[PATCH v2 2/3] iio: adc: exynos-adc: Add support for ADC FSD-HW controller

[Tamseel Shams <m.shams@samsung.com>]

From: Alim Akhtar <alim.akhtar@samsung.com>

Exynos's ADC-FSD-HW has some difference in registers set, number of
programmable channels (16 channel) etc. This patch adds support for
ADC-FSD-HW controller version.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
---
- Changes since v1
* Addressed Jonathan's comment by using already provided isr handle

 drivers/iio/adc/exynos_adc.c | 55 ++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index cff1ba57fb16..183ae591327a 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -55,6 +55,11 @@
 #define ADC_V2_INT_ST(x)	((x) + 0x14)
 #define ADC_V2_VER(x)		((x) + 0x20)
 
+/* ADC_FSD_HW register definitions */
+#define ADC_FSD_DAT(x)			((x) + 0x08)
+#define ADC_FSD_DAT_SUM(x)		((x) + 0x0C)
+#define ADC_FSD_DBG_DATA(x)		((x) + 0x1C)
+
 /* Bit definitions for ADC_V1 */
 #define ADC_V1_CON_RES		(1u << 16)
 #define ADC_V1_CON_PRSCEN	(1u << 14)
@@ -92,6 +97,7 @@
 
 /* Bit definitions for ADC_V2 */
 #define ADC_V2_CON1_SOFT_RESET	(1u << 2)
+#define ADC_V2_CON1_SOFT_NON_RESET	(1u << 1)
 
 #define ADC_V2_CON2_OSEL	(1u << 10)
 #define ADC_V2_CON2_ESEL	(1u << 9)
@@ -100,6 +106,7 @@
 #define ADC_V2_CON2_ACH_SEL(x)	(((x) & 0xF) << 0)
 #define ADC_V2_CON2_ACH_MASK	0xF
 
+#define MAX_ADC_FSD_CHANNELS		16
 #define MAX_ADC_V2_CHANNELS		10
 #define MAX_ADC_V1_CHANNELS		8
 #define MAX_EXYNOS3250_ADC_CHANNELS	2
@@ -484,6 +491,43 @@ static const struct exynos_adc_data exynos7_adc_data = {
 	.start_conv	= exynos_adc_v2_start_conv,
 };
 
+static void exynos_adc_fsd_init_hw(struct exynos_adc *info)
+{
+	u32 con2;
+
+	writel(ADC_V2_CON1_SOFT_RESET, ADC_V2_CON1(info->regs));
+
+	writel(ADC_V2_CON1_SOFT_NON_RESET, ADC_V2_CON1(info->regs));
+
+	con2 = ADC_V2_CON2_C_TIME(6);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	/* Enable interrupts */
+	writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static void exynos_adc_fsd_exit_hw(struct exynos_adc *info)
+{
+	u32 con2;
+
+	con2 = readl(ADC_V2_CON2(info->regs));
+	con2 &= ~ADC_V2_CON2_C_TIME(7);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	/* Disable interrupts */
+	writel(0, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data fsd_hw_adc_data = {
+	.num_channels	= MAX_ADC_FSD_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_fsd_init_hw,
+	.exit_hw	= exynos_adc_fsd_exit_hw,
+	.clear_irq	= exynos_adc_v2_clear_irq,
+	.start_conv	= exynos_adc_v2_start_conv,
+};
+
 static const struct of_device_id exynos_adc_match[] = {
 	{
 		.compatible = "samsung,s3c2410-adc",
@@ -518,6 +562,9 @@ static const struct of_device_id exynos_adc_match[] = {
 	}, {
 		.compatible = "samsung,exynos7-adc",
 		.data = &exynos7_adc_data,
+	}, {
+		.compatible = "samsung,exynos-adc-fsd-hw",
+		.data = &fsd_hw_adc_data,
 	},
 	{},
 };
@@ -626,6 +673,8 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 		info->ts_x = readl(ADC_V1_DATX(info->regs));
 		info->ts_y = readl(ADC_V1_DATY(info->regs));
 		writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+	} else if (of_device_is_compatible(info->dev->of_node, "samsung,exynos-adc-fsd-hw")) {
+		info->value = readl(ADC_FSD_DAT(info->regs)) & mask;
 	} else {
 		info->value = readl(ADC_V1_DATX(info->regs)) & mask;
 	}
@@ -719,6 +768,12 @@ static const struct iio_chan_spec exynos_adc_iio_channels[] = {
 	ADC_CHANNEL(7, "adc7"),
 	ADC_CHANNEL(8, "adc8"),
 	ADC_CHANNEL(9, "adc9"),
+	ADC_CHANNEL(10, "adc10"),
+	ADC_CHANNEL(11, "adc11"),
+	ADC_CHANNEL(12, "adc12"),
+	ADC_CHANNEL(13, "adc13"),
+	ADC_CHANNEL(14, "adc14"),
+	ADC_CHANNEL(15, "adc15"),
 };
 
 static int exynos_adc_remove_devices(struct device *dev, void *c)
-- 
2.17.1