From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
dave.hansen@intel.com, luto@kernel.org, peterz@infradead.org
Cc: ak@linux.intel.com, dan.j.williams@intel.com, david@redhat.com,
hpa@zytor.com, linux-kernel@vger.kernel.org,
sathyanarayanan.kuppuswamy@linux.intel.com, seanjc@google.com,
thomas.lendacky@amd.com, x86@kernel.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [PATCHv2 2/3] x86/tdx: Clarify RIP adjustments in #VE handler
Date: Fri, 20 May 2022 06:13:15 +0300 [thread overview]
Message-ID: <20220520031316.47722-3-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20220520031316.47722-1-kirill.shutemov@linux.intel.com>
After successful #VE handling, tdx_handle_virt_exception() has to move
RIP to the next instruction. The handler needs to know the length of the
instruction.
If the #VE happened due to instruction execution, GET_VEINFO TDX module
call provides info on the instruction in R10, including its length.
For #VE due to EPT violation, info in R10 is not usable and kernel has
to decode instruction manually to find out its length.
Restructure the code to make it explicit that the instruction length
depends on the type of #VE. Handler of an exit reason returns
instruction length on success or -errno on failure.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
arch/x86/coco/tdx/tdx.c | 150 +++++++++++++++++++++++++---------------
1 file changed, 93 insertions(+), 57 deletions(-)
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index faae53f8d559..010dc229096a 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -147,7 +147,7 @@ static u64 __cpuidle __halt(const bool irq_disabled, const bool do_sti)
return __tdx_hypercall(&args, do_sti ? TDX_HCALL_ISSUE_STI : 0);
}
-static bool handle_halt(void)
+static int handle_halt(struct ve_info *ve)
{
/*
* Since non safe halt is mainly used in CPU offlining
@@ -158,9 +158,9 @@ static bool handle_halt(void)
const bool do_sti = false;
if (__halt(irq_disabled, do_sti))
- return false;
+ return -EIO;
- return true;
+ return ve->instr_len;
}
void __cpuidle tdx_safe_halt(void)
@@ -180,7 +180,7 @@ void __cpuidle tdx_safe_halt(void)
WARN_ONCE(1, "HLT instruction emulation failed\n");
}
-static bool read_msr(struct pt_regs *regs)
+static int read_msr(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -194,14 +194,14 @@ static bool read_msr(struct pt_regs *regs)
* (GHCI), section titled "TDG.VP.VMCALL<Instruction.RDMSR>".
*/
if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
- return false;
+ return -EIO;
regs->ax = lower_32_bits(args.r11);
regs->dx = upper_32_bits(args.r11);
- return true;
+ return ve->instr_len;
}
-static bool write_msr(struct pt_regs *regs)
+static int write_msr(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -215,10 +215,13 @@ static bool write_msr(struct pt_regs *regs)
* can be found in TDX Guest-Host-Communication Interface
* (GHCI) section titled "TDG.VP.VMCALL<Instruction.WRMSR>".
*/
- return !__tdx_hypercall(&args, 0);
+ if (__tdx_hypercall(&args, 0))
+ return -EIO;
+
+ return ve->instr_len;
}
-static bool handle_cpuid(struct pt_regs *regs)
+static int handle_cpuid(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -236,7 +239,7 @@ static bool handle_cpuid(struct pt_regs *regs)
*/
if (regs->ax < 0x40000000 || regs->ax > 0x4FFFFFFF) {
regs->ax = regs->bx = regs->cx = regs->dx = 0;
- return true;
+ return ve->instr_len;
}
/*
@@ -245,7 +248,7 @@ static bool handle_cpuid(struct pt_regs *regs)
* (GHCI), section titled "VP.VMCALL<Instruction.CPUID>".
