From: Arun Ramadoss <arun.ramadoss@microchip.com>
To: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>
Cc: Woojung Huh <woojung.huh@microchip.com>,
<UNGLinuxDriver@microchip.com>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>
Subject: [Patch net-next 05/13] net: dsa: microchip: move broadcast rate limit to ksz_setup
Date: Wed, 22 Jun 2022 14:34:17 +0530 [thread overview]
Message-ID: <20220622090425.17709-6-arun.ramadoss@microchip.com> (raw)
In-Reply-To: <20220622090425.17709-1-arun.ramadoss@microchip.com>
This patch move the 10% broadcast protection from the individual setup
to ksz_setup. In the ksz9477, broadcast protection is updated in reset
function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
---
drivers/net/dsa/microchip/ksz8795.c | 6 ------
drivers/net/dsa/microchip/ksz8795_reg.h | 10 ----------
drivers/net/dsa/microchip/ksz9477.c | 6 ------
drivers/net/dsa/microchip/ksz9477_reg.h | 10 ----------
drivers/net/dsa/microchip/ksz_common.c | 19 +++++++++++++++++++
drivers/net/dsa/microchip/ksz_common.h | 11 +++++++++++
6 files changed, 30 insertions(+), 32 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 3d692d5816cb..1bbad202b238 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1415,12 +1415,6 @@ static int ksz8_setup(struct dsa_switch *ds)
if (!ksz_is_ksz88x3(dev))
ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
- /* set broadcast storm protection 10% rate */
- regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
- BROADCAST_STORM_RATE,
- (BROADCAST_STORM_VALUE *
- BROADCAST_STORM_PROT_RATE) / 100);
-
for (i = 0; i < (dev->info->num_vlans / 4); i++)
ksz8_r_vlan_entries(dev, i);
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index b8f6ad7581bc..7b56e533a688 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -64,13 +64,9 @@
#define SW_FLOW_CTRL BIT(5)
#define SW_10_MBIT BIT(4)
#define SW_REPLACE_VID BIT(3)
-#define BROADCAST_STORM_RATE_HI 0x07
#define REG_SW_CTRL_5 0x07
-#define BROADCAST_STORM_RATE_LO 0xFF
-#define BROADCAST_STORM_RATE 0x07FF
-
#define REG_SW_CTRL_6 0x08
#define SW_MIB_COUNTER_FLUSH BIT(7)
@@ -797,12 +793,6 @@
#define REG_IND_EEE_GLOB2_LO 0x34
#define REG_IND_EEE_GLOB2_HI 0x35
-/* Driver set switch broadcast storm protection at 10% rate. */
-#define BROADCAST_STORM_PROT_RATE 10
-
-/* 148,800 frames * 67 ms / 100 */
-#define BROADCAST_STORM_VALUE 9969
-
/**
* MIB_COUNTER_VALUE 00-00000000-3FFFFFFF
* MIB_TOTAL_BYTES 00-0000000F-FFFFFFFF
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index c8965012d1c7..b2a6d2365c82 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -197,12 +197,6 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
- /* set broadcast storm protection 10% rate */
- regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2,
- BROADCAST_STORM_RATE,
- (BROADCAST_STORM_VALUE *
- BROADCAST_STORM_PROT_RATE) / 100);
-
data8 = SW_ENABLE_REFCLKO;
if (dev->synclko_disable)
data8 = 0;
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 077e35ab11b5..0345fc7ac850 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -276,13 +276,9 @@
#define REG_SW_MAC_CTRL_2 0x0332
#define SW_REPLACE_VID BIT(3)
-#define BROADCAST_STORM_RATE_HI 0x07
#define REG_SW_MAC_CTRL_3 0x0333
-#define BROADCAST_STORM_RATE_LO 0xFF
-#define BROADCAST_STORM_RATE 0x07FF
-
#define REG_SW_MAC_CTRL_4 0x0334
#define SW_PASS_PAUSE BIT(3)
@@ -1652,12 +1648,6 @@
#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1)
#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1)
-/* Driver set switch broadcast storm protection at 10% rate. */
-#define BROADCAST_STORM_PROT_RATE 10
-
-/* 148,800 frames * 67 ms / 100 */
-#define BROADCAST_STORM_VALUE 9969
-
#define KSZ9477_MAX_FRAME_SIZE 9000
#endif /* KSZ9477_REGS_H */
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 792f891579ae..976b2b18908f 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -153,6 +153,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
+ .broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
@@ -186,6 +187,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
+ .broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
@@ -205,6 +207,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
+ .broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
@@ -223,6 +226,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
+ .broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, true},
