From: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
To: <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>,
<Nicolas.Ferre@microchip.com>, <Claudiu.Beznea@microchip.com>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <UNGLinuxDriver@microchip.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 2/3] dt-bindings: mfd: atmel,flexcom: Add new compatible string for lan966x
Date: Mon, 20 Jun 2022 20:16:33 +0530 [thread overview]
Message-ID: <20220620144634.25464-3-kavyasree.kotagiri@microchip.com> (raw)
In-Reply-To: <20220620144634.25464-1-kavyasree.kotagiri@microchip.com>
LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
functions being configured.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
---
v4 -> v5:
- Fixed indentations and dt-schema errors.
- No errors seen with 'make dt_binding_check'.
v3 -> v4:
- Added else condition to allOf:if:then.
v2 -> v3:
- Add reg property of lan966x missed in v2.
v1 -> v2:
- Use allOf:if:then for lan966x dt properties
.../bindings/mfd/atmel,flexcom.yaml | 78 ++++++++++++++++++-
1 file changed, 77 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
index fc5af946b568..216d08b44bb3 100644
--- a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
+++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
@@ -18,9 +18,11 @@ properties:
compatible:
enum:
- atmel,sama5d2-flexcom
+ - microchip,lan966x-flexcom
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
clocks:
maxItems: 1
@@ -47,6 +49,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3]
+ microchip,flx-shrd-pins:
+ description: Specify the Flexcom shared pins to be used for flexcom
+ chip-selects.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 20
+
+ microchip,flx-cs:
+ description: Flexcom chip selects. Here, value of '0' represents "cts" line
+ of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
+ "rts" line of flexcom USART or "cs1" line of flexcom SPI.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
patternProperties:
"^serial@[0-9a-f]+$":
description: See atmel-usart.txt for details of USART bindings.
@@ -73,6 +96,31 @@ required:
- ranges
- atmel,flexcom-mode
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,lan966x-flexcom
+
+ then:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ - description: Flexcom shared registers map
+ required:
+ - microchip,flx-shrd-pins
+ - microchip,flx-cs
+
+ else:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ microchip,flx-shrd-pins: false
+ microchip,flx-cs: false
+
additionalProperties: false
examples:
@@ -101,4 +149,32 @@ examples:
atmel,fifo-size = <32>;
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ flx3: flexcom@e0064000 {
+ compatible = "microchip,lan966x-flexcom";
+ reg = <0xe0064000 0x100>,
+ <0xe2004180 0x8>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0040000 0x800>;
+ atmel,flexcom-mode = <2>;
+ microchip,flx-shrd-pins = <9>;
+ microchip,flx-cs = <0>;
+
+ spi3: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ };
+ };
...
--
2.17.1
next prev parent reply other threads:[~2022-06-20 15:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-20 14:46 [PATCH v5 0/3] Add support for lan966x flexcom chip-select configuration Kavyasree Kotagiri
2022-06-20 14:46 ` [PATCH v5 1/3] dt-bindings: mfd: atmel,flexcom: Convert to json-schema Kavyasree Kotagiri
2022-06-21 7:16 ` Krzysztof Kozlowski
2022-06-20 14:46 ` Kavyasree Kotagiri [this message]
2022-06-21 7:19 ` [PATCH v5 2/3] dt-bindings: mfd: atmel,flexcom: Add new compatible string for lan966x Krzysztof Kozlowski
2022-06-20 14:46 ` [PATCH v5 3/3] mfd: atmel-flexcom: Add support for lan966x flexcom chip-select configuration Kavyasree Kotagiri
2022-06-27 10:34 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220620144634.25464-3-kavyasree.kotagiri@microchip.com \
--to=kavyasree.kotagiri@microchip.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®