From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jens Axboe <axboe@kernel.dk>,
Christian Marangi <ansuelsmth@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [net-next PATCH v5 11/14] net: dsa: qca8k: move port mirror functions to common code
Date: Wed, 27 Jul 2022 13:35:20 +0200 [thread overview]
Message-ID: <20220727113523.19742-12-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220727113523.19742-1-ansuelsmth@gmail.com>
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
drivers/net/dsa/qca/qca8k-8xxx.c | 93 ------------------------------
drivers/net/dsa/qca/qca8k-common.c | 91 +++++++++++++++++++++++++++++
drivers/net/dsa/qca/qca8k.h | 7 +++
3 files changed, 98 insertions(+), 93 deletions(-)
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index bf4dd1cd0f9d..f6ea5a82da9e 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1687,99 +1687,6 @@ qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
return ret;
}
-static int
-qca8k_port_mirror_add(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror,
- bool ingress, struct netlink_ext_ack *extack)
-{
- struct qca8k_priv *priv = ds->priv;
- int monitor_port, ret;
- u32 reg, val;
-
- /* Check for existent entry */
- if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
- return -EEXIST;
-
- ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
- if (ret)
- return ret;
-
- /* QCA83xx can have only one port set to mirror mode.
- * Check that the correct port is requested and return error otherwise.
- * When no mirror port is set, the values is set to 0xF
- */
- monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
- return -EEXIST;
-
- /* Set the monitor port */
- val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
- mirror->to_local_port);
- ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
- QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (ret)
- return ret;
-
- if (ingress) {
- reg = QCA8K_PORT_LOOKUP_CTRL(port);
- val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
- } else {
- reg = QCA8K_REG_PORT_HOL_CTRL1(port);
- val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
- }
-
- ret = regmap_update_bits(priv->regmap, reg, val, val);
- if (ret)
- return ret;
-
- /* Track mirror port for tx and rx to decide when the
- * mirror port has to be disabled.
- */
- if (ingress)
- priv->mirror_rx |= BIT(port);
- else
- priv->mirror_tx |= BIT(port);
-
- return 0;
-}
-
-static void
-qca8k_port_mirror_del(struct dsa_switch *ds, int port,
- struct dsa_mall_mirror_tc_entry *mirror)
-{
- struct qca8k_priv *priv = ds->priv;
- u32 reg, val;
- int ret;
-
- if (mirror->ingress) {
- reg = QCA8K_PORT_LOOKUP_CTRL(port);
- val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
- } else {
- reg = QCA8K_REG_PORT_HOL_CTRL1(port);
- val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
- }
-
- ret = regmap_clear_bits(priv->regmap, reg, val);
- if (ret)
- goto err;
-
- if (mirror->ingress)
- priv->mirror_rx &= ~BIT(port);
- else
- priv->mirror_tx &= ~BIT(port);
-
- /* No port set to send packet to mirror port. Disable mirror port */
- if (!priv->mirror_rx && !priv->mirror_tx) {
- val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
- ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
- QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
- if (ret)
- goto err;
- }
-err:
- dev_err(priv->dev, "Failed to del mirror port from %d", port);
-}
-
static int
qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index 8e92837781ee..c0a088418c20 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -746,3 +746,94 @@ int qca8k_port_mdb_del(struct dsa_switch *ds, int port,
return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
}
+
+int qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int monitor_port, ret;
+ u32 reg, val;
+
+ /* Check for existent entry */
+ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
+ return -EEXIST;
+
+ ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ /* QCA83xx can have only one port set to mirror mode.
+ * Check that the correct port is requested and return error otherwise.
+ * When no mirror port is set, the values is set to 0xF
+ */
+ monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ /* Set the monitor port */
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
+ mirror->to_local_port);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ return ret;
+
+ if (ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_update_bits(priv->regmap, reg, val, val);
+ if (ret)
+ return ret;
+
+ /* Track mirror port for tx and rx to decide when the
+ * mirror port has to be disabled.
