From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: Amarula patchwork <linux-amarula@amarulasolutions.com>,
michael@amarulasolutions.com,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Paolo Abeni <pabeni@redhat.com>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v2 03/13] can: slcan: use the alloc_can_skb() helper
Date: Wed, 8 Jun 2022 18:51:06 +0200 [thread overview]
Message-ID: <20220608165116.1575390-4-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20220608165116.1575390-1-dario.binacchi@amarulasolutions.com>
It is used successfully by most (if not all) CAN device drivers. It
allows to remove replicated code.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Changes in v2:
- Put the data into the allocated skb directly instead of first
filling the "cf" on the stack and then doing a memcpy().
drivers/net/can/slcan.c | 69 +++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 37 deletions(-)
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 6162a9c21672..5d87e25e2285 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -54,6 +54,7 @@
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/can.h>
+#include <linux/can/dev.h>
#include <linux/can/skb.h>
#include <linux/can/can-ml.h>
@@ -143,85 +144,79 @@ static struct net_device **slcan_devs;
static void slc_bump(struct slcan *sl)
{
struct sk_buff *skb;
- struct can_frame cf;
+ struct can_frame *cf;
int i, tmp;
u32 tmpid;
char *cmd = sl->rbuff;
- memset(&cf, 0, sizeof(cf));
+ skb = alloc_can_skb(sl->dev, &cf);
+ if (unlikely(!skb)) {
+ sl->dev->stats.rx_dropped++;
+ return;
+ }
switch (*cmd) {
case 'r':
- cf.can_id = CAN_RTR_FLAG;
+ cf->can_id = CAN_RTR_FLAG;
fallthrough;
case 't':
/* store dlc ASCII value and terminate SFF CAN ID string */
- cf.len = sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN];
+ cf->len = sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN];
sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN] = 0;
/* point to payload data behind the dlc */
cmd += SLC_CMD_LEN + SLC_SFF_ID_LEN + 1;
break;
case 'R':
- cf.can_id = CAN_RTR_FLAG;
+ cf->can_id = CAN_RTR_FLAG;
fallthrough;
case 'T':
- cf.can_id |= CAN_EFF_FLAG;
+ cf->can_id |= CAN_EFF_FLAG;
/* store dlc ASCII value and terminate EFF CAN ID string */
- cf.len = sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN];
+ cf->len = sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN];
sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN] = 0;
/* point to payload data behind the dlc */
cmd += SLC_CMD_LEN + SLC_EFF_ID_LEN + 1;
break;
default:
- return;
+ goto decode_failed;
}
if (kstrtou32(sl->rbuff + SLC_CMD_LEN, 16, &tmpid))
- return;
+ goto decode_failed;
- cf.can_id |= tmpid;
+ cf->can_id |= tmpid;
/* get len from sanitized ASCII value */
- if (cf.len >= '0' && cf.len < '9')
- cf.len -= '0';
+ if (cf->len >= '0' && cf->len < '9')
+ cf->len -= '0';
else
- return;
+ goto decode_failed;
/* RTR frames may have a dlc > 0 but they never have any data bytes */
- if (!(cf.can_id & CAN_RTR_FLAG)) {
- for (i = 0; i < cf.len; i++) {
+ if (!(cf->can_id & CAN_RTR_FLAG)) {
+ for (i = 0; i < cf->len; i++) {
tmp = hex_to_bin(*cmd++);
if (tmp < 0)
- return;
- cf.data[i] = (tmp << 4);
+ goto decode_failed;
+
+ cf->data[i] = (tmp << 4);
tmp = hex_to_bin(*cmd++);
if (tmp < 0)
- return;
- cf.data[i] |= tmp;
+ goto decode_failed;
+
+ cf->data[i] |= tmp;
}
}
- skb = dev_alloc_skb(sizeof(struct can_frame) +
- sizeof(struct can_skb_priv));
- if (!skb)
- return;
-
- skb->dev = sl->dev;
- skb->protocol = htons(ETH_P_CAN);
- skb->pkt_type = PACKET_BROADCAST;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- can_skb_reserve(skb);
- can_skb_prv(skb)->ifindex = sl->dev->ifindex;
- can_skb_prv(skb)->skbcnt = 0;
-
- skb_put_data(skb, &cf, sizeof(struct can_frame));
-
sl->dev->stats.rx_packets++;
- if (!(cf.can_id & CAN_RTR_FLAG))
- sl->dev->stats.rx_bytes += cf.len;
+ if (!(cf->can_id & CAN_RTR_FLAG))
+ sl->dev->stats.rx_bytes += cf->len;
netif_rx(skb);
+ return;
+
+decode_failed:
+ dev_kfree_skb(skb);
}
/* parse tty input stream */
--
2.32.0
next prev parent reply other threads:[~2022-06-08 16:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-08 16:51 [PATCH v2 00/13] can: slcan: extend supported features Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 01/13] can: slcan: use the BIT() helper Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 02/13] can: slcan: use netdev helpers to print out messages Dario Binacchi
2022-06-08 16:51 ` Dario Binacchi [this message]
2022-06-09 8:07 ` [PATCH v2 03/13] can: slcan: use the alloc_can_skb() helper Marc Kleine-Budde
2022-06-08 16:51 ` [PATCH v2 04/13] can: slcan: use CAN network device driver API Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 05/13] can: slcan: simplify the device de-allocation Dario Binacchi
2022-06-08 20:38 ` Oliver Hartkopp
2022-06-11 10:46 ` Dario Binacchi
2022-06-12 16:23 ` Max Staudt
2022-06-12 17:13 ` Oliver Hartkopp
2022-06-12 21:20 ` Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 06/13] can: slcan: allow to send commands to the adapter Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 07/13] can: slcan: set bitrate by CAN device driver API Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 08/13] can: slcan: send the open command to the adapter Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 09/13] can: slcan: send the close " Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 10/13] can: slcan: move driver into separate sub directory Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 11/13] can: slcan: add ethtool support to reset adapter errors Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 12/13] can: slcan: extend the protocol with error info Dario Binacchi
2022-06-08 16:51 ` [PATCH v2 13/13] can: slcan: extend the protocol with CAN state info Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220608165116.1575390-4-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®