From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Stephen Boyd <swboyd@chromium.org>,
Kuogee Hsieh <quic_khsieh@quicinc.com>,
Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Cc: Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] drm/msm/dp: Stop using DP id as index in desc
Date: Tue, 9 Aug 2022 20:50:08 -0700 [thread overview]
Message-ID: <20220810035013.3582848-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220810035013.3582848-1-bjorn.andersson@linaro.org>
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.
By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.
While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
1 file changed, 25 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bfd0aeff3f0d..2d9bbc335786 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -122,61 +122,41 @@ struct dp_display_private {
struct msm_dp_desc {
phys_addr_t io_start;
+ unsigned int id;
unsigned int connector_type;
bool wide_bus_en;
};
-struct msm_dp_config {
- const struct msm_dp_desc *descs;
- size_t num_descs;
-};
-
static const struct msm_dp_desc sc7180_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sc7180_dp_cfg = {
- .descs = sc7180_dp_descs,
- .num_descs = ARRAY_SIZE(sc7180_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct msm_dp_desc sc7280_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
-};
-
-static const struct msm_dp_config sc7280_dp_cfg = {
- .descs = sc7280_dp_descs,
- .num_descs = ARRAY_SIZE(sc7280_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ {}
};
static const struct msm_dp_desc sc8180x_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
-};
-
-static const struct msm_dp_config sc8180x_dp_cfg = {
- .descs = sc8180x_dp_descs,
- .num_descs = ARRAY_SIZE(sc8180x_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
+ {}
};
static const struct msm_dp_desc sm8350_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sm8350_dp_cfg = {
- .descs = sm8350_dp_descs,
- .num_descs = ARRAY_SIZE(sm8350_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct of_device_id dp_dt_match[] = {
- { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
- { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
+ { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
+ { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
@@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
return 0;
}
-static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
- unsigned int *id)
+static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
{
- const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
+ const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
struct resource *res;
int i;
@@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
if (!res)
return NULL;
- for (i = 0; i < cfg->num_descs; i++) {
- if (cfg->descs[i].io_start == res->start) {
- *id = i;
- return &cfg->descs[i];
- }
+ for (i = 0; i < descs[i].io_start; i++) {
+ if (descs[i].io_start == res->start)
+ return &descs[i];
}
dev_err(&pdev->dev, "unknown displayport instance\n");
@@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
if (!dp)
return -ENOMEM;
- desc = dp_display_get_desc(pdev, &dp->id);
+ desc = dp_display_get_desc(pdev);
if (!desc)
return -EINVAL;
dp->pdev = pdev;
dp->name = "drm_dp";
+ dp->id = desc->id;
dp->dp_display.connector_type = desc->connector_type;
dp->wide_bus_en = desc->wide_bus_en;
dp->dp_display.is_edp =
--
2.35.1
next prev parent reply other threads:[~2022-08-10 3:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-10 3:50 [PATCH 0/7] drm/msm/dp: Support for external displays Bjorn Andersson
2022-08-10 3:50 ` [PATCH 1/7] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles Bjorn Andersson
2022-08-10 13:28 ` Rob Herring
2022-08-10 14:47 ` Krzysztof Kozlowski
2022-08-10 19:20 ` Rob Herring
2022-08-11 6:43 ` Krzysztof Kozlowski
2022-08-10 3:50 ` Bjorn Andersson [this message]
2022-08-10 3:50 ` [PATCH 3/7] drm/msm/dp: Add DP and EDP compatibles for SC8280XP Bjorn Andersson
2022-08-22 20:33 ` Dmitry Baryshkov
2022-08-10 3:50 ` [PATCH 4/7] drm/msm/dp: Add SDM845 DisplayPort instance Bjorn Andersson
2022-08-22 20:34 ` Dmitry Baryshkov
2022-08-10 3:50 ` [PATCH 5/7] drm/msm/dp: Implement hpd_notify() Bjorn Andersson
2022-08-22 20:36 ` Dmitry Baryshkov
2022-08-10 3:50 ` [PATCH 6/7] drm/msm/dp: Don't enable HPD interrupts for edp Bjorn Andersson
2022-08-22 20:36 ` Dmitry Baryshkov
2022-08-10 3:50 ` [PATCH 7/7] drm/msm/dp: HPD handling relates to next_bridge Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220810035013.3582848-3-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=quic_sbillaka@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®