[PATCH v2 2/4] dt-bindings: usb: mtk-xhci: Make all clocks required

["Nícolas F. R. A. Prado" <nfraprado@collabora.com>]

All of the clocks listed in the binding are always wired to the XHCI
controller hardware blocks on all SoCs. The reason some clocks were made
optional in the binding was to account for the fact that depending on
the SoC, some of the clocks might be fixed (ie not controlled by
software).

Given that the devicetree should represent the hardware, make all clocks
required in the binding. Subsequent patches will make the DTS changes to
specify fixed-clocks for the clocks that aren't controllable.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

Changes in v2:
- Undid clock list changes that allowed middle clocks to be missing from
  v1 and made all clocks required instead
- Rewrote commit message and title

 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 63cbc2b62d18..1444d18ef9bc 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -67,7 +67,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 1
     items:
       - description: Controller clock used by normal mode
       - description: Reference clock used by low power mode etc
@@ -76,9 +75,8 @@ properties:
       - description: controller clock
 
   clock-names:
-    minItems: 1
     items:
-      - const: sys_ck  # required, the following ones are optional
+      - const: sys_ck
       - const: ref_ck
       - const: mcu_ck
       - const: dma_ck
-- 
2.36.1