From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Oliver Upton <oupton@google.com>, Peter Shier <pshier@google.com>
Subject: [PATCH v4 03/24] KVM: x86: Don't check for code breakpoints when emulating on exception
Date: Sat, 23 Jul 2022 00:51:16 +0000 [thread overview]
Message-ID: <20220723005137.1649592-4-seanjc@google.com> (raw)
In-Reply-To: <20220723005137.1649592-1-seanjc@google.com>
Don't check for code breakpoints during instruction emulation if the
emulation was triggered by exception interception. Code breakpoints are
the highest priority fault-like exception, and KVM only emulates on
exceptions that are fault-like. Thus, if hardware signaled a different
exception, then the vCPU is already passed the stage of checking for
hardware breakpoints.
This is likely a glorified nop in terms of functionality, and is more for
clarification and is technically an optimization. Intel's SDM explicitly
states vmcs.GUEST_RFLAGS.RF on exception interception is the same as the
value that would have been saved on the stack had the exception not been
intercepted, i.e. will be '1' due to all fault-like exceptions setting RF
to '1'. AMD says "guest state saved ... is the processor state as of the
moment the intercept triggers", but that begs the question, "when does
the intercept trigger?".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/kvm/x86.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5366f884e9a7..566f9512b4a3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8523,8 +8523,24 @@ int kvm_skip_emulated_instruction(struct kvm_vcpu *vcpu)
}
EXPORT_SYMBOL_GPL(kvm_skip_emulated_instruction);
-static bool kvm_vcpu_check_code_breakpoint(struct kvm_vcpu *vcpu, int *r)
+static bool kvm_vcpu_check_code_breakpoint(struct kvm_vcpu *vcpu,
+ int emulation_type, int *r)
{
+ WARN_ON_ONCE(emulation_type & EMULTYPE_NO_DECODE);
+
+ /*
+ * Do not check for code breakpoints if hardware has already done the
+ * checks, as inferred from the emulation type. On NO_DECODE and SKIP,
+ * the instruction has passed all exception checks, and all intercepted
+ * exceptions that trigger emulation have lower priority than code
+ * breakpoints, i.e. the fact that the intercepted exception occurred
+ * means any code breakpoints have already been serviced.
+ */
+ if (emulation_type & (EMULTYPE_NO_DECODE | EMULTYPE_SKIP |
+ EMULTYPE_TRAP_UD | EMULTYPE_TRAP_UD_FORCED |
+ EMULTYPE_VMWARE_GP | EMULTYPE_PF))
+ return false;
+
if (unlikely(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) &&
(vcpu->arch.guest_debug_dr7 & DR7_BP_EN_MASK)) {
struct kvm_run *kvm_run = vcpu->run;
@@ -8646,8 +8662,7 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
* are fault-like and are higher priority than any faults on
* the code fetch itself.
*/
- if (!(emulation_type & EMULTYPE_SKIP) &&
- kvm_vcpu_check_code_breakpoint(vcpu, &r))
+ if (kvm_vcpu_check_code_breakpoint(vcpu, emulation_type, &r))
return r;
r = x86_decode_emulated_instruction(vcpu, emulation_type,
--
2.37.1.359.gd136c6c3e2-goog
next prev parent reply other threads:[~2022-07-23 0:52 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-23 0:51 [PATCH v4 00/24] KVM: x86: Event/exception fixes and cleanups Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 01/24] KVM: nVMX: Unconditionally purge queued/injected events on nested "exit" Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 02/24] KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS Sean Christopherson
2022-08-01 16:00 ` Maxim Levitsky
2022-07-23 0:51 ` Sean Christopherson [this message]
2022-07-23 0:51 ` [PATCH v4 04/24] KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 05/24] KVM: nVMX: Prioritize TSS T-flag #DBs over Monitor Trap Flag Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 06/24] KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1) Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 07/24] KVM: x86: Use DR7_GD macro instead of open coding check in emulator Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 08/24] KVM: nVMX: Ignore SIPI that arrives in L2 when vCPU is not in WFS Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 09/24] KVM: nVMX: Unconditionally clear mtf_pending on nested VM-Exit Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 10/24] KVM: VMX: Inject #PF on ENCLS as "emulated" #PF Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 11/24] KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 12/24] KVM: x86: Make kvm_queued_exception a properly named, visible struct Sean Christopherson
2022-08-01 16:10 ` Maxim Levitsky
2022-07-23 0:51 ` [PATCH v4 13/24] KVM: x86: Formalize blocking of nested pending exceptions Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 14/24] KVM: x86: Use kvm_queue_exception_e() to queue #DF Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 15/24] KVM: x86: Hoist nested event checks above event injection logic Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 16/24] KVM: x86: Evaluate ability to inject SMI/NMI/IRQ after potential VM-Exit Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 17/24] KVM: nVMX: Add a helper to identify low-priority #DB traps Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 18/24] KVM: nVMX: Document priority of all known events on Intel CPUs Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 19/24] KVM: x86: Morph pending exceptions to pending VM-Exits at queue time Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 20/24] KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 21/24] KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 22/24] KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events() Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 23/24] KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes Sean Christopherson
2022-07-23 0:51 ` [PATCH v4 24/24] KVM: selftests: Add an x86-only test to verify nested exception queueing Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220723005137.1649592-4-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=oupton@google.com \
--cc=pbonzini@redhat.com \
--cc=pshier@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®