual crash location and call stack will be somewhat random, and
> depend on the specific allocation of that physical memory range.
> 
> As the DT spec[1] explicitly mentions standard properties, add a simple
> check to skip over disabled memory nodes, so that we only use memory
> that is meant for non-secure code to use.
> 
> That fixes booting a QEMU arm64 VM with EL3 enabled ("secure=on"), when
> not using UEFI. In this case the QEMU generated DT will be handed on
> to the kernel, which will see the secram node.
> This issue is reproducible when using TF-A together with U-Boot as
> firmware, then booting with the "booti" command.
> 
> When using U-Boot as an UEFI provider, the code there [2] explicitly
> filters for disabled nodes when generating the UEFI memory map, so we
> are safe.
> EDK/2 only reads the first bank of the first DT memory node [3] to learn
> about memory, so we got lucky there.
> 
> [1] https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter3-devicenodes.rst#memory-node (after the table)
> [2] https://source.denx.de/u-boot/u-boot/-/blob/master/lib/fdtdec.c#L1061-1063
> [3] https://github.com/tianocore/edk2/blob/master/ArmVirtPkg/PrePi/FdtParser.c
> 
> Reported-by: Ross Burton <ross.burton@arm.com>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  drivers/of/fdt.c | 3 +++
>  1 file changed, 3 insertions(+)

Applied, thanks!