mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
	Sean Christopherson <seanjc@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RFC v1 07/10] KVM: VMX: Store required-1 VMX controls in vmcs_config
Date: Wed, 22 Jun 2022 18:44:29 +0200	[thread overview]
Message-ID: <20220622164432.194640-8-vkuznets@redhat.com> (raw)
In-Reply-To: <20220622164432.194640-1-vkuznets@redhat.com>

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/vmx/capabilities.h |  5 +++++
 arch/x86/kvm/vmx/vmx.c          | 28 +++++++++++++++++++++-------
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
index 069d8d298e1d..2e223440e7ed 100644
--- a/arch/x86/kvm/vmx/capabilities.h
+++ b/arch/x86/kvm/vmx/capabilities.h
@@ -60,11 +60,16 @@ struct vmcs_config {
 	u32 basic_cap;
 	u32 revision_id;
 	u32 pin_based_exec_ctrl;
+	u32 pin_based_exec_ctrl_req1;
 	u32 cpu_based_exec_ctrl;
+	u32 cpu_based_exec_ctrl_req1;
 	u32 cpu_based_2nd_exec_ctrl;
+	u32 cpu_based_2nd_exec_ctrl_req1;
 	u64 cpu_based_3rd_exec_ctrl;
 	u32 vmexit_ctrl;
+	u32 vmexit_ctrl_req1;
 	u32 vmentry_ctrl;
+	u32 vmentry_ctrl_req1;
 	struct nested_vmx_msrs nested;
 };
 extern struct vmcs_config vmcs_config;
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 37d5c5bc4cd2..05a9919a2fec 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2411,7 +2411,7 @@ static bool cpu_has_sgx(void)
 }
 
 static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
-				      u32 msr, u32 *result)
+				      u32 msr, u32 *result_high, u32 *result_low)
 {
 	u32 vmx_msr_low, vmx_msr_high;
 	u32 ctl = ctl_min | ctl_opt;
@@ -2425,7 +2425,8 @@ static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
 	if (ctl_min & ~ctl)
 		return -EIO;
 
-	*result = ctl;
+	*result_high = ctl;
+	*result_low = vmx_msr_low;
 	return 0;
 }
 
@@ -2449,6 +2450,11 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	u64 _cpu_based_3rd_exec_control = 0;
 	u32 _vmexit_control = 0;
 	u32 _vmentry_control = 0;
+	u32 _pin_based_exec_control_low = 0;
+	u32 _cpu_based_exec_control_low = 0;
+	u32 _cpu_based_2nd_exec_control_low = 0;
+	u32 _vmexit_control_low = 0;
+	u32 _vmentry_control_low = 0;
 	int i;
 
 	/*
@@ -2494,7 +2500,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      CPU_BASED_ACTIVATE_SECONDARY_CONTROLS |
 	      CPU_BASED_ACTIVATE_TERTIARY_CONTROLS;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
-				&_cpu_based_exec_control) < 0)
+				&_cpu_based_exec_control,
+				&_cpu_based_exec_control_low) < 0)
 		return -EIO;
 	if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
 		min2 = 0;
@@ -2526,7 +2533,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 			opt2 |= SECONDARY_EXEC_ENCLS_EXITING;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
-					&_cpu_based_2nd_exec_control) < 0)
+					&_cpu_based_2nd_exec_control,
+					&_cpu_based_2nd_exec_control_low) < 0)
 			return -EIO;
 	}
 #ifndef CONFIG_X86_64
@@ -2591,14 +2599,15 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      VM_EXIT_PT_CONCEAL_PIP |
 	      VM_EXIT_CLEAR_IA32_RTIT_CTL;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_EXIT_CTLS,
-				&_vmexit_control) < 0)
+				&_vmexit_control, &_vmexit_control_low) < 0)
 		return -EIO;
 
 	min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
 	opt = PIN_BASED_VIRTUAL_NMIS | PIN_BASED_POSTED_INTR |
 		 PIN_BASED_VMX_PREEMPTION_TIMER;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
-				&_pin_based_exec_control) < 0)
+				&_pin_based_exec_control,
+				&_pin_based_exec_control_low) < 0)
 		return -EIO;
 
 	if (cpu_has_broken_vmx_preemption_timer())
@@ -2618,7 +2627,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      VM_ENTRY_PT_CONCEAL_PIP |
 	      VM_ENTRY_LOAD_IA32_RTIT_CTL;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_ENTRY_CTLS,
-				&_vmentry_control) < 0)
+				&_vmentry_control, &_vmentry_control_low) < 0)
 		return -EIO;
 
 	for (i = 0; i < ARRAY_SIZE(vmcs_entry_exit_pairs); i++) {
@@ -2684,11 +2693,16 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	vmcs_conf->revision_id = vmx_msr_low;
 
 	vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control;
+	vmcs_conf->pin_based_exec_ctrl_req1 = _pin_based_exec_control_low;
 	vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control;
+	vmcs_conf->cpu_based_exec_ctrl_req1 = _cpu_based_exec_control_low;
 	vmcs_conf->cpu_based_2nd_exec_ctrl = _cpu_based_2nd_exec_control;
+	vmcs_conf->cpu_based_2nd_exec_ctrl_req1 = _cpu_based_2nd_exec_control_low;
 	vmcs_conf->cpu_based_3rd_exec_ctrl = _cpu_based_3rd_exec_control;
 	vmcs_conf->vmexit_ctrl         = _vmexit_control;
+	vmcs_conf->vmexit_ctrl_req1         = _vmexit_control_low;
 	vmcs_conf->vmentry_ctrl        = _vmentry_control;
+	vmcs_conf->vmentry_ctrl_req1        = _vmentry_control_low;
 
 #if IS_ENABLED(CONFIG_HYPERV)
 	if (enlightened_vmcs)
-- 
2.35.3


  parent reply	other threads:[~2022-06-22 16:45 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-22 16:44 [PATCH RFC v1 00/10] KVM: nVMX: Use vmcs_config for setting up nested VMX MSRs Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 01/10] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-06-24  0:09   ` Sean Christopherson
2022-06-22 16:44 ` [PATCH RFC v1 02/10] KVM: VMX: Add missing CPU based VM execution controls to vmcs_config Vitaly Kuznetsov
2022-06-24  0:12   ` Sean Christopherson
2022-06-27 15:12     ` Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 03/10] KVM: VMX: Move CPU_BASED_{CR3_LOAD,CR3_STORE,INVLPG}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-06-24  0:04   ` Sean Christopherson
2022-06-22 16:44 ` [PATCH RFC v1 04/10] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 05/10] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 06/10] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-03  9:01   ` [KVM] 4ce471284f: kvm-unit-tests.vmx_pf_vpid_test.fail kernel test robot
2022-06-22 16:44 ` Vitaly Kuznetsov [this message]
2022-06-22 16:44 ` [PATCH RFC v1 08/10] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 09/10] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-22 16:44 ` [PATCH RFC v1 10/10] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-24  0:31 ` [PATCH RFC v1 00/10] KVM: nVMX: Use vmcs_config for setting up nested VMX MSRs Sean Christopherson
2022-06-27 16:06   ` Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220622164432.194640-8-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=anrayabh@linux.microsoft.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®