mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To: linus.walleij@linaro.org, brgl@bgdev.pl, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, wens@csie.org,
	jic23@kernel.org, lee.jones@linaro.org, sre@kernel.org,
	broonie@kernel.org, gregkh@linuxfoundation.org,
	lgirdwood@gmail.com
Cc: lars@metafoo.de, rafael@kernel.org, quic_gurus@quicinc.com,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192
Date: Tue,  7 Jun 2022 16:53:24 +0100	[thread overview]
Message-ID: <20220607155324.118102-18-aidanmacdonald.0x0@gmail.com> (raw)
In-Reply-To: <20220607155324.118102-1-aidanmacdonald.0x0@gmail.com>

The AXP192 has a battery charger similar to other X-Powers PMICs,
but unlike the other supported devices, it does not have a fuel
gauge and can't report battery capacity directly.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
 drivers/power/supply/axp20x_battery.c | 49 +++++++++++++++++++++++++--
 1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index e9547e2d7c48..3fa2faa6f0f8 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -538,6 +538,19 @@ static int axp20x_battery_set_prop(struct power_supply *psy,
 	}
 }
 
+static enum power_supply_property axp192_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+};
+
 static enum power_supply_property axp20x_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
@@ -562,6 +575,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy,
 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
 }
 
+static const struct power_supply_desc axp192_batt_ps_desc = {
+	.name = "axp192-battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = axp192_battery_props,
+	.num_properties = ARRAY_SIZE(axp192_battery_props),
+	.property_is_writeable = axp20x_battery_prop_writeable,
+	.get_property = axp20x_battery_get_prop,
+	.set_property = axp20x_battery_set_prop,
+};
+
 static const struct power_supply_desc axp20x_batt_ps_desc = {
 	.name = "axp20x-battery",
 	.type = POWER_SUPPLY_TYPE_BATTERY,
@@ -572,6 +595,19 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
 	.set_property = axp20x_battery_set_prop,
 };
 
+static const int axp192_ccc_table[AXP20X_CHRG_CTRL1_TGT_CURR+1] = {
+	100000,  190000,  280000,  360000,
+	450000,  550000,  630000,  700000,
+	780000,  880000,  960000,  1000000,
+	1080000, 1160000, 1240000, 1320000,
+};
+
+static const struct axp_data axp192_data = {
+	.ccc_table = axp192_ccc_table,
+	.get_max_voltage = axp20x_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
 static const struct axp_data axp209_data = {
 	.ccc_scale = 100000,
 	.ccc_offset = 300000,
@@ -600,6 +636,9 @@ static const struct axp_data axp813_data = {
 
 static const struct of_device_id axp20x_battery_ps_id[] = {
 	{
+		.compatible = "x-powers,axp192-battery-power-supply",
+		.data = (void *)&axp192_data,
+	}, {
 		.compatible = "x-powers,axp209-battery-power-supply",
 		.data = (void *)&axp209_data,
 	}, {
@@ -617,6 +656,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
 	struct axp20x_batt_ps *axp20x_batt;
 	struct power_supply_config psy_cfg = {};
 	struct power_supply_battery_info *info;
+	const struct power_supply_desc *ps_desc;
 	struct device *dev = &pdev->dev;
 
 	if (!of_device_is_available(pdev->dev.of_node))
@@ -660,9 +700,12 @@ static int axp20x_power_probe(struct platform_device *pdev)
 
 	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
 
-	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
-						       &axp20x_batt_ps_desc,
-						       &psy_cfg);
+	if (!axp20x_batt->data->has_fg)
+		ps_desc = &axp192_batt_ps_desc;
+	else
+		ps_desc = &axp20x_batt_ps_desc;
+
+	axp20x_batt->batt = devm_power_supply_register(&pdev->dev, ps_desc, &psy_cfg);
 	if (IS_ERR(axp20x_batt->batt)) {
 		dev_err(&pdev->dev, "failed to register power supply: %ld\n",
 			PTR_ERR(axp20x_batt->batt));
-- 
2.35.1


  parent reply	other threads:[~2022-06-07 15:54 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-07 15:53 [PATCH v2 00/17] Add support for AXP192 PMIC Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 01/17] regmap-irq: Use sub_irq_reg() to calculate unmask register address Aidan MacDonald
2022-06-09 16:39   ` Guru Das Srinagesh
2022-06-11 14:32     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts Aidan MacDonald
2022-06-08 16:17   ` Mark Brown
2022-06-10 15:40     ` Aidan MacDonald
2022-06-10 16:47       ` Mark Brown
2022-06-11 14:22         ` Aidan MacDonald
2022-06-23  8:54       ` Matti Vaittinen
2022-06-23 20:35         ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 03/17] dt-bindings: mfd: add bindings for AXP192 MFD device Aidan MacDonald
2022-06-08 10:48   ` Krzysztof Kozlowski
2022-06-09 17:52     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 04/17] dt-bindings: iio: adc: axp209: Add AXP192 compatible Aidan MacDonald
2022-06-08 10:49   ` Krzysztof Kozlowski
2022-06-07 15:53 ` [PATCH v2 05/17] dt-bindings: power: supply: axp20x: " Aidan MacDonald
2022-06-08 10:50   ` Krzysztof Kozlowski
2022-06-07 15:53 ` [PATCH v2 06/17] dt-bindings: gpio: Add AXP192 GPIO bindings Aidan MacDonald
2022-06-09 20:24   ` Rob Herring
2022-06-07 15:53 ` [PATCH v2 07/17] dt-bindings: power: axp20x-battery: Add AXP192 compatible Aidan MacDonald
2022-06-09 20:24   ` Rob Herring
2022-06-07 15:53 ` [PATCH v2 08/17] mfd: axp20x: Add support for AXP192 Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 09/17] regulator: " Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups Aidan MacDonald
2022-06-08 13:22   ` Jonathan Cameron
2022-06-08 22:58     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions Aidan MacDonald
2022-06-08 13:28   ` Jonathan Cameron
2022-06-08 23:13     ` Aidan MacDonald
2022-06-11 18:23       ` Jonathan Cameron
2022-06-08 13:30   ` Jonathan Cameron
2022-06-07 15:53 ` [PATCH v2 12/17] iio: adc: axp20x_adc: Add support for AXP192 Aidan MacDonald
2022-06-08 13:35   ` Jonathan Cameron
2022-06-07 15:53 ` [PATCH v2 13/17] power: supply: axp20x_usb_power: " Aidan MacDonald
2022-06-09 20:53   ` Sebastian Reichel
2022-06-07 15:53 ` [PATCH v2 14/17] pinctrl: Add AXP192 pin control driver Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 15/17] power: axp20x_battery: Add constant charge current table Aidan MacDonald
2022-06-09 21:11   ` Sebastian Reichel
2022-06-10 15:40     ` Aidan MacDonald
2022-06-07 15:53 ` [PATCH v2 16/17] power: axp20x_battery: Support battery status without fuel gauge Aidan MacDonald
2022-06-09 21:11   ` Sebastian Reichel
2022-06-07 15:53 ` Aidan MacDonald [this message]
2022-06-09 21:12   ` [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192 Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220607155324.118102-18-aidanmacdonald.0x0@gmail.com \
    --to=aidanmacdonald.0x0@gmail.com \
    --cc=brgl@bgdev.pl \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=quic_gurus@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®