From: Alexander Steffen <Alexander.Steffen@infineon.com>
To: <jarkko@kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-integrity@vger.kernel.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>,
<peterhuewe@gmx.de>, <jgg@ziepe.ca>,
<krzysztof.kozlowski+dt@linaro.org>,
Johannes Holland <johannes.holland@infineon.com>,
Amir Mizinski <amirmizi6@gmail.com>
Subject: [PATCH v6 2/3] tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer
Date: Wed, 8 Jun 2022 19:31:12 +0200 [thread overview]
Message-ID: <20220608173113.9232-3-Alexander.Steffen@infineon.com> (raw)
In-Reply-To: <20220608173113.9232-1-Alexander.Steffen@infineon.com>
Some TPMs, e.g. those implementing the I2C variant of TIS, can verify
data transfers to/from the FIFO with a CRC. The CRC is calculated over
the entirety of the FIFO register. Since the phy_ops layer is not aware
when the core layer is done reading/writing the FIFO, CRC verification
must be triggered from the core layer. To this end, add an optional
phy_ops API call.
Co-developed-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
---
drivers/char/tpm/tpm_tis_core.c | 14 ++++++++++++++
drivers/char/tpm/tpm_tis_core.h | 10 ++++++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index dc56b976d816..757623bacfd5 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -289,6 +289,7 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
int size = 0;
int status;
u32 expected;
+ int rc;
if (count < TPM_HEADER_SIZE) {
size = -EIO;
@@ -328,6 +329,13 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
goto out;
}
+ rc = tpm_tis_verify_crc(priv, (size_t)size, buf);
+ if (rc < 0) {
+ dev_err(&chip->dev, "CRC mismatch for response.\n");
+ size = rc;
+ goto out;
+ }
+
out:
tpm_tis_ready(chip);
return size;
@@ -443,6 +451,12 @@ static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
if (rc < 0)
return rc;
+ rc = tpm_tis_verify_crc(priv, len, buf);
+ if (rc < 0) {
+ dev_err(&chip->dev, "CRC mismatch for command.\n");
+ return rc;
+ }
+
/* go and do it */
rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
if (rc < 0)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 6c203f36b8a1..66a5a13cd1df 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -121,6 +121,8 @@ struct tpm_tis_phy_ops {
u8 *result, enum tpm_tis_io_mode mode);
int (*write_bytes)(struct tpm_tis_data *data, u32 addr, u16 len,
const u8 *value, enum tpm_tis_io_mode mode);
+ int (*verify_crc)(struct tpm_tis_data *data, size_t len,
+ const u8 *value);
};
static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
@@ -188,6 +190,14 @@ static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr,
return rc;
}
+static inline int tpm_tis_verify_crc(struct tpm_tis_data *data, size_t len,
+ const u8 *value)
+{
+ if (!data->phy_ops->verify_crc)
+ return 0;
+ return data->phy_ops->verify_crc(data, len, value);
+}
+
static inline bool is_bsw(void)
{
#ifdef CONFIG_X86
--
2.25.1
next prev parent reply other threads:[~2022-06-08 17:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-08 17:31 [PATCH v6 0/3] tpm_tis_i2c Alexander Steffen
2022-06-08 17:31 ` [PATCH v6 1/3] dt-bindings: trivial-devices: Add Infineon SLB9673 TPM Alexander Steffen
2022-06-14 20:58 ` Rob Herring
2022-06-08 17:31 ` Alexander Steffen [this message]
2022-06-08 17:31 ` [PATCH v6 3/3] tpm: Add tpm_tis_i2c backend for tpm_tis_core Alexander Steffen
2022-06-09 5:31 ` Jarkko Sakkinen
2022-06-10 11:11 ` Johannes Holland
2022-06-15 18:41 ` Jarkko Sakkinen
2022-06-10 15:38 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220608173113.9232-3-Alexander.Steffen@infineon.com \
--to=alexander.steffen@infineon.com \
--cc=amirmizi6@gmail.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=johannes.holland@infineon.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®