+ */
+ if (ingress)
+ priv->mirror_rx |= BIT(port);
+ else
+ priv->mirror_tx |= BIT(port);
+
+ return 0;
+}
+
+void qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg, val;
+ int ret;
+
+ if (mirror->ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, reg, val);
+ if (ret)
+ goto err;
+
+ if (mirror->ingress)
+ priv->mirror_rx &= ~BIT(port);
+ else
+ priv->mirror_tx &= ~BIT(port);
+
+ /* No port set to send packet to mirror port. Disable mirror port */
+ if (!priv->mirror_rx && !priv->mirror_tx) {
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ goto err;
+ }
+err:
+ dev_err(priv->dev, "Failed to del mirror port from %d", port);
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index 9da7928de83c..3a2131b7abfa 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -494,4 +494,11 @@ int qca8k_port_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct dsa_db db);
+/* Common port mirror function */
+int qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack);
+void qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
+
#endif /* __QCA8K_H */
--
2.36.1
next prev parent reply other threads:[~2022-07-27 11:36 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-27 11:35 [net-next PATCH v5 00/14] net: dsa: qca8k: code split for qca8k Christian Marangi
2022-07-27 11:35 ` [net-next PATCH v5 01/14] net: dsa: qca8k: cache match data to speed up access Christian Marangi
2022-07-27 14:50 ` Vladimir Oltean
2022-07-29 21:31 ` Florian Fainelli
2022-09-14 20:06 ` Regression: qca8k_sw_probe crashes (Was: Re: [net-next PATCH v5 01/14] net: dsa: qca8k: cache match data to speed up access) Pali Rohár
2022-09-14 20:08 ` Vladimir Oltean
2022-09-14 20:12 ` Pali Rohár
2022-07-27 11:35 ` [net-next PATCH v5 02/14] net: dsa: qca8k: make mib autocast feature optional Christian Marangi
2022-07-27 14:50 ` Vladimir Oltean
2022-07-29 21:32 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 03/14] net: dsa: qca8k: move mib struct to common code Christian Marangi
2022-07-29 21:33 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 04/14] net: dsa: qca8k: move qca8k read/write/rmw and reg table " Christian Marangi
2022-07-29 21:34 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 05/14] net: dsa: qca8k: move qca8k bulk read/write helper " Christian Marangi
2022-07-29 21:35 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 06/14] net: dsa: qca8k: move mib init function " Christian Marangi
2022-07-27 14:51 ` Vladimir Oltean
2022-07-29 21:35 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 07/14] net: dsa: qca8k: move port set status/eee/ethtool stats " Christian Marangi
2022-07-29 21:37 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 08/14] net: dsa: qca8k: move bridge functions " Christian Marangi
2022-07-29 21:38 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 09/14] net: dsa: qca8k: move set age/MTU/port enable/disable " Christian Marangi
2022-07-27 14:55 ` Vladimir Oltean
2022-07-29 21:39 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 10/14] net: dsa: qca8k: move port FDB/MDB function " Christian Marangi
2022-07-27 14:54 ` Vladimir Oltean
2022-07-29 21:40 ` Florian Fainelli
2022-07-27 11:35 ` Christian Marangi [this message]
2022-07-29 21:40 ` [net-next PATCH v5 11/14] net: dsa: qca8k: move port mirror functions " Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 12/14] net: dsa: qca8k: move port VLAN " Christian Marangi
2022-07-29 21:41 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 13/14] net: dsa: qca8k: move port LAG " Christian Marangi
2022-07-29 21:42 ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 14/14] net: dsa: qca8k: move read_switch_id function " Christian Marangi
2022-07-27 14:52 ` Vladimir Oltean
2022-07-29 5:30 ` [net-next PATCH v5 00/14] net: dsa: qca8k: code split for qca8k patchwork-bot+netdevbpf
2022-07-29 21:42 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220727113523.19742-12-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®