From: Geert Uytterhoeven <geert@linux-m68k.org>
To: linux-kernel@vger.kernel.org
Subject: Build regressions/improvements in v5.19-rc7
Date: Mon, 18 Jul 2022 09:43:08 +0200 [thread overview]
Message-ID: <20220718074308.3801763-1-geert@linux-m68k.org> (raw)
In-Reply-To: <CAHk-=wj63HHDU0MTRVKese5a4j82g3s3u4Ztno7=7Cj=cRRFFQ@mail.gmail.com>
Below is the list of build error/warning regressions/improvements in
v5.19-rc7[1] compared to v5.18[2].
Summarized:
- build errors: +7/-4
- build warnings: +11/-11
JFYI, when comparing v5.19-rc7[1] to v5.19-rc6[3], the summaries are:
- build errors: +11/-6
- build warnings: +0/-1
Note that there may be false regressions, as some logs are incomplete.
Still, they're build errors/warnings.
Happy fixing! ;-)
Thanks to the linux-next team for providing the build service.
[1] http://kisskb.ellerman.id.au/kisskb/branch/linus/head/ff6992735ade75aae3e35d16b17da1008d753d28/ (all 135 configs)
[2] http://kisskb.ellerman.id.au/kisskb/branch/linus/head/4b0986a3613c92f4ec1bdc7f60ec66fea135991f/ (131 out of 135 configs)
[3] http://kisskb.ellerman.id.au/kisskb/branch/linus/head/32346491ddf24599decca06190ebca03ff9de7f8/ (all 135 configs)
*** ERRORS ***
7 error regressions:
+ error: relocation truncated to fit: R_SPARC_WDISP22 against `.init.text': => (.head.text+0x5100), (.head.text+0x5040)
+ error: relocation truncated to fit: R_SPARC_WDISP22 against symbol `leon_smp_cpu_startup' defined in .text section in arch/sparc/kernel/trampoline_32.o: => (.init.text+0xa4)
+ {standard input}: Error: displacement to undefined symbol .L271 overflows 12-bit field: => 1625
+ {standard input}: Error: displacement to undefined symbol .L271 overflows 8-bit field : => 1634
+ {standard input}: Error: displacement to undefined symbol .L318 overflows 8-bit field : => 1711, 1693, 1681, 1665
+ {standard input}: Error: pcrel too far: => 1644, 1685, 1700, 1672, 1649, 1656, 1667, 1695, 1655, 1702, 1660, 1609, 1684, 1657, 1632, 1618, 1698, 1629, 1635, 1676, 1673, 1670, 1686, 1705
+ {standard input}: Error: unknown opcode: => 1713
4 error improvements:
- /kisskb/src/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c: error: case label does not reduce to an integer constant: 4917:4 =>
- /kisskb/src/drivers/scsi/aacraid/commsup.c: error: case label does not reduce to an integer constant: 1983:2 =>
- error: arch/sparc/kernel/head_32.o: relocation truncated to fit: R_SPARC_WDISP22 against `.init.text': (.head.text+0x5100), (.head.text+0x5040) =>
- error: arch/sparc/kernel/head_32.o: relocation truncated to fit: R_SPARC_WDISP22 against symbol `leon_smp_cpu_startup' defined in .text section in arch/sparc/kernel/trampoline_32.o: (.init.text+0xa4) =>
*** WARNINGS ***
11 warning regressions:
+ .config: warning: override: ARCH_RV32I changes choice state: => 3864
+ arch/m68k/configs/multi_defconfig: warning: symbol value 'm' invalid for ZPOOL: => 61
+ arch/m68k/configs/sun3_defconfig: warning: symbol value 'm' invalid for ZPOOL: => 37
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47b0): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47c8): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47e0): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47f8): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4810): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4828): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4840): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: => N/A
+ modpost: WARNING: modpost: vmlinux.o(.text.unlikely+0x52bc): Section mismatch in reference from the function __trace_event_discard_commit() to the variable .init.data:initcall_level_names: => N/A
11 warning improvements:
- .config: warning: override: reassigning to symbol GCC_PLUGIN_RANDSTRUCT: 12253, 12475 =>
- /kisskb/src/drivers/scsi/mpt3sas/mpt3sas_base.c: warning: array subscript 'Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds]: 5400:40, 5396:40, 5403:43 =>
- /kisskb/src/drivers/tty/serial/sh-sci.c: warning: unused variable 'sport' [-Wunused-variable]: 2651:26 =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4790): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47a8): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47c0): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47d8): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x47f0): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4808): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: drivers/net/ethernet/qlogic/qede/qede.o(.data+0x4820): Section mismatch in reference from the variable qede_forced_speed_maps to the variable .init.rodata:qede_forced_speed_100000: N/A =>
- modpost: WARNING: modpost: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference from the function __trace_event_discard_commit() to the variable .init.data:initcall_level_names: N/A =>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2022-07-18 7:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-17 21:02 Linux 5.19-rc7 Linus Torvalds
2022-07-18 2:32 ` Guenter Roeck
2022-07-18 7:43 ` Geert Uytterhoeven [this message]
2022-07-18 7:51 ` Build regressions/improvements in v5.19-rc7 Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220718074308.3801763-1-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®