From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Mark Brown <broonie@kernel.org>, <alsa-devel@alsa-project.org>,
<patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: Re: [PATCH v4 02/17] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly
Date: Thu, 26 May 2022 09:36:58 +0000 [thread overview]
Message-ID: <20220526093658.GQ38351@ediswmail.ad.cirrus.com> (raw)
In-Reply-To: <20220525131638.5512-3-vitalyr@opensource.cirrus.com>
On Wed, May 25, 2022 at 02:16:23PM +0100, Vitaly Rodionov wrote:
> From: Stefan Binding <sbinding@opensource.cirrus.com>
>
> DSP controls are exposed as ALSA controls, however,
> some of these controls are required to be accessed by
> the driver. Add apis which allow read/write of these
> controls. The write api will also notify the ALSA control
> on value change.
>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
> ---
>
> Changes since v2:
> - No change
>
> sound/pci/hda/hda_cs_dsp_ctl.c | 52 ++++++++++++++++++++++++++++++++++
> sound/pci/hda/hda_cs_dsp_ctl.h | 4 +++
> 2 files changed, 56 insertions(+)
>
> diff --git a/sound/pci/hda/hda_cs_dsp_ctl.c b/sound/pci/hda/hda_cs_dsp_ctl.c
> index 46df48ff2ae1..3b837d000a00 100644
> --- a/sound/pci/hda/hda_cs_dsp_ctl.c
> +++ b/sound/pci/hda/hda_cs_dsp_ctl.c
> @@ -237,6 +237,58 @@ void hda_cs_dsp_control_remove(struct cs_dsp_coeff_ctl *cs_ctl)
> }
> EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_control_remove, SND_HDA_CS_DSP_CONTROLS);
>
> +int hda_cs_dsp_write_ctl(struct cs_dsp *dsp, const char *name, int type,
> + unsigned int alg, void *buf, size_t len)
> +{
> + struct cs_dsp_coeff_ctl *cs_ctl;
> + struct hda_cs_dsp_coeff_ctl *ctl;
> + struct snd_kcontrol *kctl;
> + int ret;
> +
> + cs_ctl = cs_dsp_get_ctl(dsp, name, type, alg);
> + if (!cs_ctl)
> + return -EINVAL;
> +
> + ctl = cs_ctl->priv;
> +
> + if (len > cs_ctl->len)
> + return -EINVAL;
Is it just me or are these length check unnecessary? I realise
they are also in the wm_adsp code you are copying, but it looks
to me like they are redundant in both cases, cs_dsp_coeff_*_ctrl
appears to do a length check itself.
> +
> + ret = cs_dsp_coeff_write_ctrl(cs_ctl, 0, buf, len);
> + if (ret)
> + return ret;
> +
> + if (cs_ctl->flags & WMFW_CTL_FLAG_SYS)
> + return 0;
> +
> + list_for_each_entry(kctl, &ctl->card->controls, list)
> + if (!strncmp(kctl->id.name, ctl->name, sizeof(kctl->id.name))) {
> + snd_ctl_notify(ctl->card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id);
> + return 0;
> + }
> +
> + dev_warn(dsp->dev, "Cannot find Control for %s\n", name);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_write_ctl, SND_HDA_CS_DSP_CONTROLS);
> +
> +int hda_cs_dsp_read_ctl(struct cs_dsp *dsp, const char *name, int type,
> + unsigned int alg, void *buf, size_t len)
> +{
> + struct cs_dsp_coeff_ctl *cs_ctl;
> +
> + cs_ctl = cs_dsp_get_ctl(dsp, name, type, alg);
> + if (!cs_ctl)
> + return -EINVAL;
> +
> + if (len > cs_ctl->len)
> + return -EINVAL;
ditto.
Thanks,
Charles
next prev parent reply other threads:[~2022-05-26 9:37 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 13:16 [PATCH v4 00/17] ALSA: hda: cirrus: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 01/17] ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls Vitaly Rodionov
2022-05-26 9:30 ` Charles Keepax
2022-05-25 13:16 ` [PATCH v4 02/17] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly Vitaly Rodionov
2022-05-26 9:36 ` Charles Keepax [this message]
2022-05-25 13:16 ` [PATCH v4 03/17] ALSA: hda: cs35l41: Save codec object inside component struct Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 04/17] ALSA: hda: cs35l41: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 05/17] ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 06/17] ALSA: hda: cs35l41: Support reading subsystem id from ACPI Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 07/17] ALSA: hda: cs35l41: Support multiple load paths for firmware Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 08/17] ALSA: hda: cs35l41: Support Speaker ID for laptops Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 09/17] ASoC: cs35l41: Move cs35l41 exit hibernate function into shared code Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 10/17] ASoC: cs35l41: Do not print error when waking from hibernation Vitaly Rodionov
2022-05-26 9:08 ` Charles Keepax
2022-05-25 13:16 ` [PATCH v4 11/17] ASoC: cs35l41: Add common cs35l41 enter hibernate function Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 12/17] ALSA: hda: cs35l41: Support Hibernation during Suspend Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 13/17] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 14/17] ALSA: hda: hda_cs_dsp_ctl: Add fw id strings Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 15/17] ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence Vitaly Rodionov
2022-05-25 13:16 ` [PATCH v4 16/17] ALSA: hda: cs35l41: Support Firmware switching and reloading Vitaly Rodionov
2022-05-30 11:31 ` Jaroslav Kysela
2022-05-25 13:16 ` [PATCH v4 17/17] ALSA: hda: cs35l41: Add module parameter to control firmware load Vitaly Rodionov
2022-05-27 16:13 ` [PATCH v4 00/17] ALSA: hda: cirrus: Add initial DSP support and firmware loading Takashi Iwai
2022-05-30 9:08 ` Charles Keepax
2022-05-30 9:18 ` Takashi Iwai
2022-05-30 9:36 ` Charles Keepax
2022-05-30 10:14 ` Takashi Iwai
2022-05-30 10:34 ` Charles Keepax
2022-05-30 10:45 ` Takashi Iwai
2022-05-30 10:53 ` Charles Keepax
2022-05-30 11:07 ` Takashi Iwai
2022-05-30 11:40 ` Jaroslav Kysela
2022-06-01 16:43 ` Richard Fitzgerald
2022-06-01 19:13 ` Takashi Iwai
2022-06-07 10:55 ` (subset) " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220526093658.GQ38351@ediswmail.ad.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
--cc=vitalyr@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®