[PATCH -next] usb: dwc3-am62: remove unnecesary clk_put()

[Yang Yingliang <yangyingliang@huawei.com>]

The clk get by devm_clk_get() will be released in devres_release_all(),
so there is no need explicitly call clk_put(), or it will cause UAF.

Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/dwc3/dwc3-am62.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index fea7aca35dc8..173cf3579c55 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -195,8 +195,7 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 
 	if (i == ARRAY_SIZE(dwc3_ti_rate_table)) {
 		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
-		ret = -EINVAL;
-		goto err_clk_disable;
+		return -EINVAL;
 	}
 
 	data->rate_code = i;
@@ -204,7 +203,7 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	/* Read the syscon property and set the rate code */
 	ret = phy_syscon_pll_refclk(data);
 	if (ret)
-		goto err_clk_disable;
+		return ret;
 
 	/* VBUS divider select */
 	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
@@ -245,8 +244,6 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	clk_disable_unprepare(data->usb2_refclk);
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
-err_clk_disable:
-	clk_put(data->usb2_refclk);
 	return ret;
 }
 
@@ -276,7 +273,6 @@ static int dwc3_ti_remove(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 
-	clk_put(data->usb2_refclk);
 	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
-- 
2.25.1