From: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] arm64: dts: rockchip: rk356x: Add HDMI audio nodes
Date: Sat, 11 Jun 2022 08:52:59 +0200 [thread overview]
Message-ID: <20220611065300.885212-2-frattaroli.nicolas@gmail.com> (raw)
In-Reply-To: <20220611065300.885212-1-frattaroli.nicolas@gmail.com>
This adds the i2s0 node and an hdmi-sound sound device to the
rk356x device tree. On the rk356[68], the i2s0 controller is
connected to HDMI audio.
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 33 ++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index cc1c5a65c5e5..319981c3e9f7 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -183,6 +183,22 @@ opp-800000000 {
};
};
+ hdmi_sound: hdmi-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "HDMI";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ status = "disabled";
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
@@ -951,6 +967,23 @@ spdif: spdif@fe460000 {
status = "disabled";
};
+ i2s0_8ch: i2s@fe400000 {
+ compatible = "rockchip,rk3568-i2s-tdm";
+ reg = <0x0 0xfe400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+ assigned-clock-rates = <1188000000>, <1188000000>;
+ clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac1 0>;
+ dma-names = "tx";
+ resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
i2s1_8ch: i2s@fe410000 {
compatible = "rockchip,rk3568-i2s-tdm";
reg = <0x0 0xfe410000 0x0 0x1000>;
--
2.36.1
next prev parent reply other threads:[~2022-06-11 6:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-11 6:52 [PATCH v3 0/2] HDMI Audio on RK356x/Quartz64 Model A Nicolas Frattaroli
2022-06-11 6:52 ` Nicolas Frattaroli [this message]
2022-06-11 6:53 ` [PATCH v3 2/2] arm64: dts: rockchip: Enable HDMI audio on Quartz64 A Nicolas Frattaroli
2022-06-11 13:50 ` [PATCH v3 0/2] HDMI Audio on RK356x/Quartz64 Model A Peter Geis
2022-06-11 15:15 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220611065300.885212-2-frattaroli.nicolas@gmail.com \
--to=frattaroli.nicolas@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.riesch@wolfvision.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®