From: "Paul E. McKenney" <paulmck@kernel.org>
To: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Cc: "frederic@kernel.org" <frederic@kernel.org>,
"rcu@vger.kernel.org" <rcu@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] rcu/nocb: Avoid polling when myrdp->nocb_head_rdp list is empty
Date: Tue, 7 Jun 2022 21:06:27 -0700 [thread overview]
Message-ID: <20220608040627.GL1790663@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <PH0PR11MB588014C2451C2E65E583924DDAA49@PH0PR11MB5880.namprd11.prod.outlook.com>
On Wed, Jun 08, 2022 at 01:01:31AM +0000, Zhang, Qiang1 wrote:
> On Wed, Jun 08, 2022 at 12:41:28AM +0000, Zhang, Qiang1 wrote:
> > On Tue, Jun 07, 2022 at 03:50:57PM +0800, Zqiang wrote:
> > > Currently, If the 'rcu_nocb_poll' bootargs is enable, all rcuog
> > > kthreads enter polling mode. however, due to only insert CPU's rdp
> > > which belong to rcu_nocb_mask to 'nocb_head_rdp' list or all CPU's
> > > rdp served by rcuog kthread have been de-offloaded, these cause the
> > > 'nocb_head_rdp' list served by rcuog kthread is empty, when the
> > > 'nocb_head_rdp' is empty, the rcuog kthread in polling mode not
> > > actually do anything. fix it by exiting polling mode when the
> > > 'nocb_head_rdp'list is empty, otherwise entering polling mode.
> > >
> > > Signed-off-by: Zqiang <qiang1.zhang@intel.com>
> > >
> > >This looks a bit more plausible, but what have you done to test this?
> >
> > Yes , I have only tested as follows and I added two trace events.
> >
> > + trace_rcu_nocb_wake(rcu_state.name, cpu,
> > + TPS("EnterNoPoll"));
> >
> > rcu_wait(READ_ONCE(my_rdp->nocb_toggling_rdp));
> > + trace_rcu_nocb_wake(rcu_state.name, cpu,
> > + TPS("ExitNoPoll"));
> >
> > runqemu kvm slirp nographic qemuparams="-m 2048 -smp 4"
> > bootparams="rcu_nocbs=2,3 rcutree.dump_tree=1 rcu_nocb_poll
> > rcutorture.nocbs_nthreads=4 rcutorture.test_boost=0" -d
>
> >To exercise your change, could you please also add an appropriate value for the rcutorture.nocbs_nthreads kernel boot parameter? Without that boot parameter, your kernel will not actually offload or deoffload any CPUs.
>
> I have set ' rcutorture.nocbs_nthreads=4 ' in bootargs.
I see it now, apologies for my confusion!
Thanx, Paul
> >An alternative approach is to run rcutorture scenario TREE01.
>
> I will also use TREE01 for testing
>
> Thanks
> Zqiang
>
> >
> > Thanx, Paul
>
> > Thanks
> > Zqiang
> >
> > >
> > > Thanx, Paul
> > >
> > > ---
> > > v1->v2:
> > > Move rcu_nocb_poll flags check from rdp_offload_toggle() to
> > > rcu_nocb_rdp_offload/deoffload(), avoid unnecessary setting of
> > > rdp_gp->nocb_gp_sleep flags, because when rcu_nocb_poll is set the
> > > rdp_gp->nocb_gp_sleep is not used.
> > >
> > > kernel/rcu/tree_nocb.h | 16 ++++++++++------
> > > 1 file changed, 10 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/kernel/rcu/tree_nocb.h b/kernel/rcu/tree_nocb.h index
> > > fa8e4f82e60c..2a52c9abc681 100644
> > > --- a/kernel/rcu/tree_nocb.h
> > > +++ b/kernel/rcu/tree_nocb.h
> > > @@ -698,10 +698,14 @@ static void nocb_gp_wait(struct rcu_data *my_rdp)
> > > TPS("WakeBypassIsDeferred"));
> > > }
> > > if (rcu_nocb_poll) {
> > > - /* Polling, so trace if first poll in the series. */
> > > - if (gotcbs)
> > > - trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("Poll"));
> > > - schedule_timeout_idle(1);
> > > + if (list_empty(&my_rdp->nocb_head_rdp)) {
> > > + rcu_wait(READ_ONCE(my_rdp->nocb_toggling_rdp));
> > > + } else {
> > > + /* Polling, so trace if first poll in the series. */
> > > + if (gotcbs)
> > > + trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("Poll"));
> > > + schedule_timeout_idle(1);
> > > + }
> > > } else if (!needwait_gp) {
> > > /* Wait for callbacks to appear. */
> > > trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("Sleep")); @@
> > > -1030,7
> > > +1034,7 @@ static long rcu_nocb_rdp_deoffload(void *arg)
> > >
> > > mutex_lock(&rdp_gp->nocb_gp_kthread_mutex);
> > > if (rdp_gp->nocb_gp_kthread) {
> > > - if (wake_gp)
> > > + if (wake_gp || rcu_nocb_poll)
> > > wake_up_process(rdp_gp->nocb_gp_kthread);
> > >
> > > /*
> > > @@ -1152,7 +1156,7 @@ static long rcu_nocb_rdp_offload(void *arg)
> > > * rcu_nocb_unlock() rcu_nocb_unlock()
> > > */
> > > wake_gp = rdp_offload_toggle(rdp, true, flags);
> > > - if (wake_gp)
> > > + if (wake_gp || rcu_nocb_poll)
> > > wake_up_process(rdp_gp->nocb_gp_kthread);
> > > swait_event_exclusive(rdp->nocb_state_wq,
> > > rcu_segcblist_test_flags(cblist, SEGCBLIST_KTHREAD_CB) &&
> > > --
> > > 2.25.1
> > >
next prev parent reply other threads:[~2022-06-08 6:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-07 7:50 Zqiang
2022-06-07 16:16 ` Paul E. McKenney
2022-06-08 0:41 ` Zhang, Qiang1
2022-06-08 0:55 ` Paul E. McKenney
2022-06-08 1:01 ` Zhang, Qiang1
2022-06-08 4:06 ` Paul E. McKenney [this message]
2022-06-08 6:28 ` Zhang, Qiang1
2022-06-10 12:05 ` Frederic Weisbecker
2022-06-11 5:29 ` Zhang, Qiang1
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220608040627.GL1790663@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=frederic@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=qiang1.zhang@intel.com \
--cc=rcu@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®