*/
if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
- return false;
+ return -EIO;
/*
* As per TDX GHCI CPUID ABI, r12-r15 registers contain contents of
@@ -257,7 +260,7 @@ static bool handle_cpuid(struct pt_regs *regs)
regs->cx = args.r14;
regs->dx = args.r15;
- return true;
+ return ve->instr_len;
}
static bool mmio_read(int size, unsigned long addr, unsigned long *val)
@@ -283,7 +286,7 @@ static bool mmio_write(int size, unsigned long addr, unsigned long val)
EPT_WRITE, addr, val);
}
-static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
+static int handle_mmio(struct pt_regs *regs, struct ve_info *ve)
{
char buffer[MAX_INSN_SIZE];
unsigned long *reg, val;
@@ -294,34 +297,36 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
/* Only in-kernel MMIO is supported */
if (WARN_ON_ONCE(user_mode(regs)))
- return false;
+ return -EFAULT;
if (copy_from_kernel_nofault(buffer, (void *)regs->ip, MAX_INSN_SIZE))
- return false;
+ return -EFAULT;
if (insn_decode(&insn, buffer, MAX_INSN_SIZE, INSN_MODE_64))
- return false;
+ return -EINVAL;
mmio = insn_decode_mmio(&insn, &size);
if (WARN_ON_ONCE(mmio == MMIO_DECODE_FAILED))
- return false;
+ return -EINVAL;
if (mmio != MMIO_WRITE_IMM && mmio != MMIO_MOVS) {
reg = insn_get_modrm_reg_ptr(&insn, regs);
if (!reg)
- return false;
+ return -EINVAL;
}
- ve->instr_len = insn.length;
-
/* Handle writes first */
switch (mmio) {
case MMIO_WRITE:
memcpy(&val, reg, size);
- return mmio_write(size, ve->gpa, val);
+ if (!mmio_write(size, ve->gpa, val))
+ return -EIO;
+ return insn.length;
case MMIO_WRITE_IMM:
val = insn.immediate.value;
- return mmio_write(size, ve->gpa, val);
+ if (!mmio_write(size, ve->gpa, val))
+ return -EIO;
+ return insn.length;
case MMIO_READ:
case MMIO_READ_ZERO_EXTEND:
case MMIO_READ_SIGN_EXTEND:
@@ -334,15 +339,15 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
* decoded or handled properly. It was likely not using io.h
* helpers or accessed MMIO accidentally.
*/
- return false;
+ return -EINVAL;
default:
WARN_ONCE(1, "Unknown insn_decode_mmio() decode value?");
- return false;
+ return -EINVAL;
}
/* Handle reads */
if (!mmio_read(size, ve->gpa, &val))
- return false;
+ return -EIO;
switch (mmio) {
case MMIO_READ:
@@ -364,13 +369,13 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
default:
/* All other cases has to be covered with the first switch() */
WARN_ON_ONCE(1);
- return false;
+ return -EINVAL;
}
if (extend_size)
memset(reg, extend_val, extend_size);
memcpy(reg, &val, size);
- return true;
+ return insn.length;
}
static bool handle_in(struct pt_regs *regs, int size, int port)
@@ -421,13 +426,14 @@ static bool handle_out(struct pt_regs *regs, int size, int port)
*
* Return True on success or False on failure.
*/
-static bool handle_io(struct pt_regs *regs, u32 exit_qual)
+static int handle_io(struct pt_regs *regs, struct ve_info *ve)
{
+ u32 exit_qual = ve->exit_qual;
int size, port;
- bool in;
+ bool in, ret;
if (VE_IS_IO_STRING(exit_qual))
- return false;
+ return -EIO;
in = VE_IS_IO_IN(exit_qual);
size = VE_GET_IO_SIZE(exit_qual);
@@ -435,9 +441,13 @@ static bool handle_io(struct pt_regs *regs, u32 exit_qual)
if (in)
- return handle_in(regs, size, port);
+ ret = handle_in(regs, size, port);
else
- return handle_out(regs, size, port);
+ ret = handle_out(regs, size, port);
+ if (!ret)
+ return -EIO;
+
+ return ve->instr_len;
}
/*
@@ -447,17 +457,19 @@ static bool handle_io(struct pt_regs *regs, u32 exit_qual)
__init bool tdx_early_handle_ve(struct pt_regs *regs)
{
struct ve_info ve;
- bool ret;
+ int insn_len;
tdx_get_ve_info(&ve);
if (ve.exit_reason != EXIT_REASON_IO_INSTRUCTION)
return false;
- ret = handle_io(regs, ve.exit_qual);
- if (ret)
- regs->ip += ve.instr_len;
- return ret;
+ insn_len = handle_io(regs, &ve);
+ if (insn_len < 0)
+ return false;
+
+ regs->ip += insn_len;
+ return true;
}
void tdx_get_ve_info(struct ve_info *ve)
@@ -486,58 +498,82 @@ void tdx_get_ve_info(struct ve_info *ve)
ve->exit_qual = out.rdx;
ve->gla = out.r8;
ve->gpa = out.r9;
- ve->instr_len = lower_32_bits(out.r10);
- ve->instr_info = upper_32_bits(out.r10);
+
+ /*
+ * If the #VE happened due to instruction execution, GET_VEINFO
+ * provides info on the instruction in out.r10.
