[PATCH v2] x86/mce: retrieve poison range from hardware whenever supported

[Jane Chu <jane.chu@oracle.com>]

With Commit 7917f9cdb503 ("acpi/nfit: rely on mce->misc to determine
poison granularity") that changed nfit_handle_mce() callback to report
badrange according to 1ULL << MCI_MISC_ADDR_LSB(mce->misc), it's been
discovered that the mce->misc LSB field is 0x1000 bytes, hence injecting
2 back-to-back poisons and the driver ends up logging 8 badblocks,
because 0x1000 bytes is 8 512-byte.

Dan Williams noticed that apei_mce_report_mem_error() hardcode
the LSB field to PAGE_SHIFT instead of consulting the input
struct cper_sec_mem_err record.  So change to rely on hardware whenever
support is available.

v1: https://lkml.org/lkml/2022/7/15/1040
Signed-off-by: Jane Chu <jane.chu@oracle.com>
---
 arch/x86/kernel/cpu/mce/apei.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mce/apei.c b/arch/x86/kernel/cpu/mce/apei.c
index 717192915f28..a4d5893632e0 100644
--- a/arch/x86/kernel/cpu/mce/apei.c
+++ b/arch/x86/kernel/cpu/mce/apei.c
@@ -29,6 +29,7 @@
 void apei_mce_report_mem_error(int severity, struct cper_sec_mem_err *mem_err)
 {
 	struct mce m;
+	int lsb;
 
 	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
 		return;
@@ -37,7 +38,10 @@ void apei_mce_report_mem_error(int severity, struct cper_sec_mem_err *mem_err)
 	m.bank = -1;
 	/* Fake a memory read error with unknown channel */
 	m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | MCI_STATUS_MISCV | 0x9f;
-	m.misc = (MCI_MISC_ADDR_PHYS << 6) | PAGE_SHIFT;
+	lsb = __builtin_ffs(mem_err->physical_addr_mask) - 1;
+	if (lsb <= 0)
+		lsb = PAGE_SHIFT;
+	m.misc = (MCI_MISC_ADDR_PHYS << 6) | lsb;
 
 	if (severity >= GHES_SEV_RECOVERABLE)
 		m.status |= MCI_STATUS_UC;
-- 
2.18.4