[PATCH v2 2/3] dt-bindings: net: cavium-mdio.txt: add clock-frequency attribute

[Piyush Malgujar <pmalgujar@marvell.com>]

Add support to configure MDIO clock frequency via DTS

Signed-off-by: Damian Eppel <deppel@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
---
 Documentation/devicetree/bindings/net/cavium-mdio.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
index 020df08b8a30f4df80766bb90e100ae6210a777b..638c341966a80823b9eb2f33b947f38110907cc1 100644
--- a/Documentation/devicetree/bindings/net/cavium-mdio.txt
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -41,6 +41,9 @@ Properties:
 
 - reg: The PCI device and function numbers of the nexus device.
 
+- clock-frequency: MDIO bus clock frequency in Hz. It defaults to 3.125 MHz and
+		   and not to standard 2.5 MHz for Marvell Octeon family.
+
 - #address-cells: Must be <2>.
 
 - #size-cells: Must be <2>.
@@ -64,6 +67,7 @@ Example:
                         #address-cells = <1>;
                         #size-cells = <0>;
                         reg = <0x87e0 0x05003800 0x0 0x30>;
+                        clock-frequency = <3125000>;
 
                         ethernet-phy@0 {
                                 ...
@@ -75,6 +79,7 @@ Example:
                         #address-cells = <1>;
                         #size-cells = <0>;
                         reg = <0x87e0 0x05003880 0x0 0x30>;
+                        clock-frequency = <3125000>;
 
                         ethernet-phy@0 {
                                 ...
-- 
2.17.1