mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Baokun Li <libaokun1@huawei.com>
To: <linux-ext4@vger.kernel.org>
Cc: <tytso@mit.edu>, <adilger.kernel@dilger.ca>, <jack@suse.cz>,
	<ritesh.list@gmail.com>, <lczerner@redhat.com>,
	<linux-kernel@vger.kernel.org>, <yi.zhang@huawei.com>,
	<yebin10@huawei.com>, <yukuai3@huawei.com>,
	<libaokun1@huawei.com>, Hulk Robot <hulkci@huawei.com>
Subject: [PATCH v3 1/3] ext4: fix bug_on ext4_mb_use_inode_pa
Date: Sat, 28 May 2022 19:00:15 +0800	[thread overview]
Message-ID: <20220528110017.354175-2-libaokun1@huawei.com> (raw)
In-Reply-To: <20220528110017.354175-1-libaokun1@huawei.com>

Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
	`fallocate -l100M disk`
	`mkfs.ext4 -b 1024 -g 256 disk`
	`mount disk /mnt`
	`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
---
V1->V2:
	Replace round_down() with rounddown().
	Modified comments.
V2->V3:
	Convert EXT4_BLOCKS_PER_GROUP type to ext4_lblk_t
	to avoid compilation warnings.

 fs/ext4/mballoc.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9f12f29bc346..4d3740fdff90 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4104,6 +4104,15 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	size = size >> bsbits;
 	start = start_off >> bsbits;
 
+	/*
+	 * For tiny groups (smaller than 8MB) the chosen allocation
+	 * alignment may be larger than group size. Make sure the
+	 * alignment does not move allocation to a different group which
+	 * makes mballoc fail assertions later.
+	 */
+	start = max(start, rounddown(ac->ac_o_ex.fe_logical,
+			(ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb)));
+
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
 		size -= ar->lleft + 1 - start;
-- 
2.31.1


  reply	other threads:[~2022-05-28 10:47 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-28 11:00 [PATCH v3 0/3] ext4: fix two bugs in ext4_mb_normalize_request Baokun Li
2022-05-28 11:00 ` Baokun Li [this message]
2022-05-28 15:10   ` [PATCH v3 1/3] ext4: fix bug_on ext4_mb_use_inode_pa Ritesh Harjani
2022-05-30  2:12     ` Baokun Li
2022-05-28 11:00 ` [PATCH v3 2/3] ext4: correct the judgment of BUG in ext4_mb_normalize_request Baokun Li
2022-05-28 15:12   ` Ritesh Harjani
2022-05-30  2:13     ` Baokun Li
2022-05-28 11:00 ` [PATCH v3 3/3] ext4: support flex_bg " Baokun Li
2022-05-28 15:09   ` Ritesh Harjani
2022-05-30  2:35     ` Baokun Li
2022-06-18  2:12 ` [PATCH v3 0/3] ext4: fix two bugs " Theodore Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220528110017.354175-2-libaokun1@huawei.com \
    --to=libaokun1@huawei.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=hulkci@huawei.com \
    --cc=jack@suse.cz \
    --cc=lczerner@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ritesh.list@gmail.com \
    --cc=tytso@mit.edu \
    --cc=yebin10@huawei.com \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®