Re: [PATCH v4] can: mcp251x: Fix race condition on receive interrupt

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1753 bytes --]

On 04.08.2022 10:14:11, Sebastian Würl wrote:
> The mcp251x driver uses both receiving mailboxes of the CAN controller
> chips. For retrieving the CAN frames from the controller via SPI, it checks
> once per interrupt which mailboxes have been filled and will retrieve the
> messages accordingly.
> 
> This introduces a race condition, as another CAN frame can enter mailbox 1
> while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until
> the interrupt handler is called next, mailbox 0 is emptied before
> mailbox 1, leading to out-of-order CAN frames in the network device.
> 
> This is fixed by checking the interrupt flags once again after freeing
> mailbox 0, to correctly also empty mailbox 1 before leaving the handler.
> 
> For reproducing the bug I created the following setup:
>  - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any.
>  - Setup CAN to 1 MHz
>  - Spam bursts of 5 CAN-messages with increasing CAN-ids
>  - Continue sending the bursts while sleeping a second between the bursts
>  - Check on the RPi whether the received messages have increasing CAN-ids
>  - Without this patch, every burst of messages will contain a flipped pair
> 
> Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
> Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com>

I've reduced the scope of intf1, eflag1 while applying the patch to
can-next/master.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]