+ *
+ * For #VE due to EPT violation, info in out.r10 is not usable and
+ * kernel has to decode instruction manually to find out its length.
+ */
+ if (ve->exit_reason != EXIT_REASON_EPT_VIOLATION) {
+ ve->instr_len = lower_32_bits(out.r10);
+ ve->instr_info = upper_32_bits(out.r10);
+ } else {
+ ve->instr_len = 0;
+ ve->instr_info = 0;
+ }
}
-/* Handle the user initiated #VE */
-static bool virt_exception_user(struct pt_regs *regs, struct ve_info *ve)
+/*
+ * Handle the user initiated #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_user(struct pt_regs *regs, struct ve_info *ve)
{
switch (ve->exit_reason) {
case EXIT_REASON_CPUID:
- return handle_cpuid(regs);
+ return handle_cpuid(regs, ve);
default:
pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
- return false;
+ return -EIO;
}
}
-/* Handle the kernel #VE */
-static bool virt_exception_kernel(struct pt_regs *regs, struct ve_info *ve)
+/*
+ * Handle the kernel #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_kernel(struct pt_regs *regs, struct ve_info *ve)
{
switch (ve->exit_reason) {
case EXIT_REASON_HLT:
- return handle_halt();
+ return handle_halt(ve);
case EXIT_REASON_MSR_READ:
- return read_msr(regs);
+ return read_msr(regs, ve);
case EXIT_REASON_MSR_WRITE:
- return write_msr(regs);
+ return write_msr(regs, ve);
case EXIT_REASON_CPUID:
- return handle_cpuid(regs);
+ return handle_cpuid(regs, ve);
case EXIT_REASON_EPT_VIOLATION:
return handle_mmio(regs, ve);
case EXIT_REASON_IO_INSTRUCTION:
- return handle_io(regs, ve->exit_qual);
+ return handle_io(regs, ve);
default:
pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
- return false;
+ return -EIO;
}
}
bool tdx_handle_virt_exception(struct pt_regs *regs, struct ve_info *ve)
{
- bool ret;
+ int insn_len;
if (user_mode(regs))
- ret = virt_exception_user(regs, ve);
+ insn_len = virt_exception_user(regs, ve);
else
- ret = virt_exception_kernel(regs, ve);
+ insn_len = virt_exception_kernel(regs, ve);
+ if (insn_len < 0)
+ return false;
/* After successful #VE handling, move the IP */
- if (ret)
- regs->ip += ve->instr_len;
+ regs->ip += insn_len;
- return ret;
+ return true;
}
static bool tdx_tlb_flush_required(bool private)
--
2.35.1
next prev parent reply other threads:[~2022-05-20 3:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-20 3:13 [PATCHv2 0/3] Fix for load_unaligned_zeropad() in TDX guest Kirill A. Shutemov
2022-05-20 3:13 ` [PATCHv2 1/3] x86/tdx: Fix early #VE handling Kirill A. Shutemov
2022-05-20 17:01 ` Sean Christopherson
2022-05-20 17:33 ` Sean Christopherson
2022-05-20 17:46 ` Sathyanarayanan Kuppuswamy
2022-05-20 3:13 ` Kirill A. Shutemov [this message]
2022-05-20 17:52 ` [PATCHv2 2/3] x86/tdx: Clarify RIP adjustments in #VE handler Dave Hansen
2022-05-20 18:01 ` Sean Christopherson
2022-05-20 3:13 ` [PATCHv2 3/3] x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page Kirill A. Shutemov
2022-05-20 17:47 ` Sean Christopherson
2022-05-20 18:43 ` Kirill A. Shutemov
2022-05-20 19:00 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220520031316.47722-3-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=ak@linux.intel.com \
--cc=bp@alien8.de \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=david@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome