mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: William Zhang <william.zhang@broadcom.com>
To: Linux ARM List <linux-arm-kernel@lists.infradead.org>
Cc: joel.peshkin@broadcom.com, anand.gore@broadcom.com,
	Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>,
	kursad.oney@broadcom.com, florian.fainelli@broadcom.com,
	William Zhang <william.zhang@broadcom.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: update bcm47622 dts file
Date: Wed,  1 Jun 2022 16:36:06 -0700	[thread overview]
Message-ID: <20220601233606.23281-1-william.zhang@broadcom.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 1944 bytes --]

Fix a few issue in bcm47622.dtsi file:
- Remove unnecessary cpu_on and cpu_off properties from psci node
- Add the missing gic registers and interrupts property to gic node
- Cosmetic changes

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

 arch/arm/boot/dts/bcm47622.dtsi | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
index c016e12b7372..2df04528af82 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -32,6 +32,7 @@ CA7_1: cpu@1 {
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		CA7_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -39,6 +40,7 @@ CA7_2: cpu@2 {
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		CA7_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -46,6 +48,7 @@ CA7_3: cpu@3 {
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		L2_0: l2-cache0 {
 			compatible = "cache";
 		};
@@ -76,6 +79,7 @@ periph_clk: periph-clk {
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -88,23 +92,23 @@ uart_clk: uart-clk {
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
-		cpu_off = <1>;
-		cpu_on = <2>;
 	};
 
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x81000000 0x818000>;
+		ranges = <0 0x81000000 0x8000>;
 
 		gic: interrupt-controller@1000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
 			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>;
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
 		};
 	};
 
-- 
2.36.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

             reply	other threads:[~2022-06-01 23:36 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-01 23:36 William Zhang [this message]
2022-06-08  9:22 ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220601233606.23281-1-william.zhang@broadcom.com \
    --to=william.zhang@broadcom.com \
    --cc=anand.gore@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=joel.peshkin@broadcom.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kursad.oney@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®