From: Ben Dooks <ben.dooks@sifive.com>
To: linux-pwm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee.jones@linaro.org>,
u.kleine-koenig@pengutronix.de,
Thierry Reding <thierry.reding@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Greentime Hu <greentime.hu@sifive.com>,
Ben Dooks <ben.dooks@sifive.com>
Subject: [[PATCH v2] 7/9] pwm: dwc: add timer clock
Date: Mon, 25 Jul 2022 22:21:38 +0100 [thread overview]
Message-ID: <20220725212140.741644-7-ben.dooks@sifive.com> (raw)
In-Reply-To: <20220725212140.741644-1-ben.dooks@sifive.com>
Add a configurable clock base rate for the pwm as when being built
for non-PCI the block may be sourced from an internal clock.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
--
v2:
- removed the ifdef and merged the other clock patch in here
---
drivers/pwm/pwm-dwc.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c
index 235cb730c888..9067f32869f8 100644
--- a/drivers/pwm/pwm-dwc.c
+++ b/drivers/pwm/pwm-dwc.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
@@ -35,7 +36,6 @@
#define DWC_TIMERS_COMP_VERSION 0xac
#define DWC_TIMERS_TOTAL 8
-#define DWC_CLK_PERIOD_NS 10
/* Timer Control Register */
#define DWC_TIM_CTRL_EN BIT(0)
@@ -54,6 +54,8 @@ struct dwc_pwm_ctx {
struct dwc_pwm {
struct pwm_chip chip;
void __iomem *base;
+ struct clk *clk;
+ unsigned int clk_ns;
struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
};
#define to_dwc_pwm(p) (container_of((p), struct dwc_pwm, chip))
@@ -96,13 +98,13 @@ static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
* periods and check are the result within HW limits between 1 and
* 2^32 periods.
*/
- tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
+ tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, dwc->clk_ns);
if (tmp < 1 || tmp > (1ULL << 32))
return -ERANGE;
low = tmp - 1;
tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
- DWC_CLK_PERIOD_NS);
+ dwc->clk_ns);
if (tmp < 1 || tmp > (1ULL << 32))
return -ERANGE;
high = tmp - 1;
@@ -177,12 +179,12 @@ static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
duty += 1;
- duty *= DWC_CLK_PERIOD_NS;
+ duty *= dwc->clk_ns;
state->duty_cycle = duty;
period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
period += 1;
- period *= DWC_CLK_PERIOD_NS;
+ period *= dwc->clk_ns;
period += duty;
state->period = period;
@@ -205,6 +207,7 @@ static struct dwc_pwm *dwc_pwm_alloc(struct device *dev)
if (!dwc)
return NULL;
+ dwc->clk_ns = 10;
dwc->chip.dev = dev;
dwc->chip.ops = &dwc_pwm_ops;
dwc->chip.npwm = DWC_TIMERS_TOTAL;
@@ -336,6 +339,14 @@ static int dwc_pwm_plat_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(dwc->base),
"failed to map IO\n");
+ dwc->clk = devm_clk_get(dev, "timer");
+ if (IS_ERR(dwc->clk))
+ return dev_err_probe(dev, PTR_ERR(dwc->clk),
+ "failed to get timer clock\n");
+
+ clk_prepare_enable(dwc->clk);
+ dwc->clk_ns = 1000000000 / clk_get_rate(dwc->clk);
+
ret = pwmchip_add(&dwc->chip);
if (ret)
return ret;
@@ -347,6 +358,7 @@ static int dwc_pwm_plat_remove(struct platform_device *pdev)
{
struct dwc_pwm *dwc = platform_get_drvdata(pdev);
+ clk_disable_unprepare(dwc->clk);
pwmchip_remove(&dwc->chip);
return 0;
}
--
2.35.1
next prev parent reply other threads:[~2022-07-25 21:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-25 21:21 [[PATCH v2] 1/9] dt-bindings: pwm: Document Synopsys DesignWare snps,pwm Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 2/9] dt-bindings: pwm: snps,pwm add pwm number Ben Dooks
2022-07-26 10:08 ` Krzysztof Kozlowski
2022-07-26 10:12 ` Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 3/9] pwm: change &pci->dev to dev in probe Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 4/9] pwm: move dwc memory alloc to own function Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 5/9] pwm: dwc: add of/platform support Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 6/9] pwm: dwc: allow driver to be built with COMPILE_TEST Ben Dooks
2022-07-25 21:21 ` Ben Dooks [this message]
2022-07-25 21:21 ` [[PATCH v2] 8/9] pwm: dwc: add snps,pwm-number to limit pwm count Ben Dooks
2022-07-25 21:21 ` [[PATCH v2] 9/9] pwm: dwc: add PWM bit unset in get_state call Ben Dooks
2022-07-25 21:27 ` [[PATCH v2] 1/9] dt-bindings: pwm: Document Synopsys DesignWare snps,pwm Ben Dooks
2022-07-26 10:05 ` Krzysztof Kozlowski
2022-07-26 10:12 ` Ben Dooks
2022-07-26 11:05 ` Krzysztof Kozlowski
2022-07-27 10:32 ` Ben Dooks
2022-07-27 12:02 ` Krzysztof Kozlowski
2022-07-27 13:21 ` Ben Dooks
2022-07-28 7:57 ` Krzysztof Kozlowski
2022-07-27 10:45 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220725212140.741644-7-ben.dooks@sifive.com \
--to=ben.dooks@sifive.com \
--cc=devicetree@vger.kernel.org \
--cc=greentime.hu@sifive.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®