From: Egor Vorontsov <sdoregor@sdore.me>
To: unlisted-recipients:; (no To-header on input)
Cc: Egor Vorontsov <sdoregor@sdore.me>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Jonas Hahnfeld <hahnjo@hahnjo.de>,
Brendan Grieve <brendan@grieve.com.au>,
William Overton <willovertonuk@gmail.com>,
Alexander Tsoy <alexander@tsoy.me>,
alsa-devel@alsa-project.org (moderated list:SOUND),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/2] ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
Date: Mon, 27 Jun 2022 13:00:35 +0300 [thread overview]
Message-ID: <20220627100041.2861494-2-sdoregor@sdore.me> (raw)
In-Reply-To: <20220627100041.2861494-1-sdoregor@sdore.me>
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
---
sound/usb/quirks-table.h | 132 +++++++++++++++++++++++++++++++++++++++
sound/usb/quirks.c | 4 ++
2 files changed, 136 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c61445eb83d8..fdd62139d1ab 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -4119,6 +4119,138 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
+{
+ /*
+ * Fiero SC-01 (firmware v1.0.0 @ 48 kHz)
+ */
+ USB_DEVICE(0x2b53, 0x0023),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Fiero",
+ .product_name = "SC-01",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* Playback */
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 },
+ .clock = 0x29
+ }
+ },
+ /* Capture */
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC |
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 },
+ .clock = 0x29
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+{
+ /*
+ * Fiero SC-01 (firmware v1.0.0 @ 96 kHz)
+ */
+ USB_DEVICE(0x2b53, 0x0024),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Fiero",
+ .product_name = "SC-01",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* Playback */
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_96000,
+ .rate_min = 96000,
+ .rate_max = 96000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 96000 },
+ .clock = 0x29
+ }
+ },
+ /* Capture */
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC |
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_96000,
+ .rate_min = 96000,
+ .rate_max = 96000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 96000 },
+ .clock = 0x29
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
/*
* Fiero SC-01 (firmware v1.1.0)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 81bdd921a279..5ff22cc3d7c1 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1908,6 +1908,10 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_ALIGN_TRANSFER),
DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */
QUIRK_FLAG_GET_SAMPLE_RATE),
+ DEVICE_FLG(0x2b53, 0x0023, /* Fiero SC-01 (firmware v1.0.0 @ 48 kHz) */
+ QUIRK_FLAG_GENERIC_IMPLICIT_FB),
+ DEVICE_FLG(0x2b53, 0x0024, /* Fiero SC-01 (firmware v1.0.0 @ 96 kHz) */
+ QUIRK_FLAG_GENERIC_IMPLICIT_FB),
DEVICE_FLG(0x2b53, 0x0031, /* Fiero SC-01 (firmware v1.1.0) */
QUIRK_FLAG_GENERIC_IMPLICIT_FB),
--
2.36.1
next prev parent reply other threads:[~2022-06-27 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-27 10:00 [PATCH 1/2] ALSA: usb-audio: Add quirk for Fiero SC-01 Egor Vorontsov
2022-06-27 10:00 ` Egor Vorontsov [this message]
2022-07-04 12:12 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627100041.2861494-2-sdoregor@sdore.me \
--to=sdoregor@sdore.me \
--cc=alexander@tsoy.me \
--cc=alsa-devel@alsa-project.org \
--cc=brendan@grieve.com.au \
--cc=hahnjo@hahnjo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=willovertonuk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®