.supports_rmii = {false, false, true},
.internal_phy = {true, true, false},
@@ -241,6 +245,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, false},
.supports_rmii = {false, false, false, false,
@@ -264,6 +269,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, true},
.supports_rmii = {false, false, false, false,
@@ -286,6 +292,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, true},
.supports_rmii = {false, false, true},
.supports_rgmii = {false, false, true},
@@ -305,6 +312,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, true},
.supports_rmii = {false, false, false, false,
@@ -327,6 +335,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
@@ -345,6 +354,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false, true, true},
.supports_rmii = {false, false, false, false, true, true},
.supports_rgmii = {false, false, false, false, true, true},
@@ -363,6 +373,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
@@ -385,6 +396,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
@@ -407,6 +419,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
+ .broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
@@ -623,6 +636,12 @@ int ksz_setup(struct dsa_switch *ds)
return ret;
}
+ /* set broadcast storm protection 10% rate */
+ regmap_update_bits(dev->regmap[1], dev->info->broadcast_ctrl_reg,
+ BROADCAST_STORM_RATE,
+ (BROADCAST_STORM_VALUE *
+ BROADCAST_STORM_PROT_RATE) / 100);
+
dev->dev_ops->config_cpu_port(ds);
dev->dev_ops->enable_stp_addr(dev);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 3b8e1d1887b8..6aeee4771f06 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -47,6 +47,7 @@ struct ksz_chip_data {
int mib_cnt;
u8 reg_mib_cnt;
int stp_ctrl_reg;
+ int broadcast_ctrl_reg;
bool supports_mii[KSZ_MAX_NUM_PORTS];
bool supports_rmii[KSZ_MAX_NUM_PORTS];
bool supports_rgmii[KSZ_MAX_NUM_PORTS];
@@ -415,6 +416,16 @@ static inline void ksz_regmap_unlock(void *__mtx)
#define SW_REV_ID_M GENMASK(7, 4)
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROT_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE 9969
+
+#define BROADCAST_STORM_RATE_HI 0x07
+#define BROADCAST_STORM_RATE_LO 0xFF
+#define BROADCAST_STORM_RATE 0x07FF
+
/* Regmap tables generation */
#define KSZ_SPI_OP_RD 3
#define KSZ_SPI_OP_WR 2
--
2.36.1
next prev parent reply other threads:[~2022-06-22 9:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-22 9:04 [Patch net-next 00/13] net: dsa: microchip: common spi probe for the ksz series switches - part 2 Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 01/13] net: dsa: microchip: rename shutdown to reset in ksz_dev_ops Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 02/13] net: dsa: microchip: add config_cpu_port to struct ksz_dev_ops Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 03/13] net: dsa: microchip: add the enable_stp_addr pointer in ksz_dev_ops Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 04/13] net: dsa: microchip: move setup function to ksz_common Arun Ramadoss
2022-06-22 9:04 ` Arun Ramadoss [this message]
2022-06-22 9:04 ` [Patch net-next 06/13] net: dsa: microchip: move multicast enable to ksz_setup Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 07/13] net: dsa: microchip: move start of switch " Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 08/13] net: dsa: microchip: common dsa_switch_ops for ksz switches Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 09/13] net: dsa: microchip: ksz9477: separate phylink mode from switch register Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 10/13] net: dsa: microchip: common menuconfig for ksz series switch Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 11/13] net: dsa: microchip: move ksz_dev_ops to ksz_common.c Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 12/13] net: dsa: microchip: remove the ksz8/ksz9477_switch_register Arun Ramadoss
2022-06-22 9:04 ` [Patch net-next 13/13] net: dsa: microchip: common ksz_spi_probe for ksz switches Arun Ramadoss
2022-06-24 10:50 ` [Patch net-next 00/13] net: dsa: microchip: common spi probe for the ksz series switches - part 2 patchwork-bot+netdevbpf
2022-06-24 11:23 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220622090425.17709-6-arun.ramadoss@microchip.com \
--to=arun.ramadoss@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®