From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH 2/2] ARM: dts: at91: sama5d2: fix compilation warning
Date: Wed, 15 Jun 2022 11:06:33 +0300 [thread overview]
Message-ID: <20220615080633.1881196-2-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20220615080633.1881196-1-claudiu.beznea@microchip.com>
Fix the following compilation warning:
arch/arm/boot/dts/sama5d2.dtsi:371.29-382.6: Warning
(avoid_unnecessary_addr_size): /ahb/apb/ethernet@f8008000:
unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
also defined at arch/arm/boot/dts/at91-sama5d2_icp.dts:353.8-363.3
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 2 ++
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 2 ++
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 ++
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 ++
arch/arm/boot/dts/sama5d2.dtsi | 2 --
5 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index a4623cc67cc1..c365731b2cce 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -83,6 +83,8 @@ kernel@200000 {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
ethernet-phy@7 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index ba621783acdb..76b2025c67b4 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -194,6 +194,8 @@ regulator-state-mem {
&macb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
ethernet-phy@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..88cf125a55ed 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -139,6 +139,8 @@ spi0: spi@f8000000 {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
status = "okay";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index cdfe891f9a9e..bcc3c1bacb25 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -147,6 +147,8 @@ flash@0 {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
phy-mode = "rmii";
status = "okay";
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index b147db8b973f..5b2f2e922d40 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -384,8 +384,6 @@ macb0: ethernet@f8008000 {
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */
66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
- #address-cells = <1>;
- #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
--
2.34.1
next prev parent reply other threads:[~2022-06-15 8:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 8:06 [PATCH 1/2] " Claudiu Beznea
2022-06-15 8:06 ` Claudiu Beznea [this message]
2022-07-04 6:46 ` [PATCH 2/2] " Claudiu.Beznea
2022-07-04 6:46 ` [PATCH 1/2] " Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220615080633.1881196-2-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®